[ANN] sgminer with X11/X13/Nist5/Quark/Anime kernels compatible 14.6 amd drivers

[Reese212]

Could you tell me which exact inf files should I replace

if you were able to had your 5+ GPUs running in one rig with win7 64bit then you must have used the modded inf files afaik.
i believe that this was the thread i got the modded *.inf files from: https://litecointalk.org/index.php?topic=11761.0

it says that it ONLY works wit 13.12, but i swear i just installed the 14.6rc2 Drivers, used the modded inf, and all GPUs get detected.

[1715231511]

1715231511

[1715231511]

1715231511

[go6ooo1212]

Could you tell me which exact inf files should I replace

if you were able to had your 5+ GPUs running in one rig with win7 64bit then you must have used the modded inf files afaik.
i believe that this was the thread i got the modded *.inf files from: https://litecointalk.org/index.php?topic=11761.0

it says that it ONLY works wit 13.12, but i swear i just installed the 14.6rc2 Drivers, used the modded inf, and all GPUs get detected.

Indeed , I Installed 14.6 RC2 , and one of the cards was with an error on the device manager. After that downloaded the 13.12 drvs from techpowerup , and just ipdated the damaged card with 13.12 ver of the driver and now its fixed , 5x280X GPUs on 4.277 MH /s on X11

[lixxy]

Could you tell me which exact inf files should I replace

if you were able to had your 5+ GPUs running in one rig with win7 64bit then you must have used the modded inf files afaik.
i believe that this was the thread i got the modded *.inf files from: https://litecointalk.org/index.php?topic=11761.0

it says that it ONLY works wit 13.12, but i swear i just installed the 14.6rc2 Drivers, used the modded inf, and all GPUs get detected.

Indeed , I Installed 14.6 RC2 , and one of the cards was with an error on the device manager. After that downloaded the 13.12 drvs from techpowerup , and just ipdated the damaged card with 13.12 ver of the driver and now its fixed , 5x280X GPUs on 4.277 MH /s on X11

wait... so which version of the miner are you using and what modifications in files did you have to do to it to be able to run x11? I finally got my rig to read 6 cards again after fiddling with it all day long trying to upgrade to the new djm34 miner... but it ended in not detecting all my cards.

wasted all day. now I finally detect all cards but hashrate is the same as before

[go6ooo1212]

You should Install 14.6 , I read a thread about 14.4 , anyway , then go to https://bitcointalk.org/index.php?topic=623409.0
here you'll find moded sgminer with 2 moded kernels for x11 and x13.

[huadaonan]

 why my temp and fan show  nothing. i have update the driver in 14.6rc2.my os is bamt1.3 .anyone who can help me,thanks

[huadaonan]

does your mining rig show the temp and fan speed?

The miner has been running on my test rig now for 2.5 hours.  It has one Gigabyte WF 270 non X and three Sapphire 270x cards.  The Gigabyte is undervolted to 1.075 volts and the 3 Sapphires are undervolted to 1.100 volts.  Engine clocks down just a bit to find stability.

Running BAMT 1.6.0 upgraded to the 14.6 beta drivers, using this procedure:

http://www.reddit.com/r/BAMT/comments/28xu3i/add_amd_146_drivers_and_djm34s_optimized_sgminer/

Config:

{
"pools" : [
   {
      "url" : "x",
      "user" : "x",
      "pass" : "x"
   }
],
"xintensity" : "512",
"kernel" : "x11mod",
"lookup-gap" : "2",
"shaders" : "1280",
"worksize" : "128",
"gpu-threads" : "2",
"gpu-engine" : "1050",
"gpu-fan" : "20-85",
"gpu-memclock" : "1250",
"gpu-powertune" : "20",

"temp-cutoff" : "92",
"temp-overheat" : "89",
"temp-target" : "75",

"api-listen": true,
"api-port": "4028",
"api-allow": "W:127.0.0.1",
"api-mcast-port" : "4028",
"auto-fan" : true,
"expiry" : "1",
"failover-only" : true,
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"temp-hysteresis" : "3",

"failover-switch-delay" : "30",
"no-pool-disable" : true,
"kernel-path" : "/usr/local/bin"
}


Each one hits 2.55 MH/s

[hashbrown9000]

yes temps and fan speeds are showing

[ShXnot]

do i still have to use 14.4 for hd 7950?
anyone here has a .bin file from 14.6 please?

[unlock.mk]

Hi,

I have released a version of sgminer which allows to mine X11 and X13 coins using 14.6 amd drivers.

Can you make sgminer or kernel that works with HD5XXX Amd cards at greater speed ?
Also it needs to mine X15

Tested your miner on my cards HD5xxx and frivers 14.6, and there is no improvement, moreover they are slower then on 13.12

[hashbrown9000]

sorry, no 7950s in my farm

[Bojcha]

Yea shame that 5xxxx/6xxx working so slow compared to newer series with x11.13.
However nist5 working just fine. Managed 6.5MH/s with 5850.

[Sinohe88]

Hello djm34,
i know it's so much to ask, but it would be great if you could tweak your miner to mine TWE algorithm
it's one of the rare good coins out there which is abandoned by the miners and i dont know why exactly
it has a strong network and some miners are still mining this coin
if you could find some free time, please take a look at this coin and this algorithm
thanks

[lobo13hf]

How can nist5 be cooler when my rigs gets hot as they did with X11?and my fan are louder now???

[GhostPlayer]

How can nist5 be cooler when my rigs gets hot as they did with X11?and my fan are louder now???

First time using nist5 with this baby on on my 5x 280x rig! It is much more optiimized it seem, than other miners? I dont know, first time trying out nist5, and haven't dug much into it.

 I get 4.15mh/s per BIOS undervolted 280x on x11
 I get 5.85mh/s on nist5

 Exact same settings. Does this look good, or should I try tweaking my configs all all?

[go6ooo1212]

with 280X you have to reach about 13 MH with modded talkcoin kernel...

[djm34]

How can nist5 be cooler when my rigs gets hot as they did with X11?and my fan are louder now???

First time using nist5 with this baby on on my 5x 280x rig! It is much more optiimized it seem, than other miners? I dont know, first time trying out nist5, and haven't dug much into it.

 I get 4.15mh/s per BIOS undervolted 280x on x11
 I get 5.85mh/s on nist5

 Exact same settings. Does this look good, or should I try tweaking my configs all all?

yes you should get a lot more than that

[novirudarzg]

guy how can i mine nist5 algo on linux bamt ... any good link ... coz i cant find.
i have bamt1.6.2
ty very much

[ikom]

Please can somebody share  NIST5 .bin created with AMD 14.6 drivers for 280x (nist5Tahitiglg....bin)?

Thx

[bensam123]

Not sure how you're supposed to use nist5 with this miner, the kernel isn't included... :l

Looking a bit closer, none of the algos mentioned in the opening post are included with this release. Was the upload file changed to something else?

[lobo13hf]

Please can somebody share  NIST5 .bin created with AMD 14.6 drivers for 280x (nist5Tahitiglg....bin)?

Thx

hereyou go

Code:

https://mega.co.nz/#!ohMVVQjZ!Jbhr82S1ZsXGBPx0PaoU632DlN-g3n0TemNbMRbpkIc

i get 13-13.50mh/s
i run 2 7970s and 1 280x on this rig hope it helps...