TheFridge
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2014, 11:04:39 PM |
|
I'm getting thousands of HW errors and 10% rejects. A reboot does nothing. How can I solve this problem?
what's your poolside difficulty? 4 (default) on btc guild and 256 on the antmimer
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8378
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2014, 11:05:11 PM Last edit: July 18, 2014, 11:17:20 PM by philipma1957 |
|
so quick numbers my evga 1300 is pulling about 665 watts at the plug to run 2 of these at standard clocks of 218.75 freq.
the fans are running 1800/1500 on the machine that gives me 447gh temps 37/39
the fans are running 1620/1320 on the machine that give me 440gh temps 39/39
room is 78f or 25.5 c
pretty quiet. not silent
665watt/887gh = .749 watts a hash. yet to use a plat psu and clock a little lower
I am running both machines at bitsolo.net they give me best share info. at btcguild.com no best share info.
bitsolo has me at number 7 with more then 600gh . needs time to show correctly.
height = 167 mm
width = 134 mm
length = 340 mm
fans = 120 mm the 140 mm quote from bitmaintech is a diagonal measurement of the fan grill's hole placement.
resellers beware do not advertise the fans as 140mm if you sell with a cc or paypal a nasty buyer would have a good chance of getting a refund over the fan size.
all in all right now the best gear available bar none.
|
|
|
|
contactlight
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2014, 11:31:58 PM |
|
My orders made it to Alaska. They are scheduled for delivery on Monday.
|
|
|
|
allcoinminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2014, 11:32:04 PM |
|
I'm getting thousands of HW errors and 10% rejects. A reboot does nothing. How can I solve this problem?
First contact bitmaintech. Second check for any x or - in ASIC status. Try removing the heatsink over ASICs and check for overuse/leak of thermal paste. Clean it and reseat the heatsinks, don't forget to use thermal paste or thermal pad. Hope you are running all at default, also post a screenshot of your status page.
|
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1023
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2014, 11:55:56 PM |
|
okay fast question How do I get the gui to show my best share? best share is zero/blank>
Both of mine show '0' Best Share as well ... no idea ... guess they might include it in a firmware update. Depends where you're hashing. GHash.io and BTCGuild don't show best share values in the status page. Eligius and p2pool do. Looks like bitsolo.net does as well. I'm getting thousands of HW errors and 10% rejects. A reboot does nothing. How can I solve this problem?
Put up a screenshot of your status page and your config page. Ant 1: 0.00028637079% HW errors at stock clocks getting 439GH/s on my local p2pool node Ant 2: 0.00043407425% HW errors at stock clocks getting 441GH/s on my local p2pool node
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
CryptoGuy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 18, 2014, 11:57:11 PM |
|
Coming from the Black Arrow failboat, this is a walk in the park. ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) I paid 7/6 so we'll see how long that takes.
|
<Insert favorite coin here>
|
|
|
as4uz
Newbie
Offline
Activity: 43
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 12:00:02 AM |
|
Do you know if it's possible to conect the S3 to a server power supply?If yes then how? (I'm talking about an IBM Bladecenter 39Y7352).It's kinda sad that they removed server support (they should have done it like AntMiner S1's).
Thank you!
|
|
|
|
sjc1490
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 12:09:18 AM |
|
Do you know if it's possible to conect the S3 to a server power supply?If yes then how? (I'm talking about an IBM Bladecenter 39Y7352).It's kinda sad that they removed server support (they should have done it like AntMiner S1's).
Thank you!
This is mine using a Dell 750w psu: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1278.photobucket.com%2Falbums%2Fy506%2Fsjc1490%2FS3New_zps9ec25f80.jpg&t=665&c=3J902_mAzAwddg)
|
BTC ADDRESS: 12Qwd8VKLQ4xF44ytHXBpCAKuF9VknG4X2
|
|
|
bcollan
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 69
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 12:10:29 AM |
|
Batch 1 not shipped yet... Pay DetailsPay 1.5 BTC Pay Confirm 1.5 BTC Date 2014-06-30 19:47:58 Send DetailsUnshipped Order DetailsProduct Total ANTMINER S3 × 2 1.5 BTC Sent BITMAIN an email yesterday: Bitmain,
My A3 batch 1 order has not yet shipped while others have received their orders today. Being that I ordered on 6-30 at 19:30:48 and paid the same 1.5 BTC as the others, I feel that some compensation is in order for those of us receiving their miners 5+ days later.
I understand that you are trying your best to ship orders out the door and I am grateful for all you have accomplished, but this S3 rollout is dangerously close to the failed "preorder" model you have been wise to ignore in the past.
Regards,
Bill Collan ID: bcollan
Their response: Hi, we're shipping out the units and you'll get the tracking number very soon. please wait for the tracking number in your account. thanks for your understanding and patience.
Best Regards
BITMAIN
No mention at all of comp. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif)
|
|
|
|
rograz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 12:15:41 AM |
|
No mention at all of comp. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) The initial shipping window was up until the 20th for b1, I wouldn't expect any compensation at all unless they miss that target, but since it's Bitmain you can at least hope!
|
|
|
|
sjc1490
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 12:17:57 AM |
|
Just out of curiosity did you check ups directly by tracking by reference(bitmain order number)? Mine was in ups a good day befor I got the email or it showed shipped on the bitmain site.
|
BTC ADDRESS: 12Qwd8VKLQ4xF44ytHXBpCAKuF9VknG4X2
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1023
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 12:20:30 AM |
|
Batch 1 not shipped yet... Pay DetailsPay 1.5 BTC Pay Confirm 1.5 BTC Date 2014-06-30 19:47:58 Send DetailsUnshipped Order DetailsProduct Total ANTMINER S3 × 2 1.5 BTC Sent BITMAIN an email yesterday: Bitmain,
My A3 batch 1 order has not yet shipped while others have received their orders today. Being that I ordered on 6-30 at 19:30:48 and paid the same 1.5 BTC as the others, I feel that some compensation is in order for those of us receiving their miners 5+ days later.
I understand that you are trying your best to ship orders out the door and I am grateful for all you have accomplished, but this S3 rollout is dangerously close to the failed "preorder" model you have been wise to ignore in the past.
Regards,
Bill Collan ID: bcollan
Their response: Hi, we're shipping out the units and you'll get the tracking number very soon. please wait for the tracking number in your account. thanks for your understanding and patience.
Best Regards
BITMAIN
No mention at all of comp. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Bitmain initially quoted shipping times of between the 10th and 20th. When they announced the change in specs, they adjusted that to say they hoped to start shipping batch 1 between the 14th and 17th. They're still within the original timeline, even though they had to make some adjustments before sending any out the door at all. I don't think you're going to get any further compensation, unless they don't ship until after the 20th, and then you can ask them for something. Disclosure: I created my order 2014-06-30 14:01:44 and received them yesterday. Bitmain didn't update my order status until 2014-07-16, even though the units had actually shipped on 2014-07-15 (China local, so really 2014-07-14 here).
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
kabopar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 12:30:30 AM |
|
Just out of curiosity did you check ups directly by tracking by reference(bitmain order number)? Mine was in ups a good day befor I got the email or it showed shipped on the bitmain site.
Tried to check on UPS using 'tracking by reference' with the Bitmain order number, but nothing is found. My B1 order was paid on: 2014-06-30 21:43. Cheers
|
|
|
|
halcy0n3
Newbie
Offline
Activity: 31
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 12:37:26 AM |
|
Tried to check on UPS using 'tracking by reference' with the Bitmain order number, but nothing is found. My B1 order was paid on: 2014-06-30 21:43.
Cheers
relax people. 2014-06-30 14:04:06.0 Shipped 2014-06-30 14:04:24.0 Unshipped Can you properly imagine how many orders were made in the opening minutes? I can tell you I had a hell of a time getting to place an order due to website bombardment. My first order managed to make it at 2014-06-30 14:03:16.0 and i can tell you I was trying at the opening bell (which was 14:00 UTC)
|
|
|
|
Pistachio
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 12:38:18 AM |
|
Ordered six the same day as you and still nothing in UPS my choice. If I am lucky, I'll receive them in a week. 7-10 days difference in mining should be worth something. We are getting dangerously close to Monday (07/21) shipping time. Does UPS even ship on a Saturday in China? Bitmain initially quoted shipping times of between the 10th and 20th. When they announced the change in specs, they adjusted that to say they hoped to start shipping batch 1 between the 14th and 17th. They're still within the original timeline, even though they had to make some adjustments before sending any out the door at all.
I don't think you're going to get any further compensation, unless they don't ship until after the 20th, and then you can ask them for something.
Disclosure: I created my order 2014-06-30 14:01:44 and received them yesterday. Bitmain didn't update my order status until 2014-07-16, even though the units had actually shipped on 2014-07-15 (China local, so really 2014-07-14 here).
|
|
|
|
rkinnin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 01:15:43 AM |
|
okay fast question How do I get the gui to show my best share? best share is zero/blank>
Both of mine show '0' Best Share as well ... no idea ... guess they might include it in a firmware update. Depends where you're hashing. GHash.io and BTCGuild don't show best share values in the status page. Eligius and p2pool do. Looks like bitsolo.net does as well. my s1's show their bestshare in their GUI's but the s2 doesn't. all are on gHash. Do I care that the bestshare isn't showing up? Thoughts?
|
|
|
|
TheFridge
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 01:30:57 AM |
|
okay fast question How do I get the gui to show my best share? best share is zero/blank>
Both of mine show '0' Best Share as well ... no idea ... guess they might include it in a firmware update. Depends where you're hashing. GHash.io and BTCGuild don't show best share values in the status page. Eligius and p2pool do. Looks like bitsolo.net does as well. I'm getting thousands of HW errors and 10% rejects. A reboot does nothing. How can I solve this problem?
Put up a screenshot of your status page and your config page. Ant 1: 0.00028637079% HW errors at stock clocks getting 439GH/s on my local p2pool node Ant 2: 0.00043407425% HW errors at stock clocks getting 441GH/s on my local p2pool node I'm using teamviwer from my phone so can't take a screenshot at the moment. Rebooted a couple of times and the hardware errors are around the 150 mark after half an hour. Also that bloody beeping won't stop even after turning it off in the menus
|
|
|
|
rkinnin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 01:47:20 AM |
|
Do you know if it's possible to conect the S3 to a server power supply?If yes then how? (I'm talking about an IBM Bladecenter 39Y7352).It's kinda sad that they removed server support (they should have done it like AntMiner S1's).
Thank you!
This is mine using a Dell 750w psu: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fi1278.photobucket.com%2Falbums%2Fy506%2Fsjc1490%2FS3New_zps9ec25f80.jpg&t=665&c=3J902_mAzAwddg) where do I find that PSU and cable set up? I would love to try it out.
|
|
|
|
googlemaster1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 01:55:11 AM |
|
okay fast question How do I get the gui to show my best share? best share is zero/blank>
Both of mine show '0' Best Share as well ... no idea ... guess they might include it in a firmware update. Depends where you're hashing. GHash.io and BTCGuild don't show best share values in the status page. Eligius and p2pool do. Looks like bitsolo.net does as well. my s1's show their bestshare in their GUI's but the s2 doesn't. all are on gHash. Do I care that the bestshare isn't showing up? Thoughts? You aren't supposed to admit that you mine on ghash. No one will help you then!
|
BTC: 15565dcUp4LEWe6KYT7tawMHFRL4cBbFGN
|
|
|
tripppn
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 19, 2014, 02:18:34 AM |
|
Do you know if it's possible to conect the S3 to a server power supply?If yes then how? (I'm talking about an IBM Bladecenter 39Y7352).It's kinda sad that they removed server support (they should have done it like AntMiner S1's).
Thank you!
This is mine using a Dell 750w psu: where do I find that PSU and cable set up? I would love to try it out. This is one place to get them http://minersource.net/products/dell-750w-psu-slash-adapter
|
“You can't be a real country unless you have a beer and an airline - it helps if you have some kind of football team, or some nuclear weapons, but in the very least you need a beer.” ― Frank Zappa
|
|
|
|