patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 29, 2018, 08:54:18 AM |
|
After stopping mining, the gminer continues to work. This problem is present if Hide Window is set in the settings of the Environment. Please fix the bug Thank.
I use gminer and I've only encountered problems with RTX. I have one of the rigs with 1070 and 1060, and the error you indicate does not happen to me. If there is still a problem, it is not from Awesome miner, it is from the miner himself and we will have to wait for an update. Do not blame this program for the faults of a specific miner. This problem is in an awesome miner. The problem is when the miner window is hidden. When the miner window is visible, everything works correctly. Awesome miner does not give a command or does not give the correct command to turn off Gminer. I wasn't able to reproduce this, but it could be some timing thing related to when Awesome Miner terminates the Gminer process and the built-in watchdog in Gminer. Could you please start Gminer with the watchdog disabled to see if you run into the same problem. You can add the command line: -w 0 Please let me know the result - thanks!
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 29, 2018, 09:24:23 AM |
|
Is there a way to use Rules to be notified when a Pool Group reaches a profit value?
It should be possible if you create a Profit Profile that only uses this Pool Group. You can then create a rule simliar to "Example: Start mining when profitability is above a defined value": https://support.awesomeminer.com/support/solutions/articles/35000085907-rules-detect-mining-issues-and-automate-tasksIn this example, the action is to start the mining. You can change this to use the Notification action instead.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 29, 2018, 09:27:03 AM |
|
Sorry, problem solved: - New setting to force CUDA device order to follow the GPU PCI Bus ID. In case of mixed nVidia GPU models in the same system, this can resolve issues to the GPU selection order. Thank you, all that is written below is no longer relevant.
Thanks for the update. The new feature to use force the CUDA mining software to use PCI Bus ID order is actually the best setup to have. The reason why I've not made it default yet is that it may change the device order that users already have configured, and then a new release of Awesome Miner would all of a sudden would instruct the mining software to mine on other GPU's than before.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
baf28
Newbie
Offline
Activity: 117
Merit: 0
|
|
November 29, 2018, 09:29:37 AM |
|
After stopping mining, the gminer continues to work. This problem is present if Hide Window is set in the settings of the Environment. Please fix the bug Thank.
I use gminer and I've only encountered problems with RTX. I have one of the rigs with 1070 and 1060, and the error you indicate does not happen to me. If there is still a problem, it is not from Awesome miner, it is from the miner himself and we will have to wait for an update. Do not blame this program for the faults of a specific miner. This problem is in an awesome miner. The problem is when the miner window is hidden. When the miner window is visible, everything works correctly. Awesome miner does not give a command or does not give the correct command to turn off Gminer. I wasn't able to reproduce this, but it could be some timing thing related to when Awesome Miner terminates the Gminer process and the built-in watchdog in Gminer. Could you please start Gminer with the watchdog disabled to see if you run into the same problem. You can add the command line: -w 0 Please let me know the result - thanks! Yes, this option turns off the miner, Gminer turns off.
|
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 29, 2018, 09:41:01 AM |
|
Awesome Miner version 6.0.1
Mining software - Gminer Cuda Miner 1.09 Corrections - Correction to an issue where Awesome Miner didn't start correctly on some systems
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
baf28
Newbie
Offline
Activity: 117
Merit: 0
|
|
November 29, 2018, 10:43:26 AM |
|
Awesome Miner version 6.0.1
Mining software - Gminer Cuda Miner 1.09 Corrections - Correction to an issue where Awesome Miner didn't start correctly on some systems
thank Version 6.0-6.0.1 is a great and very good update. Thank.
|
|
|
|
Allo-4ka
Newbie
Offline
Activity: 71
Merit: 0
|
|
November 29, 2018, 11:09:12 AM |
|
Are there only a few specific coins that are incorrect on Coincalculators? Any example? At first there was a MAZA coin and then BCHSV. There were a few more, but I don’t remember
|
|
|
|
mmartoccia
Newbie
Offline
Activity: 47
Merit: 0
|
|
November 29, 2018, 03:23:38 PM |
|
Appreciate the response! If I have more than one Profit Profile, how does the rule evaluate which of the two is at or above value?
|
|
|
|
jaye1701
Newbie
Offline
Activity: 5
Merit: 0
|
|
November 29, 2018, 05:46:03 PM |
|
Hello everyone!!
I updated about 20 minutes ago, and since there was a miner update (Gminer) I benchmarked like I always do.
This time however the benchmark failed. The miner would not start. I tried EWBF and it worked fine. I then tried to mine BTG from miningpoolhub with both to make sure the pool was ok. Again, Gminer did the quick flash and fail. I can't see what I am doing wrong. Anyone have any clue? Here is the diagnostic.
Initialize diagnostics (20) Starting Diagnostics. Awesome Miner version: 6.0.1 OS: Microsoft Windows 10 Pro 64-bit nVidia driver version: 416.34 Microsoft VC++ 2013 runtime installed: Yes Microsoft VC++ 2015 runtime installed: Yes Starting Mining Software Setting up Miner Engine. Instance: 1 Engine Type: GMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: Properties: (WindowMode: ConsoleFormat, EngineType: GMiner, IsProfitMiner: False) ==================================================================================================== C:\Users\Jaye\AppData\Local\AwesomeMiner\gminer_1_09_windows64_1\miner.exe -a 144_5 -s us-east.equihash-hub.miningpoolhub.com -n 20595 -u blahblah.blah -p x --api 4028 ==================================================================================================== > personalization string not specified Failed to start miner process: Process has exited, so the requested information is not available. Failed to start miner in Diagnostics mode Diagnostics completed
|
|
|
|
trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
November 30, 2018, 01:41:10 AM |
|
GMiner v1.10 available for download v1.10 + fixed performance regression on Equihash 144,5/Equihash 192,7 under Windows Download links: Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A New gminer 1.10 with improvements, you can provide me with a correct url to add it as custom, until you update again. Thanks in advance
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
November 30, 2018, 08:38:28 AM |
|
Hey Patrik, please add a Tab for Properties>Command Line>Parameters in the main miner window where you have Summary, Pools, GPU, Etc when you click on each miner. That is probably the absolutely most tweaked and hardest to get to element in the UI right now. That's extremely useful for adjusting, testing new configs, troubleshooting.
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 30, 2018, 01:58:33 PM |
|
Appreciate the response! If I have more than one Profit Profile, how does the rule evaluate which of the two is at or above value? OK - now I see the difficulty here. The trigger for "Revenue and profit" is considering all miners that you have enabled for the rule (either all miners or specific miners you apply the rule for). If you configure the rule to look at the Profit Profile, it will look at the Profit Profile for each of the miners enabled for the rule. So you do need to have one miner using this Profit Profile for the concept to work. Based on your description, this may not be the case and you simply want to get notifications without having any miners using the Profit Profile already. Is that correct? This trigger would then need to be improved to allow you to set a specific Profit Profile, not related to any of the profiles for the miners.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 30, 2018, 02:00:31 PM |
|
Hello everyone!!
I updated about 20 minutes ago, and since there was a miner update (Gminer) I benchmarked like I always do.
This time however the benchmark failed. The miner would not start. I tried EWBF and it worked fine. I then tried to mine BTG from miningpoolhub with both to make sure the pool was ok. Again, Gminer did the quick flash and fail. I can't see what I am doing wrong. Anyone have any clue? Here is the diagnostic.
Initialize diagnostics (20) Starting Diagnostics. Awesome Miner version: 6.0.1 OS: Microsoft Windows 10 Pro 64-bit nVidia driver version: 416.34 Microsoft VC++ 2013 runtime installed: Yes Microsoft VC++ 2015 runtime installed: Yes Starting Mining Software Setting up Miner Engine. Instance: 1 Engine Type: GMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: Properties: (WindowMode: ConsoleFormat, EngineType: GMiner, IsProfitMiner: False) ==================================================================================================== C:\Users\Jaye\AppData\Local\AwesomeMiner\gminer_1_09_windows64_1\miner.exe -a 144_5 -s us-east.equihash-hub.miningpoolhub.com -n 20595 -u blahblah.blah -p x --api 4028 ==================================================================================================== > personalization string not specified Failed to start miner process: Process has exited, so the requested information is not available. Failed to start miner in Diagnostics mode Diagnostics completed
The issue is related to the missing personalization string. Did you manually add this pool in Awesome Miner, or was is a re-use of one of the predefined pools? If you added this pool yourself, please open the properties of the pool and fill in the Personalization field: BgoldPoW
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 30, 2018, 02:01:17 PM |
|
GMiner v1.10 available for download v1.10 + fixed performance regression on Equihash 144,5/Equihash 192,7 under Windows Download links: Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A New gminer 1.10 with improvements, you can provide me with a correct url to add it as custom, until you update again. Thanks in advance The next release of Awesome Miner will use this link for v1.10: https://s3.amazonaws.com/awesomeminer-download/gminer_1_10_windows64.zip
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
November 30, 2018, 02:13:10 PM |
|
Hey Patrik, please add a Tab for Properties>Command Line>Parameters in the main miner window where you have Summary, Pools, GPU, Etc when you click on each miner. That is probably the absolutely most tweaked and hardest to get to element in the UI right now. That's extremely useful for adjusting, testing new configs, troubleshooting.
Hello again and thanks for your feedback! I agree with your point here so I will see if there is a good way of making it easier to access this setting via the tabs while still not making it look too odd to have a specific setting outside the Properties. There is also another feature that you might find helpful when testing different settings. In the Benchmark dialog for a miner, you can click on the drop down arrow next to the Start button to run a benchmark with specific command line parameters. This is intended to be a way where you try different command lines and see the result. What you enter here is however not saved to the Properties of the miner, but it for some testing scenarios it might still be of help.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
bensam1231
Legendary
Offline
Activity: 1750
Merit: 1024
|
|
November 30, 2018, 03:37:44 PM |
|
Hey Patrik, please add a Tab for Properties>Command Line>Parameters in the main miner window where you have Summary, Pools, GPU, Etc when you click on each miner. That is probably the absolutely most tweaked and hardest to get to element in the UI right now. That's extremely useful for adjusting, testing new configs, troubleshooting.
Hello again and thanks for your feedback! I agree with your point here so I will see if there is a good way of making it easier to access this setting via the tabs while still not making it look too odd to have a specific setting outside the Properties. There is also another feature that you might find helpful when testing different settings. In the Benchmark dialog for a miner, you can click on the drop down arrow next to the Start button to run a benchmark with specific command line parameters. This is intended to be a way where you try different command lines and see the result. What you enter here is however not saved to the Properties of the miner, but it for some testing scenarios it might still be of help. Alright, yeah it is kinda out of place, but very useful for testing things. I'll check out the other option. I've never used the benchmark dialogue. Can a c# script in rules be used to monitor a text file and look for a specific value such as a date and time?
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
leoncryp
Newbie
Offline
Activity: 13
Merit: 0
|
|
November 30, 2018, 05:34:49 PM |
|
Hey man can you add ubqminer 0.17.0-alpha.1 https://github.com/ubiq/ubqminer/releasesubiq forked an neither CM,ethminer, bminer or phoenixminer works now. ethminer 0.17.0-alpha.1 doesn't work . I got the ubqminer working with the upload tool under ethminer my settings if it helps --work-timeout 880 --cl-local-work 64 -G ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I put that in the command line then i let awesome do the rest . I'm sure your a ware of it, just making it easy for others that mine ubiqcoins Are you using Awesome miner with ubqminer as standalone? or have you got it doing auto profit switching? I cant seem to get it working with auto profit switching, Ive added the coin, miner profile, pool setup but auto profit switch working
|
|
|
|
trucobit
Jr. Member
Offline
Activity: 756
Merit: 2
|
|
November 30, 2018, 06:10:37 PM |
|
Thanks patrike. Inform everyone that version 1.10 returns to give the hash that was in 1.08 that was lost in 1.09. So it is recommended that you know how to add it as custom.
|
|
|
|
mmartoccia
Newbie
Offline
Activity: 47
Merit: 0
|
|
November 30, 2018, 06:13:34 PM |
|
Appreciate the response! If I have more than one Profit Profile, how does the rule evaluate which of the two is at or above value? OK - now I see the difficulty here. The trigger for "Revenue and profit" is considering all miners that you have enabled for the rule (either all miners or specific miners you apply the rule for). If you configure the rule to look at the Profit Profile, it will look at the Profit Profile for each of the miners enabled for the rule. So you do need to have one miner using this Profit Profile for the concept to work. Based on your description, this may not be the case and you simply want to get notifications without having any miners using the Profit Profile already. Is that correct? This trigger would then need to be improved to allow you to set a specific Profit Profile, not related to any of the profiles for the miners. Yes, you got it and that would be ideal! If a Profit Profile, Profile Group or even an Algorithm class in Coins (based on profit) could be leveraged for a trigger without an association to a miner this would give me what I'm looking for. Thank you for digging in.
|
|
|
|
baf28
Newbie
Offline
Activity: 117
Merit: 0
|
|
December 01, 2018, 11:03:22 AM |
|
Please tell me which API BCD has to check the balance? Thank.
|
|
|
|
|