[ANN] ccminer 2.3 - opensource - GPL (tpruvot)

[sp_]

Optimized decred miner for the NVIDIA Maxwell cards for sale. (0.1BTC) (sp-mod #3)

gtx 750ti: 528MHASH (1260mhz core) 35watt
gtx 970 1540MHASH: (1366mhz core) 160watt
gtx 980ti 2390MHASH: (1300mhz core) 225watt

Just tested 1.7.4 on my asus strix.(1260 core) The cuda 7.5 64 bit version is doing 477MHASH

The sp-mod #3 is 10,6% faster.

[1714111943]

1714111943

[1714111943]

1714111943

[giagge]

Link for download ? .

[sp_]

The private has no link. If you donate 0.1BTC to the adress in my signature you can get it. Send me a Private message

[Mohareb]

I get this trying to Benchmark on a Ti 750

[2016-02-18 07:53:02] NVML GPU monitoring enabled.
[2016-02-18 07:53:02] 1 miner thread started, using 'decred' algorithm.
Cuda error in func 'decred_cpu_setBlock_52' at line 320 : invalid device symbol.

I have the same problem. Anyone can help? also have problem with cgminer and error long_polling

[Epsylon3]

doesn't look like my version if you get that cf :

https://github.com/tpruvot/ccminer/wiki/Compatibility

[Stein]

I downloaded ccminer from here:
https://www.nicehash.com/?p=software#nvidiagpu "get ccminer for Windows - Maxwell cards (SP-MOD)"

I have a NVIDIA GeForce GTX 970 4GB
Device ID   10DE-13C2

I've never mined before. Is this the correct mining program for me ? I don't see guide on the command line.
If this is the right one for my card? Could someone help me with a command line please ?

Cheers

[ManiacMiner]

Hi tpruvot. You are planning replace new optimized decred kernel from sgminer to ccminer? sgminer work fine, but with high cpu load.

[pallas]

Hi tpruvot. You are planning replace new optimized decred kernel from sgminer to ccminer? sgminer work fine, but with high cpu load.

On sgminer did you:

setx GPU_USE_SYNC_OBJECTS 1

?

[Epsylon3]

these env var are ignored by the nvidia opencl compiler, and amd seems fine

[Epsylon3]

Hi tpruvot. You are planning replace new optimized decred kernel from sgminer to ccminer? sgminer work fine, but with high cpu load.

its already optimized in ccminer

[ManiacMiner]

Hi tpruvot. You are planning replace new optimized decred kernel from sgminer to ccminer? sgminer work fine, but with high cpu load.

its already optimized in ccminer

Then I do not understand why such a difference between miners. My 750Ti on your ccminer 1.7.5 have ~505Mh/s but with your sgminer i have ~540Mh/s

[crysx]

hi all ...

chrysophylax here ...

im messaging from this 'newbie' account 'crysx' because i have tried to log in to bct from the new premises - and failed miserably - so please excuse the off-topic post ...

due to my computer being a linux machine AND being fully encrypted AND having a password wallet that is fully encrypted - i only ever really need to know a few passwrds ( 16 in all ) ... one of the passwords ( and details as i later found out - due to the questions that bct ask for verification ) i did not alott to memory were those conatined in the personal encrypted wallet ... one of those was bitcointalk password and details ...

yesterday - i tried to log in unsucessfully with the wrong password ... the password is 3 years old - which as long as ive had the chrysophylax profile ... it also has made more than 3000posts and is a hero member - about to go to legendary in the coming weeks / months ... now before any of you carry on about changing passwords regularly and all that - i agree and am totally devoted to changing 'simplistic' passwords ... not ones that require brute force with decryption algorithms and a farm of hash to crack the passwords ... so to move on with the story ...

more than all that - the chrysophylax profile is also is the authority profile for the granite thread AND the dbm thread ( the two projects i currenty have ) and was about to take control of the other coin we have just adopted - ozziecoin ...

when the unsuccessful attempt to log in was tried three times - i attempted to change passwords via email ...

the email was sent from bct to my email address - and i followed the instructions to the 'change password' link - only to have them as a private question - which i have forgotten the answer to also ...

i didnt think that was much of an issue - except that as soon as the submit button was clicked - i receieved the following message ...

Code:

An Error Has Occurred!

Sorry chrysophylax, you are banned from using this forum!
For security, your account has been locked. Email acctcomp15@theymos.e4ward.com

now this shows three things ...

1 - the security measures that bct have in place are brief and not very descriptive ...
2 - the security measures that bct have in place are active ...
3 - the security measures that bct have in place work ...

now i proceeded to send an email to the above email address to theymos - and will see what happens in the following couple of days ... being an easter weekend - i would assume this may take a little more time so ill leave it till mid to end of next week ...

if i havent received a response by then - ill message mprep and see what suggestion he / she will advise of what can be done ...

a three year hero profile like mine should NEVER be allowed to go to waste ( as i know many of you have had profiles lost that are much older than that again ) - and there should be various countermeasures to allow the official owner of the account to prove themselves ( like knowing or remebering the last private messages before the lockout - which in my case was the 23rd march 2016 ) ...

but again - we will see what happens with the responses i get ...

i will keep you all informed of what happnes with this through this profile ive now started ( which is the short version of my name anyway ) ...

as for the update so far ...

the move is being finalized on the 28th march 2016 ( a couple of days away ) which means i will be on and offline here for the next few days - only to be completely offline for a few days while i set up house in the new premises ... this means that i will be only messaging when necessary - and any of those of you that needed my attention before this happened via pm ( there were about 7 pms in all - i only got to answer one ) will need to send a pm to this current profile - until i can resolve this issue with theymos ( and mprep if possible ) - to get back into my official profile ...

thefarm will be down and will not be back in to production until another residence for it can be found - and am currently in the process of looking for a small warehouse for its growth and redesign and development ... that will happen end of next week when i have personally settled into my ( partner and i ) new residence ...

i will be posting this message in all three forums that are granite based - AND - the mining forums i usually frequent ( like spmod and tpruvot thread ) ...

much appreciated for all your support thus far - and hope to be back online soon with my proper profile ...

#crysx

[Ayers]

does the last version only added blakes2 or there are hidden improvements?

[Epsylon3]

only my blake2s "draft"

[sp_]

I get alot of duplicates in the blake2s version on github:

(Nonce xxxxx already sendt 1 second ago.)


(this is my optimized version, but your version have the same problem.)

[Epsylon3]

And you want i fix it to get the rewards ?

[scryptr]

And you want i fix it to get the rewards ?

HAPPY EASTER!

I rolled a 10-cent egg your way.  Thanks for your work on CCminer.  The stratum implementation for DECRED stopped working on SuprNova about 3-4 days ago, my version reads 1.7.4 on boot (Linux).  I've been using both your CCminer and sp_ 's enhanced DCR version.  I mine on the Long Poll port 9112 now (http), it works, but port 2252 (stratum+tcp) is not like it was a few days ago.

I hope other miners also contribute for your work.  Coders like sp_ may enhance the speed, but you laid the groundwork.       --scryptr

[Epsylon3]

Thanks, i didnt know for suprnova... but he was working on it a few days ago

seems to works here (1.7.4) :

Code:

[2016-03-26 22:08:56] Starting on stratum+tcp://dcr.suprnova.cc:2252
[2016-03-26 22:08:56] NVML GPU monitoring enabled.
[2016-03-26 22:08:56] 3 miner threads started, using 'decred' algorithm.
[2016-03-26 22:08:57] Stratum difficulty set to 1
[2016-03-26 22:08:57] decred block 13871, diff 299705.432
[2016-03-26 22:09:01] GPU #1: ASUS GTX 970, 259.20 MH/s
[2016-03-26 22:09:01] accepted: 1/1 (diff 1.385), 259.20 MH/s yes!
[2016-03-26 22:09:02] GPU #1: ASUS GTX 970, 584.54 MH/s
[2016-03-26 22:09:02] accepted: 2/2 (diff 5.508), 421.87 MH/s yes!
[2016-03-26 22:09:03] GPU #0: GeForce GTX 970, 185.74 MH/s
[2016-03-26 22:09:06] GPU #1: ASUS GTX 970, 562.08 MH/s
[2016-03-26 22:09:06] accepted: 3/3 (diff 1.891), 654.34 MH/s yes!
[2016-03-26 22:09:06] GPU #1: ASUS GTX 970, 532.58 MH/s
[2016-03-26 22:09:06] accepted: 4/4 (diff 2.038), 670.34 MH/s yes!

ignore the speeds ,) im mining on yiimp in parallel

[s7icky]

I get alot of duplicates in the blake2s version on github:

(Nonce xxxxx already sendt 1 second ago.)


(this is my optimized version, but your version have the same problem.)

HAHAHAHA are you gonna ask for 0.1 BTC?

[Epsylon3]

out of topic, and no