sepehr
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 399
Merit: 250
Cryptocurrency Evangelist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 06:43:16 AM |
|
Received my First order of 2xS3 Antminers today. They are seems very professional. Their weight was more than S1 Antminers. They both setup very smoothly with an Enermax 1000 PSU. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fs3_1.jpg&t=665&c=D_fVH4EgIU81og) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fs3_2.jpg&t=665&c=dZrIlNAUuCmtVA) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fs3_3.jpg&t=665&c=H8v2VEjfeiL2Lg) But the problem is that one card of one of S3's is not working at all! ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fscreenshot1.png&t=665&c=ihEyOGTn9c2cxw) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fscreenshot2.png&t=665&c=51TGXZW91doUkg) But the problem is that one card of one of S3's is not working at all! I have checked everything power, cabling, anything I can imagine but it persist and not working at all! Any ideas what should I do?
|
Sepehr, A Cryptocurrency Evangelist
|
|
|
Lowell904
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 119
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 06:52:12 AM |
|
Received my First order of 2xS3 Antminers today. They are seems very professional. Their weight was more than S1 Antminers. They both setup very smoothly with an Enermax 1000 PSU. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fs3_1.jpg&t=665&c=D_fVH4EgIU81og) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fs3_2.jpg&t=665&c=dZrIlNAUuCmtVA) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fs3_3.jpg&t=665&c=H8v2VEjfeiL2Lg) But the problem is that one card of one of S3's is not working at all! ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fscreenshot1.png&t=665&c=ihEyOGTn9c2cxw) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fforgeco.in%2Fimages%2Fs3%2Fscreenshot2.png&t=665&c=51TGXZW91doUkg) But the problem is that one card of one of S3's is not working at all! I have checked everything power, cabling, anything I can imagine but it persist and not working at all! Any ideas what should I do? Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping.
|
|
|
|
sepehr
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 399
Merit: 250
Cryptocurrency Evangelist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 06:55:50 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet!
|
Sepehr, A Cryptocurrency Evangelist
|
|
|
raspberrypirobot
Newbie
Offline
Activity: 14
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 07:49:21 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb.
|
|
|
|
sepehr
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 399
Merit: 250
Cryptocurrency Evangelist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 07:59:02 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb. there is no shipment problem seems on the device. But I found a clue. I connected control cable from main-board Socket-1 to Board 2 and from socket-2 to Board 1. Now the other board is mining and it's temperature increased. So it's obvious that there is some problem in mainboard and the Asic Boards and cables are ok.
|
Sepehr, A Cryptocurrency Evangelist
|
|
|
kabopar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 07:59:19 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! What happens if you connect the cables from your PSU that worked with the 'good' unit just to the 'bad' unit? (checking the possibility that there is some issue in your PSU or its cables) Cheers
|
|
|
|
kabopar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:01:15 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb. there is no shipment problem seems on the device. But I found a clue. I connected control cable from main-board Socket-1 to Board 2 and from socket-2 to Board 1. Now the other board is mining and it's temperature increased. So it's obvious that there is some problem in mainboard and the Asic Boards and cables are ok. Looks like its time to swap cables between your 'good' unit and the 'bad' one. Maybe its just a single faulty ribbon cable between the controller and the hashing boards. Cheers
|
|
|
|
sepehr
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 399
Merit: 250
Cryptocurrency Evangelist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:02:26 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! What happens if you connect the cables from your PSU that worked with the 'good' unit just to the 'bad' unit? (checking the possibility that there is some issue in your PSU or its cables) Cheers Did all these and no change! Thanks s lot for your attention
|
Sepehr, A Cryptocurrency Evangelist
|
|
|
sepehr
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 399
Merit: 250
Cryptocurrency Evangelist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:03:34 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb. there is no shipment problem seems on the device. But I found a clue. I connected control cable from main-board Socket-1 to Board 2 and from socket-2 to Board 1. Now the other board is mining and it's temperature increased. So it's obvious that there is some problem in mainboard and the Asic Boards and cables are ok. Looks like its time to swap cables between your 'good' unit and the 'bad' one. Maybe its just a single faulty ribbon cable between the controller and the hashing boards. Cheers ribbon cables are ok. tried this before.
|
Sepehr, A Cryptocurrency Evangelist
|
|
|
kabopar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:27:37 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb. there is no shipment problem seems on the device. But I found a clue. I connected control cable from main-board Socket-1 to Board 2 and from socket-2 to Board 1. Now the other board is mining and it's temperature increased. So it's obvious that there is some problem in mainboard and the Asic Boards and cables are ok. Looks like its time to swap cables between your 'good' unit and the 'bad' one. Maybe its just a single faulty ribbon cable between the controller and the hashing boards. Cheers ribbon cables are ok. tried this before. If it's not some obvious workmanship problem related to the main-board connector (dry solder joint on the socket to the 'bad' board), then it's probably an RMA issue with BITMAIN. If you want to prove this 'beyond doubt' you could swap controller boards between your 2 Antminers. Ideally they would provide the replacement main-board so that you can continue mining with the 'half' miner while the replacement is shipped to your rather than loosing the whole turn-around time. Cheers
|
|
|
|
sepehr
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 399
Merit: 250
Cryptocurrency Evangelist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:46:01 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb. there is no shipment problem seems on the device. But I found a clue. I connected control cable from main-board Socket-1 to Board 2 and from socket-2 to Board 1. Now the other board is mining and it's temperature increased. So it's obvious that there is some problem in mainboard and the Asic Boards and cables are ok. Looks like its time to swap cables between your 'good' unit and the 'bad' one. Maybe its just a single faulty ribbon cable between the controller and the hashing boards. Cheers ribbon cables are ok. tried this before. If it's not some obvious workmanship problem related to the main-board connector (dry solder joint on the socket to the 'bad' board), then it's probably an RMA issue with BITMAIN. If you want to prove this 'beyond doubt' you could swap controller boards between your 2 Antminers. Ideally they would provide the replacement main-board so that you can continue mining with the 'half' miner while the replacement is shipped to your rather than loosing the whole turn-around time. Cheers As you told I replaced the mainboard of bad device with main board of good device and now the device is working with two asic boards ok, so it's obvious that the main board of the bad device have some problem. I will ask bitmain for a replacement for mainboard and while then my device can mine half capacity. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Thanks a lot guys!
|
Sepehr, A Cryptocurrency Evangelist
|
|
|
BITMAIN (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 08:58:07 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb. there is no shipment problem seems on the device. But I found a clue. I connected control cable from main-board Socket-1 to Board 2 and from socket-2 to Board 1. Now the other board is mining and it's temperature increased. So it's obvious that there is some problem in mainboard and the Asic Boards and cables are ok. Looks like its time to swap cables between your 'good' unit and the 'bad' one. Maybe its just a single faulty ribbon cable between the controller and the hashing boards. Cheers ribbon cables are ok. tried this before. If it's not some obvious workmanship problem related to the main-board connector (dry solder joint on the socket to the 'bad' board), then it's probably an RMA issue with BITMAIN. If you want to prove this 'beyond doubt' you could swap controller boards between your 2 Antminers. Ideally they would provide the replacement main-board so that you can continue mining with the 'half' miner while the replacement is shipped to your rather than loosing the whole turn-around time. Cheers As you told I replaced the mainboard of bad device with main board of good device and now the device is working with two asic boards ok, so it's obvious that the main board of the bad device have some problem. I will ask bitmain for a replacement for mainboard and while then my device can mine half capacity. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Thanks a lot guys! Hi, RMA request is accepted, PMed you just now.
|
Cloud Mining? Just Go to Hashnest.com Best Liquidity Lowest Price 100% Real Mining Back Up
|
|
|
smilingloki
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 73
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 09:18:34 AM |
|
BITMAIN Order Shipped B2's • Order ID: 00XXXXXXXXXXXXXXXXXXXXXXXXXX • Date: 2014-07-03 10:25:13 Fantastic! as promised on or just after the 20th very happy!
|
|
|
|
sepehr
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 399
Merit: 250
Cryptocurrency Evangelist
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 09:25:19 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb. there is no shipment problem seems on the device. But I found a clue. I connected control cable from main-board Socket-1 to Board 2 and from socket-2 to Board 1. Now the other board is mining and it's temperature increased. So it's obvious that there is some problem in mainboard and the Asic Boards and cables are ok. Looks like its time to swap cables between your 'good' unit and the 'bad' one. Maybe its just a single faulty ribbon cable between the controller and the hashing boards. Cheers ribbon cables are ok. tried this before. If it's not some obvious workmanship problem related to the main-board connector (dry solder joint on the socket to the 'bad' board), then it's probably an RMA issue with BITMAIN. If you want to prove this 'beyond doubt' you could swap controller boards between your 2 Antminers. Ideally they would provide the replacement main-board so that you can continue mining with the 'half' miner while the replacement is shipped to your rather than loosing the whole turn-around time. Cheers As you told I replaced the mainboard of bad device with main board of good device and now the device is working with two asic boards ok, so it's obvious that the main board of the bad device have some problem. I will ask bitmain for a replacement for mainboard and while then my device can mine half capacity. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Thanks a lot guys! Hi, RMA request is accepted, PMed you just now. Thank you! you can send it with my other orders.
|
Sepehr, A Cryptocurrency Evangelist
|
|
|
Trammel
Newbie
Offline
Activity: 47
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 09:55:54 AM |
|
My batch 2 order is on its way.
Info from Bitmain Website
Order Placed Date: 2014-07-04 12:56:46
Payment Confirmed: Date 2014-07-04 14:07:48
Shipped: Date 2014-07-20 08:18:59
Hopefully will receive on Tuesday, and hope all arrives safely.
|
|
|
|
oskuro
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 09:56:25 AM |
|
Batch 2 Pay:1.48 BTC Confirm:1.48 BTC Paid Shipped Valid 2014-07-02 10:03:41.0 Yesssss!!!!!! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
oskuro
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 10:23:59 AM |
|
Why every newbie buy from bit main You will never roi Because diff go so up Because of bit main hardware So the only which is earn is bitmain no one else You never roi your money you spent
I take this as a hobbie and it will roi. Anyway what are you doing here if you hate bitmain?
|
|
|
|
kabopar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 10:34:36 AM |
|
But the problem is that one card of one of S3's is not working at all!
I have checked everything power, cabling, anything I can imagine but it persist and not working at all!
Any ideas what should I do?
Did you try moving the cables to the other ports? Otherwise, I would open it up and look for any loose connections. Sometimes things get knocked loose during shipping. Yes, tried it and open it up as well but found no problem yet! Checked the controller cable, changed it with the other one! But absolutely nothing happened yet! It happen during shipping with one of my S1, check for any loose capacitors or inductors on pcb. there is no shipment problem seems on the device. But I found a clue. I connected control cable from main-board Socket-1 to Board 2 and from socket-2 to Board 1. Now the other board is mining and it's temperature increased. So it's obvious that there is some problem in mainboard and the Asic Boards and cables are ok. Looks like its time to swap cables between your 'good' unit and the 'bad' one. Maybe its just a single faulty ribbon cable between the controller and the hashing boards. Cheers ribbon cables are ok. tried this before. If it's not some obvious workmanship problem related to the main-board connector (dry solder joint on the socket to the 'bad' board), then it's probably an RMA issue with BITMAIN. If you want to prove this 'beyond doubt' you could swap controller boards between your 2 Antminers. Ideally they would provide the replacement main-board so that you can continue mining with the 'half' miner while the replacement is shipped to your rather than loosing the whole turn-around time. Cheers As you told I replaced the mainboard of bad device with main board of good device and now the device is working with two asic boards ok, so it's obvious that the main board of the bad device have some problem. I will ask bitmain for a replacement for mainboard and while then my device can mine half capacity. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Thanks a lot guys! Hi, RMA request is accepted, PMed you just now. Thank you! you can send it with my other orders. Looks like the script for a 'happy end' ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Congrats!
|
|
|
|
kabopar
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 10:36:41 AM |
|
Batch 2 Pay:1.48 BTC Confirm:1.48 BTC Paid Shipped Valid 2014-07-02 10:03:41.0 Yesssss!!!!!! ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Congrats! Wish you a quick delivery I also got the delivery info and am following the tracking, unfortunately the weekend seems to put a bit of a pause, so current delivery of my B1 order is now expected on Wednesday. Cheers
|
|
|
|
JennaK
Newbie
Offline
Activity: 42
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 20, 2014, 10:37:54 AM |
|
I get Free electricity at my dorm! I wish I could buy one so I could mine. Would be fun! Enjoy your ant miners guys.
|
|
|
|
|