[ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers

[OPTiK]

@Mylo
Yes, you are right.
I can't change Mem and Gpu clocks to lower than bios default.
I will leave 14.6 bin files and try with 14.4 drivers... everybit of energy saving is important for my power bill.

Update: Yes, with 14.4 I can change clocks up/down as I want.

Copy the .opencl files into the sgminer folder and you'll be able to control everything.

[mfqrs3]

I control gpu's with Trixx and Afterburner. With 14.4 I can lower clocks with 14.6 I can't, same sgminer and all the rest.

[wevus]

Need help, I am having a hellluva time time trying to get my saphire 6970 to run x13. It runs x11 fine @ 2.4, but when I try to run X13mod with it i just get HW errors. Could someone please post a working config for it?
Thank you for your time

[GGin]

Need help, I am having a hellluva time time trying to get my saphire 6970 to run x13. It runs x11 fine @ 2.4, but when I try to run X13mod with it i just get HW errors. Could someone please post a working config for it?
Thank you for your time

if you use driver 14.6 - try checking your x11/x13mod files by this guide, maybe it will help you:
https://bitcointalk.org/index.php?topic=658438.msg7555998#msg7555998

btw somehow my 5850 work fine without this changes and 290 not.

[Stenull]

 Any one could share hashrate on 14.4 drivers and 280x cards?

Is it confirmed that with 14.6 drivers one can not change mem clock and so on?

[thefrog]

Any one could share hashrate on 14.4 drivers and 280x cards?

Is it confirmed that with 14.6 drivers one can not change mem clock and so on?

I have 4.2 MHs on X11 with 14.6, and 3.1 on X13.
Linux, 2 gb ram.

[lobo13hf]

@Mylo
Yes, you are right.
I can't change Mem and Gpu clocks to lower than bios default.
I will leave 14.6 bin files and try with 14.4 drivers... everybit of energy saving is important for my power bill.

Update: Yes, with 14.4 I can change clocks up/down as I want.

Copy the .opencl files into the sgminer folder and you'll be able to control everything.

where do you get the .opencl files from??

[Stenull]

Any one could share hashrate on 14.4 drivers and 280x cards?

Is it confirmed that with 14.6 drivers one can not change mem clock and so on?

I have 4.2 MHs on X11 with 14.6, and 3.1 on X13.
Linux, 2 gb ram.

And you can change memclock and so on?
Was that only a windows problem under 14.6?

[thefrog]

Any one could share hashrate on 14.4 drivers and 280x cards?

Is it confirmed that with 14.6 drivers one can not change mem clock and so on?

I have 4.2 MHs on X11 with 14.6, and 3.1 on X13.
Linux, 2 gb ram.

And you can change memclock and so on?
Was that only a windows problem under 14.6?

yes, no problem at all.

I remember reading about some files you need to copy across for windows installation, was somewhere here in the thread.
Can't tell exactly, as no windows on my side, sorry.

[charmees]

is there difference on windows and smos? me and my friend have 14.6 drivers on machine and using r9 270.

he gets 2.8mh , but I get only 2mh

he told me his settings, but I tried to replicate it in my smos configuration, but got even less, now getting 1.9mh.

his setting and getting 2.8mh :

Code:

setx GPU_MAX_ALLOC_PERCENT 200 

setx GPU_USE_SYNC_OBJECTS 1 

COLOR 0A 

-I 19 -w 256 -g 2 --thread-concurrency 8192 --gpu-memclock 1500 --gpu-engine 1150

my settings in smos, getting 1.9mh:

Code:

"intensity" : "19",
"worksize" : "256",
"thread-concurrency" : "8192",
"gpu-thread" : "2",
"gpu-engine" : "1150",
"gpu-memclock" : "1500"

am I doing it correctly, how can I set that gpu max alloc etc? suggestions?

[windblow11]

This .inf only work for 14.6 RC1. AMD has taken it off their website but you can get it from Guru3d

Ok thanks for the update on that , I am running RC2 on one box and only 4GPU are active but the hash rates are isane :

geting 5.2 MHZ on a r290 clock speeds at 970 mem at 1350 intensity 21.

will my speeds drop with RC1 ? I wish there was an inf file for RC2 but i guess i will use the RC1 modded drivers for now since I need all 6 gpu's running

still no .inf files for 14.6 RC2 fot 5+ gpus

[fra55]

Using the latest version in home page, my hashrate dropped from 4.1 mh/s to 3.4 mh/s, same settings (tried with - I 18 and - I 19) but nothing changed...

[untalented]

I control gpu's with Trixx and Afterburner. With 14.4 I can lower clocks with 14.6 I can't, same sgminer and all the rest.

With 14.6 drivers you can't change settings on cards 280x/290X, but you can on HD7950/HD7970 and 290 cards.

BTW
Is Nist5 kernel missing in this miner?
Is missing in windows binares but i get from source and working well

[Chofoe]

Could someone provide x11 and x13 mode .cl files for windows? I have been trying to find those but none of them seemed to work with 14.6. I've managed to find out working x11mod, but still would need x13mod cl file. Thanks a lot!

Edit:
1st problem was in hamli.cl (windows link has old one)

Now I get this error when running sgminer with x13mod:

OCL....., line 289: error: vector
    "uchar8" has no field "m0", or illegal use of numeric/letter index, or num selected components != power of two PERM_BIG_P(g);

Advice needed.

Edit2:
Okay so you have to get all the .cl files from https://github.com/djm34/sph-sgminer_x11mod and modify x11 and x13 as mentioned in here https://bitcointalk.org/index.php?topic=658438.40

[mrbrdo]

I tried on a clean install of 32-bit ubuntu with latest (may23) 14.6 beta drivers, but I do not get any speed increase at all. I tried on x11mod both with djm34's version from github and latest sgminer v5.0.
A friend sent me pre-built .bin files from Windows and that works, I get 3.8 MH/s instead of 2.9 MH/s on my ASUS R9 280X. But if I build them myself on my Ubuntu, I get no speed increase (just normal 2.9 MH/s).
Any idea what I'm doing wrong? Does it have to be 64-bit?

[go6ooo1212]

Sorry if its written here , but could you help me how to run 5 or 6 R9 280X under win7 with 14.6 AMD drivers ?

[Reese212]

any words on r9 280x with 14.6 Drivers and x13 mining? i haven't installed the amd app sdk.

for me it went from 2.7 MH/s per GPU (13.12 Drivers) to 2.9 MH/s per GPU (14.6 Drivers)


what's your results?

[Reese212]

Sorry if its written here , but could you help me how to run 5 or 6 R9 280X under win7 with 14.6 AMD drivers ?

for 5 Cards with win7 you Need the modded *.inf files. otherwise your OS only detects 4 GPUs. and for the modded *.inf files to work you Need to enable the "Windows testmode" because These modded *.inf files aren't signed. Only signed Drivers work without enabling testmode. That's at least what i experienced...

[Reese212]

This .inf only work for 14.6 RC1. AMD has taken it off their website but you can get it from Guru3d

Ok thanks for the update on that , I am running RC2 on one box and only 4GPU are active but the hash rates are isane :

geting 5.2 MHZ on a r290 clock speeds at 970 mem at 1350 intensity 21.

will my speeds drop with RC1 ? I wish there was an inf file for RC2 but i guess i will use the RC1 modded drivers for now since I need all 6 gpu's running

still no .inf files for 14.6 RC2 fot 5+ gpus

the old *.inf files which i used with 13.12 Drivers work very well for me with the new amd-catalyst-14.6-rc2-windows-june23 Drivers...

[go6ooo1212]

Could you tell me which exact inf files should I replace
EDIT:
I succeed with 13.12 drvs , thanks for the support