[Ultracoin] [Est. Feb 2014] ~ ASIC Resistant & Ultrafast 6 Second Transactions!

[funsponge]

with the new wallet when i remove everything in %appdata%\roaming\ultracoin apart from the wallet.dat my coins balance drops to 34utc when it should be 170000utc?
When i revert back to my old wallet my coins show up but it wont sync as it gets stuck on blockchain 855838.

When i try just to install the new wallet without removing %appdata%\roaming\ultracoin it  just gets stuck on the new Ultracoin logo splash-screen. After an hour I stopped the process and presumed it had crashed.

Not slept all night trying to resolve this. Any ideas?

[BorisWCR]

Maybe a good idea everybody checks and looks good at the new wallet after the download and send a message out here to Kracko so he now's about it and can fixed it.

@Kracko: 

if I start the new wallet then the new Ultracoin logo splash-screen appears on the desktop, but it takes more then 8 or 10 minutes before the logo splash screen disappears and the wallet opens.
This was also the problem with one of the older wallets in the past, please look in to that Kracko...

[Valpe]

with the new wallet when i remove everything in %appdata%\roaming\ultracoin apart from the wallet.dat my coins balance drops to 34utc when it should be 170000utc?
When i revert back to my old wallet my coins show up but it wont sync as it gets stuck on blockchain 855838.

When i try just to install the new wallet without removing %appdata%\roaming\ultracoin it  just gets stuck on the new Ultracoin logo splash-screen. After an hour I stopped the process and presumed it had crashed.

Not slept all night trying to resolve this. Any ideas?

when you removed:
did you wait that all blocks was updated? All coins wont show up until all is update. That happened for me and all is now showing up.

[funsponge]

with the new wallet when i remove everything in %appdata%\roaming\ultracoin apart from the wallet.dat my coins balance drops to 34utc when it should be 170000utc?
When i revert back to my old wallet my coins show up but it wont sync as it gets stuck on blockchain 855838.

When i try just to install the new wallet without removing %appdata%\roaming\ultracoin it  just gets stuck on the new Ultracoin logo splash-screen. After an hour I stopped the process and presumed it had crashed.

Not slept all night trying to resolve this. Any ideas?

when you removed:
did you wait that all blocks was updated? All coins wont show up until all is update. That happened for me and all is now showing up.

its been downloading the blockchain all night - at 68% currently - i hope so - will inform you all the outcome

[dan_and_shan]

with the new wallet when i remove everything in %appdata%\roaming\ultracoin apart from the wallet.dat my coins balance drops to 34utc when it should be 170000utc?
When i revert back to my old wallet my coins show up but it wont sync as it gets stuck on blockchain 855838.

When i try just to install the new wallet without removing %appdata%\roaming\ultracoin it  just gets stuck on the new Ultracoin logo splash-screen. After an hour I stopped the process and presumed it had crashed.

Not slept all night trying to resolve this. Any ideas?

I had the same thing splash screen stuck, but left it and went to bed in the morning was all up to speed and no problems

[king_pin]

-o stratum+tcp://stratum2.tumblingblock.com:5555
-o stratum+tcp://stratum2.tumblingblock.com:64445
 Work with YACminer perfectly!!!

And even port 64444 is working with Yacminer!

Cuda is woking too!

About peoples wallet problems!
1. Wallet tends to be CPU intensive, so a slow start is normal, on my 8 core AMD it loads for less then a min, and same goesf for a 6 core AMD!
2. It is also normal to display less coins than you had, even 0 coins, but once it is synched everything will be fine!

[primouno]

Maybe a good idea everybody checks and looks good at the new wallet after the download and send a message out here to Kracko so he now's about it and can fixed it.

@Kracko:  

if I start the new wallet then the new Ultracoin logo splash-screen appears on the desktop, but it takes more then 8 or 10 minutes before the logo splash screen disappears and the wallet opens.
This was also the problem with one of the older wallets in the past, please look in to that Kracko...

This shouldn't take so long. I had this problem before the last update, but now with the new wallet it takes less than a minute.

Is it normal that staked coins not showing up?

[king_pin]

I installed the wallet on 12PCs and staked 100-200 coins on each one.
I suggest we all do the same.

If I understand right, the more NEW nodes staking, the better the chances for the network to stabilize., am I right Kracko

[Valpe]

Maybe a good idea everybody checks and looks good at the new wallet after the download and send a message out here to Kracko so he now's about it and can fixed it.

@Kracko:  

if I start the new wallet then the new Ultracoin logo splash-screen appears on the desktop, but it takes more then 8 or 10 minutes before the logo splash screen disappears and the wallet opens.
This was also the problem with one of the older wallets in the past, please look in to that Kracko...

This shouldn't take so long. I had this problem before the last update, but now with the new wallet it takes less than a minute.

Is it normal that staked coins not showing up?

With new wallet staked coins is showing up. I have lots of staked orphans after problems started.

Now wallet is ok and staked coin are showed up. I can see stake value and transactions value.

[primouno]

Oh that's right they are showing up but in the box "Last transactions" (right column of the wallet) I have only older ones. It seems like it's not refreshing, but staked coins are added to my wallet.

Edit:
I cleared orphans and now it's OK

[Kracko]

with the new wallet when i remove everything in %appdata%\roaming\ultracoin apart from the wallet.dat my coins balance drops to 34utc when it should be 170000utc?
When i revert back to my old wallet my coins show up but it wont sync as it gets stuck on blockchain 855838.

When i try just to install the new wallet without removing %appdata%\roaming\ultracoin it  just gets stuck on the new Ultracoin logo splash-screen. After an hour I stopped the process and presumed it had crashed.

Not slept all night trying to resolve this. Any ideas?

when you removed:
did you wait that all blocks was updated? All coins wont show up until all is update. That happened for me and all is now showing up.

its been downloading the blockchain all night - at 68% currently - i hope so - will inform you all the outcome

Your wallet will be fine.  Your money will show up.  The new version uses the same BDB version wallet.dat files as the previous.

It is much faster and doesn't tax the network if you are patient and let it read the blocks directly from the blockchain file on the hard disk.  Unfortunately the mechanism that does this does not report anywhere.  Once you start it up and the splash screen shows it will appear to have hung but it is converting your block data to the new format.  If you look at the file sizes in your AppData\Roaming\UltraCoin folder in your profile you can the new v2 files growing.  If you have a slow PC it could take several hours.  I heard someone report that theirs took 5 hours.  It will be almost done once the size of the new blk-v2-0001.dat file is around the same as the blk-v1-0001.dat file.  In the future I may set up the conversion process so that it doesn't block IO and either adds a progress window or sets a conversion state using the existing window.

[Kracko]

Oh that's right they are showing up but in the box "Last transactions" (right column of the wallet) I have only older ones. It seems like it's not refreshing, but staked coins are added to my wallet.

Edit:
I cleared orphans and now it's OK

Yes, I added that feature for that very reason.  I had the same problem with my wallet.  I was annoyed by those transactions that always stayed at the top of the list with 0 confirms and that never changed.   I haven't seen any new orphans appear since I cleared the ones in my wallet.  And now the transactions appear as they should.

To use this feature, go to the transactions tab of the wallet, right click on the transactions and select the "Clear orphans" menu item from the pop-up context menu.

[king_pin]

So the only thing left is:

WTF is going on with the difficulty???

[Valpe]

So the only thing left is:

WTF is going on with the difficulty???

Valid question but could you ask one time nicely?

I think as dev team is allready sayed... we need one update more..and its underway. This is the reason why we need as much hash power than we can get to TESTNET POOL. New update need to work fully and fix problems.

[wtfc360]

Is it possible to enable stake minting AND mining in the wallet at the same time? If so what settings to use in the mining options?
Is it possible to mine in the wallet on the same computer/motherboard you use with GPUmining (5GPUs)?

Did I understand it right that there will be another hard fork and a new wallet update soon/tonight?

[BorisWCR]

Is it possible to enable stake minting AND mining in the wallet at the same time? If so what settings to use in the mining options?
Is it possible to mine in the wallet on the same computer/motherboard you use with GPUmining (5GPUs)?

Did I understand it right that there will be another hard fork and a new wallet update soon/tonight?

.....And if yes, if their will be a new hard fork, do we then have to download the blockchain again from the start ?

[wtfc360]

I installed the wallet on 12PCs and staked 100-200 coins on each one.
I suggest we all do the same.

If I understand right, the more NEW nodes staking, the better the chances for the network to stabilize., am I right Kracko

Did you use the same wallet.dat in each and every one of the 12 computers with all your UTC on, or did you install new wallets on every one with 0 UTC on? Thought you needed UTC in the wallet to be able to stake mint them?

[king_pin]

So the only thing left is:

WTF is going on with the difficulty???

Valid question but could you ask one time nicely?

I think as dev team is allready sayed... we need one update more..and its underway. This is the reason why we need as much hash power than we can get to TESTNET POOL. New update need to work fully and fix problems.

NOPE!
I'm just a bad ass mother fu**er, I eat devs for breakfast!

Last week I hospitalized a brick!
I am so mean I make medicine sick!!!


@wtfc360
Yes you can, but better mine at the pool.
And Nope, I installed new wallets, and spread some coins, but I had 3 old wallets all updated perfectly, amounts and everything!

@BorisWCR
Yes you have to.

[Kracko]

I tried to sign up for the test pool.  I am not receiving the verification email though so unable to login to create workers etc.

Sign up at utc2.tumblingblock.com.  The test pool's configuration has been wiped frequently, so it uses the user accounts from the utc2 database.  You can use your existing utc2 account, if you have one, to login to the test pool.   You will have to create your workers though.

[Valpe]

So the only thing left is:

WTF is going on with the difficulty???

Valid question but could you ask one time nicely?

I think as dev team is allready sayed... we need one update more..and its underway. This is the reason why we need as much hash power than we can get to TESTNET POOL. New update need to work fully and fix problems.

NOPE!
I'm just a bad ass mother fu**er, I eat devs for breakfast!

Last week I hospitalized a brick!
I am so mean I make medicine sick!!!


@wtfc360
Yes you can, but better mine at the pool.
And Nope, I installed new wallets, and spread some coins, but I had 3 old wallets all updated perfectly, amounts and everything!

@BorisWCR
Yes you have to.

heh LOL.. Iam so lucky that I am not dev team member