Pictures of your mining rigs!

[Pimbox]

[1714195615]

1714195615

[1714195615]

1714195615

[1714195615]

1714195615

[1714195615]

1714195615

[Mitchell]

Damn Pimbox, I do not envy your electricity network. Must be under a lot of stress when you connect three mining computers to 1 outlet.
But it does look impressive.

[dell123]

I really have to post my rigs before I sell some of them, it's quite the pretty sight!!  I will miss it but onwards and upwards, sure it will serve someone else just as well as it has me.

[terrapinflyer]

https://www.dropbox.com/s/j053l3n2bakky4i/2013-08-27%2011.46.52.jpg

running cgminer 3.1.1 at 3.357gh/s waiting on my hew hub to add 6 more chips. I was wondering if anyone had any experience with this hub http://www.amazon.com/gp/product/B004F38WT4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3K929QT0IENFR and the pi. I would like to run more chips on this rig. I was thinking topping out around 12gh/s.

[molecular]

this totally blew my mind ("why is the ceiling only like 1 meter high? Is this inside some ventilation duct? why is everthing screwed to ceiling and walls? This guy is insane!") until I figured out the pic is rotated 90°.

[Mitchell]

running cgminer 3.1.1 at 3.357gh/s waiting on my hew hub to add 6 more chips. I was wondering if anyone had any experience with this hub http://www.amazon.com/gp/product/B004F38WT4/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A3K929QT0IENFR and the pi. I would like to run more chips on this rig. I was thinking topping out around 12gh/s.

Damn, looks cool!

[networkgeek24]

this totally blew my mind ("why is the ceiling only like 1 meter high? Is this inside some ventilation duct? why is everthing screwed to ceiling and walls? This guy is insane!") until I figured out the pic is rotated 90°.

So funny, I had the exact same thought for a split second.

[Pimbox]

this totally blew my mind ("why is the ceiling only like 1 meter high? Is this inside some ventilation duct? why is everthing screwed to ceiling and walls? This guy is insane!") until I figured out the pic is rotated 90°.

Is outside of my house.... have grids on top , both ends sides. Strong wind 24 hours per day... enter cool air and gone hot air.

[Beaflag VonRathburg]

http://thunderhost.com.br/adrenaline/cm1.jpg

this totally blew my mind ("why is the ceiling only like 1 meter high? Is this inside some ventilation duct? why is everthing screwed to ceiling and walls? This guy is insane!") until I figured out the pic is rotated 90°.

So funny, I had the exact same thought for a split second.

x3, I was really confused as well. Please, next time... right click + rotate image before hosting.

What is the total specs on all of that and why so many cases? I counted 24 of them, but it is hard to tell from the images angles. Even if you spent $20 (seems to be a gross underestimate) on each one that's a lot of money.

[BTC-engineer]

Setup based on 64GH/s BFL SINGLE-SC's.

[sr_miner]

Setup based on 64GH/s BFL SINGLE-SC's.

https://lh6.googleusercontent.com/-PruFne6ZGBw/UhpA4Z-qf7I/AAAAAAAABgU/U6jzXB1heck/s800/SAM_2315.JPG

wow, I'm jealous... 

[notme]

I do some dodgy stuff, but that just looks a fire hazard.

I have taken some cost effective precautions to avoid a fire.  I filled a milk jug with used cooking oil, and it rests just on top of the box.  If the heat causes the box to ignite, it will melt the bottom of the platic jug and extinguish the flames in a non-conductive coating of fry oil.

Because this cooking oil is used, it provides a few benefits.  1) It is nice for the environment.  2) It's free materials.  3) Even though your mining rig is on fire, you can't deny how much it smells like french fries (and that's a great smell).

The only problem I can see here is the false positive that a smoke alarm would play, so I have disabled that to prevent any unnecessary panic.

The plastic will not melt until the oil heats up to close to the melting point of the plastic.  Don't believe me?  Try this: put water in a paper cup and hold a lighter to the bottom.  It may blacken a little, but it won't burn.  You can also put water in a plastic bottle and put it in a campfire.  If you leave the lid off the water will have to boil off before it will melt.  (If you leave the lid on, congratulations you have made a steam bomb... run unless you like hot coals flying at you.)  If there is enough cardboard to heat up the oil, when the plastic does melt the oil will easily ignite, making your problem much worse.

If you're trolling, good work.  If not, please take the jug off your rig.

[Hippie Tech]

I do some dodgy stuff, but that just looks a fire hazard.

I have taken some cost effective precautions to avoid a fire.  I filled a milk jug with used cooking oil, and it rests just on top of the box.  If the heat causes the box to ignite, it will melt the bottom of the platic jug and extinguish the flames in a non-conductive coating of fry oil.

Because this cooking oil is used, it provides a few benefits.  1) It is nice for the environment.  2) It's free materials.  3) Even though your mining rig is on fire, you can't deny how much it smells like french fries (and that's a great smell).

The only problem I can see here is the false positive that a smoke alarm would play, so I have disabled that to prevent any unnecessary panic.

The plastic will not melt until the oil heats up to close to the melting point of the plastic.  Don't believe me?  Try this: put water in a paper cup and hold a lighter to the bottom.  It may blacken a little, but it won't burn.  You can also put water in a plastic bottle and put it in a campfire.  If you leave the lid off the water will have to boil off before it will melt.  (If you leave the lid on, congratulations you have made a steam bomb... run unless you like hot coals flying at you.)  If there is enough cardboard to heat up the oil, when the plastic does melt the oil will easily ignite, making your problem much worse.

If you're trolling, good work.  If not, please take the jug off your rig.

+1

Where is Captain Hindsight when you need him !? 

[oddree]

If you're trolling, good work.  If not, please take the jug off your rig.

I BE TROLLIN!

https://i.chzbgr.com/maxW500/4818964736/hD3346244/

I was kind of tempted to dump my used fry oil into a jug and take a new picture.  But I have let this go on long enough.  :-)

[notme]

If you're trolling, good work.  If not, please take the jug off your rig.

I BE TROLLIN!



I was kind of tempted to dump my used fry oil into a jug and take a new picture.  But I have let this go on long enough.  :-)

Good.  I hate to assume someone could be that foolish, but I've been let down too often to give the benefit of the doubt in potentially dangerous situations.

[kidtriton]

I call this the hash cart.  I've got three more BEs and another small Anker coming and then I'll probably move all of it into the larger enclosure that I made in the last picture, with a set of fans closing in each end.



http://farm3.staticflickr.com/2836/9628463363_ec6827763a_b.jpg


http://farm4.staticflickr.com/3690/9631703626_9730a577df_b.jpg


http://farm3.staticflickr.com/2861/9631707506_ba53ba6abe_b.jpg


http://farm4.staticflickr.com/3734/9631710520_f7896cf95f_b.jpg


http://farm8.staticflickr.com/7455/9628485173_b5c7181227_b.jpg


http://farm4.staticflickr.com/3803/9631716612_805f546ef1_b.jpg

[Magazine]

I want a Hash Cart.

[ASIC-K]

Just some random images of my setup

50btc team canada! join up!

[Magazine]

Just some random images of my setup

50btc team canada! join up!

I don't see any pictures.

[ASIC-K]

sorry had to redo them