skunk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 03:58:47 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
next one: g++ -g -O2 -L/usr/local/cuda/lib64 -o skminer hash/skminer-CBlock.o hash/skminer-Connection.o hash/skminer-DDOS_Filter.o hash/skminer-DDOS_Score.o hash/skminer-Keccak-compact64.o hash/skminer-KeccakDuplex.o hash/skminer-KeccakHash.o hash/skminer-KeccakSponge.o hash/skminer-Miner.o hash/skminer-MinerThread.o hash/skminer-Outbound.o hash/skminer-Packet.o hash/skminer-skein.o hash/skminer-skein_block.o hash/skminer-Timer.o skminer-cpu-miner.o skminer-util.o heavy/heavy.o Algo/cuda_skein1024.o Algo/sk1024.o Algo/sk1024_keccak.o -lcurl -lssl -lcrypto -lssl -lcrypto -lz -ljansson -lcudart -static-libstdc++ -fopenmp -lcrypto -lssl -L/usr/local/lib -lboost_filesystem -lboost_system -lboost_program_options -lboost_thread -lcrypto -lssl hash/skminer-MinerThread.o: In function `Core::MinerThread::SK1024Miner()': /home/skunk/bitcoin/skminer_source/hash/MinerThread.cpp:74: undefined reference to `scanhash_sk1024' Algo/sk1024.o: In function `scanhash_sk1024(unsigned int, unsigned int*, uint1024, unsigned long&, unsigned long, unsigned long long*)': /home/skunk/bitcoin/skminer_source/Algo/sk1024.cu:63: undefined reference to `skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' collect2: error: ld returned 1 exit status
|
|
|
|
antonio8
Legendary
Offline
Activity: 1400
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:04:23 PM |
|
@ djm34 Stupid question for you. This miner doesn't allow us to solo mine from one computer to the other, does it?
Was just curious because the skminer allows that.
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:05:58 PM |
|
@ djm34 Stupid question for you. This miner doesn't allow us to solo mine from one computer to the other, does it?
Was just curious because the skminer allows that.
which one ? (it should in principle as it uses the same code)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:13:45 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
next one: g++ -g -O2 -L/usr/local/cuda/lib64 -o skminer hash/skminer-CBlock.o hash/skminer-Connection.o hash/skminer-DDOS_Filter.o hash/skminer-DDOS_Score.o hash/skminer-Keccak-compact64.o hash/skminer-KeccakDuplex.o hash/skminer-KeccakHash.o hash/skminer-KeccakSponge.o hash/skminer-Miner.o hash/skminer-MinerThread.o hash/skminer-Outbound.o hash/skminer-Packet.o hash/skminer-skein.o hash/skminer-skein_block.o hash/skminer-Timer.o skminer-cpu-miner.o skminer-util.o heavy/heavy.o Algo/cuda_skein1024.o Algo/sk1024.o Algo/sk1024_keccak.o -lcurl -lssl -lcrypto -lssl -lcrypto -lz -ljansson -lcudart -static-libstdc++ -fopenmp -lcrypto -lssl -L/usr/local/lib -lboost_filesystem -lboost_system -lboost_program_options -lboost_thread -lcrypto -lssl hash/skminer-MinerThread.o: In function `Core::MinerThread::SK1024Miner()': /home/skunk/bitcoin/skminer_source/hash/MinerThread.cpp:74: undefined reference to `scanhash_sk1024' Algo/sk1024.o: In function `scanhash_sk1024(unsigned int, unsigned int*, uint1024, unsigned long&, unsigned long, unsigned long long*)': /home/skunk/bitcoin/skminer_source/Algo/sk1024.cu:63: undefined reference to `skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' collect2: error: ld returned 1 exit status
In miner2.h you need to remove line 7 to 8 and line 22 to 24
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
skunk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:18:36 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
next one: g++ -g -O2 -L/usr/local/cuda/lib64 -o skminer hash/skminer-CBlock.o hash/skminer-Connection.o hash/skminer-DDOS_Filter.o hash/skminer-DDOS_Score.o hash/skminer-Keccak-compact64.o hash/skminer-KeccakDuplex.o hash/skminer-KeccakHash.o hash/skminer-KeccakSponge.o hash/skminer-Miner.o hash/skminer-MinerThread.o hash/skminer-Outbound.o hash/skminer-Packet.o hash/skminer-skein.o hash/skminer-skein_block.o hash/skminer-Timer.o skminer-cpu-miner.o skminer-util.o heavy/heavy.o Algo/cuda_skein1024.o Algo/sk1024.o Algo/sk1024_keccak.o -lcurl -lssl -lcrypto -lssl -lcrypto -lz -ljansson -lcudart -static-libstdc++ -fopenmp -lcrypto -lssl -L/usr/local/lib -lboost_filesystem -lboost_system -lboost_program_options -lboost_thread -lcrypto -lssl hash/skminer-MinerThread.o: In function `Core::MinerThread::SK1024Miner()': /home/skunk/bitcoin/skminer_source/hash/MinerThread.cpp:74: undefined reference to `scanhash_sk1024' Algo/sk1024.o: In function `scanhash_sk1024(unsigned int, unsigned int*, uint1024, unsigned long&, unsigned long, unsigned long long*)': /home/skunk/bitcoin/skminer_source/Algo/sk1024.cu:63: undefined reference to `skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' collect2: error: ld returned 1 exit status
In miner2.h you need to remove line 7 to 8 and line 22 to 24 got again the same errors (even after make clean)
|
|
|
|
hero18688
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:19:22 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
What's the oc value for your 750ti? I am using precisionX 5.2.4.Every time I reboot.GPU Temp target of GPU 1,2,3 is back to 0% ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F0pePY9i.png&t=665&c=RJYI-PKH8LoaCQ)
|
|
|
|
antonio8
Legendary
Offline
Activity: 1400
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:23:46 PM |
|
@ djm34 Stupid question for you. This miner doesn't allow us to solo mine from one computer to the other, does it?
Was just curious because the skminer allows that.
which one ? (it should in principle as it uses the same code) From post 1,445: https://bitcointalk.org/index.php?topic=657601.msg9287828#msg9287828When I try your new one I get this "The procedure entry point clRelease could not be located in the dynamic link library OpenCl.dll" EDIT: When I run it on the rig with the wallet, it starts but closes after a few seconds. Tried to add pause but no message comes up. It just sits there.
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:29:16 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
What's the oc value for your 750ti? I am using precisionX 5.2.4.Every time I reboot.GPU Temp target of GPU 1,2,3 is back to 0% right now I use +150/+150 (core/mem) +13mV (with msi AB) core clock 1320MHz mem clock 2900MHz
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:31:21 PM |
|
@ djm34 Stupid question for you. This miner doesn't allow us to solo mine from one computer to the other, does it?
Was just curious because the skminer allows that.
which one ? (it should in principle as it uses the same code) From post 1,445: https://bitcointalk.org/index.php?topic=657601.msg9287828#msg9287828When I try your new one I get this "The procedure entry point clRelease could not be located in the dynamic link library OpenCl.dll" EDIT: When I run it on the rig with the wallet, it starts but closes after a few seconds. Tried to add pause but no message comes up. It just sits there. not sure what to see on post 1445. which opencl version is there on your computer ? may-be a problem with the version you are using...
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:35:11 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
next one: g++ -g -O2 -L/usr/local/cuda/lib64 -o skminer hash/skminer-CBlock.o hash/skminer-Connection.o hash/skminer-DDOS_Filter.o hash/skminer-DDOS_Score.o hash/skminer-Keccak-compact64.o hash/skminer-KeccakDuplex.o hash/skminer-KeccakHash.o hash/skminer-KeccakSponge.o hash/skminer-Miner.o hash/skminer-MinerThread.o hash/skminer-Outbound.o hash/skminer-Packet.o hash/skminer-skein.o hash/skminer-skein_block.o hash/skminer-Timer.o skminer-cpu-miner.o skminer-util.o heavy/heavy.o Algo/cuda_skein1024.o Algo/sk1024.o Algo/sk1024_keccak.o -lcurl -lssl -lcrypto -lssl -lcrypto -lz -ljansson -lcudart -static-libstdc++ -fopenmp -lcrypto -lssl -L/usr/local/lib -lboost_filesystem -lboost_system -lboost_program_options -lboost_thread -lcrypto -lssl hash/skminer-MinerThread.o: In function `Core::MinerThread::SK1024Miner()': /home/skunk/bitcoin/skminer_source/hash/MinerThread.cpp:74: undefined reference to `scanhash_sk1024' Algo/sk1024.o: In function `scanhash_sk1024(unsigned int, unsigned int*, uint1024, unsigned long&, unsigned long, unsigned long long*)': /home/skunk/bitcoin/skminer_source/Algo/sk1024.cu:63: undefined reference to `skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' collect2: error: ld returned 1 exit status
In miner2.h you need to remove line 7 to 8 and line 22 to 24 got again the same errors (even after make clean) try to remove line 8-9 and line 15 in sk1024.cu (extern "C" { and the "}")
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
antonio8
Legendary
Offline
Activity: 1400
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:35:46 PM |
|
@ djm34 Stupid question for you. This miner doesn't allow us to solo mine from one computer to the other, does it?
Was just curious because the skminer allows that.
which one ? (it should in principle as it uses the same code) From post 1,445: https://bitcointalk.org/index.php?topic=657601.msg9287828#msg9287828When I try your new one I get this "The procedure entry point clRelease could not be located in the dynamic link library OpenCl.dll" EDIT: When I run it on the rig with the wallet, it starts but closes after a few seconds. Tried to add pause but no message comes up. It just sits there. not sure what to see on post 1445. which opencl version is there on your computer ? may-be a problem with the version you are using... Sorry, I thought you meant what miner I was using to solo mine. That is what that post was for. I'll try and update the opencl and see if that helps (I have no idea what version I am on).
|
If you are going to leave your BTC on an exchange please send it to this address instead 1GH3ub3UUHbU5qDJW5u3E9jZ96ZEmzaXtG, I will at least use the money better than someone who steals it from the exchange. Thanks ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:40:53 PM |
|
@ djm34 Stupid question for you. This miner doesn't allow us to solo mine from one computer to the other, does it?
Was just curious because the skminer allows that.
which one ? (it should in principle as it uses the same code) From post 1,445: https://bitcointalk.org/index.php?topic=657601.msg9287828#msg9287828When I try your new one I get this "The procedure entry point clRelease could not be located in the dynamic link library OpenCl.dll" EDIT: When I run it on the rig with the wallet, it starts but closes after a few seconds. Tried to add pause but no message comes up. It just sits there. not sure what to see on post 1445. which opencl version is there on your computer ? may-be a problem with the version you are using... Sorry, I thought you meant what miner I was using to solo mine. That is what that post was for. I'll try and update the opencl and see if that helps (I have no idea what version I am on). that was my question and still is (however I assume it is the amd one), because there is no link to any amd miner on that post. The amd miner was released later on. However all the miners (amd/prime/nvidia) use the same logic to connect to the wallet. So if it works for one, it should work for the others.
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
skunk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:41:23 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
next one: g++ -g -O2 -L/usr/local/cuda/lib64 -o skminer hash/skminer-CBlock.o hash/skminer-Connection.o hash/skminer-DDOS_Filter.o hash/skminer-DDOS_Score.o hash/skminer-Keccak-compact64.o hash/skminer-KeccakDuplex.o hash/skminer-KeccakHash.o hash/skminer-KeccakSponge.o hash/skminer-Miner.o hash/skminer-MinerThread.o hash/skminer-Outbound.o hash/skminer-Packet.o hash/skminer-skein.o hash/skminer-skein_block.o hash/skminer-Timer.o skminer-cpu-miner.o skminer-util.o heavy/heavy.o Algo/cuda_skein1024.o Algo/sk1024.o Algo/sk1024_keccak.o -lcurl -lssl -lcrypto -lssl -lcrypto -lz -ljansson -lcudart -static-libstdc++ -fopenmp -lcrypto -lssl -L/usr/local/lib -lboost_filesystem -lboost_system -lboost_program_options -lboost_thread -lcrypto -lssl hash/skminer-MinerThread.o: In function `Core::MinerThread::SK1024Miner()': /home/skunk/bitcoin/skminer_source/hash/MinerThread.cpp:74: undefined reference to `scanhash_sk1024' Algo/sk1024.o: In function `scanhash_sk1024(unsigned int, unsigned int*, uint1024, unsigned long&, unsigned long, unsigned long long*)': /home/skunk/bitcoin/skminer_source/Algo/sk1024.cu:63: undefined reference to `skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' collect2: error: ld returned 1 exit status
In miner2.h you need to remove line 7 to 8 and line 22 to 24 got again the same errors (even after make clean) try to remove line 8-9 and line 15 in sk1024.cu (extern "C" { and the "}") unfortunately still the same...
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:57:15 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
next one: g++ -g -O2 -L/usr/local/cuda/lib64 -o skminer hash/skminer-CBlock.o hash/skminer-Connection.o hash/skminer-DDOS_Filter.o hash/skminer-DDOS_Score.o hash/skminer-Keccak-compact64.o hash/skminer-KeccakDuplex.o hash/skminer-KeccakHash.o hash/skminer-KeccakSponge.o hash/skminer-Miner.o hash/skminer-MinerThread.o hash/skminer-Outbound.o hash/skminer-Packet.o hash/skminer-skein.o hash/skminer-skein_block.o hash/skminer-Timer.o skminer-cpu-miner.o skminer-util.o heavy/heavy.o Algo/cuda_skein1024.o Algo/sk1024.o Algo/sk1024_keccak.o -lcurl -lssl -lcrypto -lssl -lcrypto -lz -ljansson -lcudart -static-libstdc++ -fopenmp -lcrypto -lssl -L/usr/local/lib -lboost_filesystem -lboost_system -lboost_program_options -lboost_thread -lcrypto -lssl hash/skminer-MinerThread.o: In function `Core::MinerThread::SK1024Miner()': /home/skunk/bitcoin/skminer_source/hash/MinerThread.cpp:74: undefined reference to `scanhash_sk1024' Algo/sk1024.o: In function `scanhash_sk1024(unsigned int, unsigned int*, uint1024, unsigned long&, unsigned long, unsigned long long*)': /home/skunk/bitcoin/skminer_source/Algo/sk1024.cu:63: undefined reference to `skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' collect2: error: ld returned 1 exit status
In miner2.h you need to remove line 7 to 8 and line 22 to 24 got again the same errors (even after make clean) try to remove line 8-9 and line 15 in sk1024.cu (extern "C" { and the "}") unfortunately still the same... ok this is strange... there is no skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' it should be unsigned long long, unsigned long long* Can you add after the last include in skein1024.cu "typedef uint64_t unsigned long long" edit: "typedef unsigned long long uint64_t;" not what I wrote before... sorry
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
Namsbreh
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 04:59:51 PM |
|
I have a 6 card (750ti) rig solo mining, speed is approx 75mh, 2 cards are stone cold, I think only 4 cards are mining.
Before I start to investigate, am I missing something really obvious, my launch config is skminer.exe 127.0.0.1 9325 6
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 05:07:06 PM |
|
I have a 6 card (750ti) rig solo mining, speed is approx 75mh, 2 cards are stone cold, I think only 4 cards are mining.
Before I start to investigate, am I missing something really obvious, my launch config is skminer.exe 127.0.0.1 9325 6
try the new version I published, also how many core/thread has your cpu ?
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
skunk
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 05:12:28 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
next one: g++ -g -O2 -L/usr/local/cuda/lib64 -o skminer hash/skminer-CBlock.o hash/skminer-Connection.o hash/skminer-DDOS_Filter.o hash/skminer-DDOS_Score.o hash/skminer-Keccak-compact64.o hash/skminer-KeccakDuplex.o hash/skminer-KeccakHash.o hash/skminer-KeccakSponge.o hash/skminer-Miner.o hash/skminer-MinerThread.o hash/skminer-Outbound.o hash/skminer-Packet.o hash/skminer-skein.o hash/skminer-skein_block.o hash/skminer-Timer.o skminer-cpu-miner.o skminer-util.o heavy/heavy.o Algo/cuda_skein1024.o Algo/sk1024.o Algo/sk1024_keccak.o -lcurl -lssl -lcrypto -lssl -lcrypto -lz -ljansson -lcudart -static-libstdc++ -fopenmp -lcrypto -lssl -L/usr/local/lib -lboost_filesystem -lboost_system -lboost_program_options -lboost_thread -lcrypto -lssl hash/skminer-MinerThread.o: In function `Core::MinerThread::SK1024Miner()': /home/skunk/bitcoin/skminer_source/hash/MinerThread.cpp:74: undefined reference to `scanhash_sk1024' Algo/sk1024.o: In function `scanhash_sk1024(unsigned int, unsigned int*, uint1024, unsigned long&, unsigned long, unsigned long long*)': /home/skunk/bitcoin/skminer_source/Algo/sk1024.cu:63: undefined reference to `skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' collect2: error: ld returned 1 exit status
In miner2.h you need to remove line 7 to 8 and line 22 to 24 got again the same errors (even after make clean) try to remove line 8-9 and line 15 in sk1024.cu (extern "C" { and the "}") unfortunately still the same... ok this is strange... there is no skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' it should be unsigned long long, unsigned long long* Can you add after the last include in skein1024.cu "typedef uint64_t unsigned long long" edit: "typedef unsigned long long uint64_t;" not what I wrote before... sorry you meant Algo/sk1024.cu, right? result: nvcc -g -O2 -I . -Xptxas "-v" -gencode=arch=compute_30,code=\"sm_30,compute_30\" --ptxas-options=-v -o Algo/sk1024.o -c Algo/sk1024.cu Algo/sk1024.cu(14): error: invalid redeclaration of type name "uint64_t" /usr/include/stdint.h(55): here
Algo/sk1024.cu(77): warning: variable "pskein" was declared but never referenced
Algo/sk1024.cu(84): warning: variable "pkeccak" was declared but never referenced
|
|
|
|
djm34
Legendary
Offline
Activity: 1400
Merit: 1050
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 05:21:14 PM |
|
for the error in Keccak-compact64.cpp replace "state= argState" by "state = (tKeccakLane *)argState;" (line 189)
for the error in sk1024.cu remove "extern "C"" in front of "bool scanhash_sk1024(..." (line 33)
next one: g++ -g -O2 -L/usr/local/cuda/lib64 -o skminer hash/skminer-CBlock.o hash/skminer-Connection.o hash/skminer-DDOS_Filter.o hash/skminer-DDOS_Score.o hash/skminer-Keccak-compact64.o hash/skminer-KeccakDuplex.o hash/skminer-KeccakHash.o hash/skminer-KeccakSponge.o hash/skminer-Miner.o hash/skminer-MinerThread.o hash/skminer-Outbound.o hash/skminer-Packet.o hash/skminer-skein.o hash/skminer-skein_block.o hash/skminer-Timer.o skminer-cpu-miner.o skminer-util.o heavy/heavy.o Algo/cuda_skein1024.o Algo/sk1024.o Algo/sk1024_keccak.o -lcurl -lssl -lcrypto -lssl -lcrypto -lz -ljansson -lcudart -static-libstdc++ -fopenmp -lcrypto -lssl -L/usr/local/lib -lboost_filesystem -lboost_system -lboost_program_options -lboost_thread -lcrypto -lssl hash/skminer-MinerThread.o: In function `Core::MinerThread::SK1024Miner()': /home/skunk/bitcoin/skminer_source/hash/MinerThread.cpp:74: undefined reference to `scanhash_sk1024' Algo/sk1024.o: In function `scanhash_sk1024(unsigned int, unsigned int*, uint1024, unsigned long&, unsigned long, unsigned long long*)': /home/skunk/bitcoin/skminer_source/Algo/sk1024.cu:63: undefined reference to `skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' collect2: error: ld returned 1 exit status
In miner2.h you need to remove line 7 to 8 and line 22 to 24 got again the same errors (even after make clean) try to remove line 8-9 and line 15 in sk1024.cu (extern "C" { and the "}") unfortunately still the same... ok this is strange... there is no skein1024_cpu_hash(int, int, unsigned long, unsigned long*, int)' it should be unsigned long long, unsigned long long* Can you add after the last include in skein1024.cu "typedef uint64_t unsigned long long" edit: "typedef unsigned long long uint64_t;" not what I wrote before... sorry you meant Algo/sk1024.cu, right? result: nvcc -g -O2 -I . -Xptxas "-v" -gencode=arch=compute_30,code=\"sm_30,compute_30\" --ptxas-options=-v -o Algo/sk1024.o -c Algo/sk1024.cu Algo/sk1024.cu(14): error: invalid redeclaration of type name "uint64_t" /usr/include/stdint.h(55): here
Algo/sk1024.cu(77): warning: variable "pskein" was declared but never referenced
Algo/sk1024.cu(84): warning: variable "pkeccak" was declared but never referenced
dammit... remove the line I told you to add and replace any occurance of uint64_t in sk1024.cu by unsigned long long (I must be missing something... this shouldn't be necessary)
|
djm34 facebook pageBTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze Pledge for neoscrypt ccminer to that address: 16UoC4DmTz2pvhFvcfTQrzkPTrXkWijzXw
|
|
|
hoze
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 92
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 05:28:20 PM |
|
new sources and binaries for nvidia miner: http://ge.tt/4dUHeF32/v/0?cmain change: * support added for compute_30 (the performance are bad... but it works... not enough register for skein 1024 leading to large spill store * kernel working now with compute 5_2 * optimization of skein for compute >= 3_5 gtx750: 22.5MH/s gtx780ti: 43MH/s gtx 980: 63MH/s * possibility to select the card to be used together with new format for IP:PORT selection example Release/skminer 127.0.0.1:9325 gtx980#1,gtx980#2,gtxWhatever (in the example, the program will run on two gtx980 and ignore the gtxWhatever as it won't find it on your computer (so make sure you put names of card which exist)... alternatively 980#1,980#2 will also work (as in ccminer). If no second argument is given, it will use every card found on the system. There is may-be a limitation, as I think, the number of card should be smaller or equal to the number of cpu core/thread (need to be verified though... and I don't have enough pci port for that...) * new display format, I used supercomputing one. * added compilation for linux (it is again supercomputing one...) please let me know if it works. current hashrate on my system with this version: 193MH/s (2 gtx980, 1 gtx750 and 1 gtx780ti), cpu usage 26% (which is high compared to ccminer) Good update. With this version on stock clock I got with 6 GPU (6x750ti 2gb) ~105Mhs and all GPU work. Thanks!
|
|
|
|
go6ooo1212
Legendary
Offline
Activity: 1512
Merit: 1000
quarkchain.io
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 31, 2014, 05:43:52 PM |
|
@djm34: Thanks for the reliese , I've reached 126Mh/s with 6x 750Ti. I'll try some clocking for squeeze more power
|
|
|
|
|