Mops
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2011, 04:48:01 AM |
|
i think i will have to format c:/ i am not being able to solve de problem, tries reinstalind, using sdk 2.4, 2.2, and not using any. now i get this screen: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimg705.imageshack.us%2Fimg705%2F2861%2Ferrorpp.jpg&t=665&c=2eMuWJuo_GL6Ng) Uploaded with ImageShack.us
|
|
|
|
luffy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2011, 04:55:01 AM |
|
5850 will not exceed 150W with a mild oc (not above 800MHz). i had 2x5850 with a 500W PSU for a while, ofcourse my rig is a dedicated one with a single core Sempron, 1GB ram , one 2.5" disk, etc before any format make sure you have uninstalled all the ATI drivers and sdk and install only the full catalyst 11.3 or 11.5 with _ocl. nothing more, i think you will be ok ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
Mops
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2011, 12:33:47 PM Last edit: June 03, 2011, 02:35:27 PM by Mops |
|
5850 will not exceed 150W with a mild oc (not above 800MHz). i had 2x5850 with a 500W PSU for a while, ofcourse my rig is a dedicated one with a single core Sempron, 1GB ram , one 2.5" disk, etc before any format make sure you have uninstalled all the ATI drivers and sdk and install only the full catalyst 11.3 or 11.5 with _ocl. nothing more, i think you will be ok ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) reinstalled, in several ways using the sdk from catalyst using 2.2 using 2.4 using kernel 1.6 kernel1.8. it seems i will have to format :S
|
|
|
|
klayus
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2011, 01:47:14 PM |
|
i found that using phatk gives me 25MH/s more on a 5870 and 4 more on a 4850 than using poclbm. also using bigger worksize helps with mh/s - with poclbm mh/s 's dont change with worksize change but on phatk i can use 256 for a 10 percent increase. same with 4850. hopes this helps donate if you feel like it ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) 1KRfmENZaRbS27ViorpNbaKZoyNiKtGrWh
|
|
|
|
dishwara
Legendary
Offline
Activity: 1855
Merit: 1016
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2011, 03:05:44 PM |
|
5850 will not exceed 150W with a mild oc (not above 800MHz). i had 2x5850 with a 500W PSU for a while, ofcourse my rig is a dedicated one with a single core Sempron, 1GB ram , one 2.5" disk, etc before any format make sure you have uninstalled all the ATI drivers and sdk and install only the full catalyst 11.3 or 11.5 with _ocl. nothing more, i think you will be ok ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) reinstalled, in several ways using the sdk from catalyst using 2.2 using 2.4 using kernel 1.6 kernel1.8. it seems i will have to format :S Use driver sweeper from http://phyxion.net/item/driver-sweeper.html & remove all the AMD drivers. Also, after removing go to safe mode & run again. which will remove every instance of AMD driver. Then install fresh one. Go for latest 11.5 & 2.4 & instead of express install, go for custom install & ONLY install these 3, ATI display driver, ATI catalyst install manager, APP 2.4 & if needed vc++. You will be able to mine with out formating. Also, don't use askrate & worksize for now.
|
|
|
|
krayzie32
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 479
Merit: 250
https://streamies.io/
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2011, 05:18:57 PM |
|
Thanks! Using: -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false WORKSIZE=256 AGGRESSION=13 on a single 5830 and get 312MH/sec ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) I have always found phatk to be slower. Why did you choose to use it? Also, why WORKSIZE=256? I have also found 128 to be faster on the 58xx and 69xx series. I am using poclbm at the moment getting 0.2% stale rate [not using BTCMine at the moment though]. I have 7 different computers running 5830s and 256 gives about 5m more than 128. I run mine at 975 clock, 300 memory and I get about 300MH/sec. I love these 5830s only cost $100 but can push out 300MH/sec!
|
|
|
|
Mops
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2011, 06:13:35 AM |
|
5850 will not exceed 150W with a mild oc (not above 800MHz). i had 2x5850 with a 500W PSU for a while, ofcourse my rig is a dedicated one with a single core Sempron, 1GB ram , one 2.5" disk, etc before any format make sure you have uninstalled all the ATI drivers and sdk and install only the full catalyst 11.3 or 11.5 with _ocl. nothing more, i think you will be ok ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) reinstalled, in several ways using the sdk from catalyst using 2.2 using 2.4 using kernel 1.6 kernel1.8. it seems i will have to format :S Use driver sweeper from http://phyxion.net/item/driver-sweeper.html & remove all the AMD drivers. Also, after removing go to safe mode & run again. which will remove every instance of AMD driver. Then install fresh one. Go for latest 11.5 & 2.4 & instead of express install, go for custom install & ONLY install these 3, ATI display driver, ATI catalyst install manager, APP 2.4 & if needed vc++. You will be able to mine with out formating. Also, don't use askrate & worksize for now. THANKS A LOT had to uninstall using both the driver sweeper, and using the catalyst setup, then i installed 11.5 the way you said and now it seems to work ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
5tr1k3r
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2011, 01:29:32 PM |
|
I'm sorry, which askrate is used by default? I have 5770 and would like to know if I should set it by myself.
|
|
|
|
5tr1k3r
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2011, 03:11:21 PM |
|
Oh, actually, I found the answer on the second page. As for askrate, it's not necessary with Phoenix because it maintains a work queue and only requests work when needed. Phoenix also ignores the askrate setting automatically for RPC servers with long polling support.
I use deepbit.net (RPC+LP), so it makes changing the askrate setting pointless, as I see.
|
|
|
|
dishwara
Legendary
Offline
Activity: 1855
Merit: 1016
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2011, 05:26:22 PM |
|
5850 will not exceed 150W with a mild oc (not above 800MHz). i had 2x5850 with a 500W PSU for a while, ofcourse my rig is a dedicated one with a single core Sempron, 1GB ram , one 2.5" disk, etc before any format make sure you have uninstalled all the ATI drivers and sdk and install only the full catalyst 11.3 or 11.5 with _ocl. nothing more, i think you will be ok ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) reinstalled, in several ways using the sdk from catalyst using 2.2 using 2.4 using kernel 1.6 kernel1.8. it seems i will have to format :S Use driver sweeper from http://phyxion.net/item/driver-sweeper.html & remove all the AMD drivers. Also, after removing go to safe mode & run again. which will remove every instance of AMD driver. Then install fresh one. Go for latest 11.5 & 2.4 & instead of express install, go for custom install & ONLY install these 3, ATI display driver, ATI catalyst install manager, APP 2.4 & if needed vc++. You will be able to mine with out formating. Also, don't use askrate & worksize for now. THANKS A LOT had to uninstall using both the driver sweeper, and using the catalyst setup, then i installed 11.5 the way you said and now it seems to work ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Nice, after some time, send me some bitcoins. Also for CPU usage try this. http://forum.bitcoin.org/index.php?topic=6188.msg168009#msg168009
|
|
|
|
dober64
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2011, 09:14:32 PM |
|
jedi95 Hello! Help me please! Why this error?
Traceback (most recent call last): File "phoenix.py", line 26, in <module> File "zipextimporter.pyc", line 82, in load_module File "twisted\internet\reactor.pyc", line 38, in <module> File "twisted\internet\selectreactor.pyc", line 200, in install File "twisted\internet\selectreactor.pyc", line 72, in __init__ File "twisted\internet\base.pyc", line 489, in __init__ File "twisted\internet\posixbase.pyc", line 266, in installWaker File "twisted\internet\posixbase.pyc", line 74, in __init__ File "<string>", line 1, in connect socket.error: [Errno 10061] ╧юфъы■ўxэшx эx єёЄpэютыxэю,
|
|
|
|
error
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2011, 09:54:41 PM |
|
jedi95 Hello! Help me please! Why this error?
Traceback (most recent call last): File "phoenix.py", line 26, in <module> File "zipextimporter.pyc", line 82, in load_module File "twisted\internet\reactor.pyc", line 38, in <module> File "twisted\internet\selectreactor.pyc", line 200, in install File "twisted\internet\selectreactor.pyc", line 72, in __init__ File "twisted\internet\base.pyc", line 489, in __init__ File "twisted\internet\posixbase.pyc", line 266, in installWaker File "twisted\internet\posixbase.pyc", line 74, in __init__ File "<string>", line 1, in connect socket.error: [Errno 10061] ╧юфъы■ўxэшx эx єёЄpэютыxэю,
Your pool is down. Go seek help with the pool operator.
|
3KzNGwzRZ6SimWuFAgh4TnXzHpruHMZmV8
|
|
|
Veldy
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 98
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2011, 10:33:09 PM |
|
jedi95 Hello! Help me please! Why this error?
Traceback (most recent call last): File "phoenix.py", line 26, in <module> File "zipextimporter.pyc", line 82, in load_module File "twisted\internet\reactor.pyc", line 38, in <module> File "twisted\internet\selectreactor.pyc", line 200, in install File "twisted\internet\selectreactor.pyc", line 72, in __init__ File "twisted\internet\base.pyc", line 489, in __init__ File "twisted\internet\posixbase.pyc", line 266, in installWaker File "twisted\internet\posixbase.pyc", line 74, in __init__ File "<string>", line 1, in connect socket.error: [Errno 10061] ╧юфъы■ўxэшx эx єёЄpэютыxэю,
Your pool is down. Go seek help with the pool operator. And post a message to the author of Phoenix. It shouldn't be faulting like that [it rarely continues after such a stack trace is dumped to the console and it, at least for me, has continued to consume ~50% of my GPU doing only God knows what], instead, it should be handling such scenarios gracefully [and perhaps shut itself down].
|
If you have found my post helpful, please donate what you feel it is worth: 18vaZ4K62WiL6W2Qoj9AE1cerfCHRaUW4x
|
|
|
frakt
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2011, 10:07:18 AM |
|
My hashrate is waaaayy too low for my cards. I need some help getting them to work like they should! Here's my hashrates https://i.imgur.com/OSlvj.pngHere's my GPU Load https://i.imgur.com/ZuJxJ.pngI have 2 machines running 2 HD6990 each with driver 11.5 and SDK 2.4 in Ubuntu 11.04 I run ./phoenix.py -u http://user.worker@pool.com:port/ -k poclbm DEVICE=0 VECTORS AGGRESSION=11 FASTLOOP=false BFI_INT I've tried different AGGRESSION values, tried with and without FASTLOOP and VECTORS and BFI_INT but it doesn't seem to get any better than this. Agression 13 makes the machines feel slow. Haven't tried higher. CPU load is 100% when mining. GPU Temperatures are around 80-90 degrees. I should be able to get 350-375 MHash/sec per worker, right? What should I do to get this?
|
|
|
|
5tr1k3r
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2011, 11:23:21 AM |
|
Looks like nothing much to worry about, but maybe it can help you trace some bugs or something. Pool is deepbit.net, -k phatk DEVICE=0 VECTORS BFI_INT FASTLOOP=false AGGRESSION=12 Card's 5770 950/309. http://up.idiaths.ru/?id=eb9a9bf1e5c62d07
|
|
|
|
5tr1k3r
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2011, 11:38:38 AM |
|
... I have 2 machines running 2 HD6990 each with driver 11.5 and SDK 2.4 in Ubuntu 11.04 I run ./phoenix.py -u http://user.worker@pool.com:port/ -k poclbm DEVICE=0 VECTORS AGGRESSION=11 FASTLOOP=false BFI_INT I've tried different AGGRESSION values, tried with and without FASTLOOP and VECTORS and BFI_INT but it doesn't seem to get any better than this. Agression 13 makes the machines feel slow. Haven't tried higher. CPU load is 100% when mining. GPU Temperatures are around 80-90 degrees. I should be able to get 350-375 MHash/sec per worker, right? What should I do to get this? Have you tried phatk kernel (-k phatk)? Also try to underclock memory. It will decrease overall temp giving you the possibility to increase your gpu clocks a little bit. And also it should enhance mhash/s performance.
|
|
|
|
shackleford
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2011, 03:36:21 PM |
|
I have been using Phoenix solo for a few days now with a decent hasrate. I finaly got 1 accepted and I thought that would mean that I finaly solved a block. However nothing ever showed up in the bitcoin client and there is still zero in the rejected.
Is there some other possibility I am missing?
|
|
|
|
error
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2011, 08:04:11 PM |
|
I have been using Phoenix solo for a few days now with a decent hasrate. I finaly got 1 accepted and I thought that would mean that I finaly solved a block. However nothing ever showed up in the bitcoin client and there is still zero in the rejected.
Is there some other possibility I am missing?
The Bitcoin client doesn't show generated blocks at all until after 2 confirmations. I don't know why this is. You've probably already seen it appear by now.
|
3KzNGwzRZ6SimWuFAgh4TnXzHpruHMZmV8
|
|
|
yamato57
Newbie
Offline
Activity: 24
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2011, 08:31:38 PM |
|
Hi im new to bit mining and i am running dual MSI 6990s and they run at 333.33 mhash/sec per GPU which gives me the total of 1332 MHASH/SEC. Is this normal?? I want to try an overclock it as well, can anyone give me tips on how to do that and what rate should i be going at per card or per GPU?? ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) oh btw im also running my SAPPHIRE 5770 1GB on another computer and it only gives me 125.66 mhash/sec. On the wiki it saids i should be going at 156.83 at core of 850. what am i doing wrong? C:\Users\Username\Desktop\phoenix\phoenix.exe -u username:password@deepbit.net:8332/ -k poclbm DEVICE=0 VECTORS BFI_INT AGGRESSION=8 WORKSIZE=128
|
|
|
|
kokojie
Legendary
Offline
Activity: 1806
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2011, 09:25:13 PM |
|
I find that even aggression 1 is driving temperature too high (80C) for my card (ATI 6770), how do I set the speed even lower? I currently get 130 Mhash/s but I'm ok with lower speed if I could get my GPU temperature down to 70 level.
|
btc: 15sFnThw58hiGHYXyUAasgfauifTEB1ZF6
|
|
|
|