RealSwissMiner
|
|
November 18, 2017, 02:24:28 PM |
|
My mining rig is running with the Nvidia driver version 384.xx..... Did anyone upgrade to version 388? Any speed changes (positive or negative)?
I would also like to know this - anyone tried the new drivers out and would like to share his/her experience?
|
|
|
|
startsts
|
|
November 18, 2017, 03:18:06 PM |
|
It seems I found the reason of the problem. On ccminer "stratum stale jobs workaround" works badly. Just see what difference on shares in comparison with old ccminer alexis (same stratum difficulty) When I set --submit-stale both miners have aprox same shares-rate. So how to improve my stratum? Maybe I should do jobs broadcast more frequently?
|
|
|
|
haslo
Newbie
Offline
Activity: 13
Merit: 0
|
|
November 18, 2017, 04:59:45 PM |
|
My mining rig is running with the Nvidia driver version 384.xx..... Did anyone upgrade to version 388? Any speed changes (positive or negative)?
I would also like to know this - anyone tried the new drivers out and would like to share his/her experience? I am not sure if I should try it or not because my rig is just running perfectly stable and I dont want to risk that........
|
|
|
|
concorde899
Member
Offline
Activity: 163
Merit: 10
|
|
November 19, 2017, 08:15:30 AM |
|
Will this work to mine BTX using a 5x1070 Nvidia and Ubuntu 16.04? Thanks for your reply.
YES-- Read the Readme. Set the algorithm and point it at a pool, like YIIMP. If the cards perform well, make Intensity or clock adjustments. --scryptr Thanks, I will get into it. If I get stuck I will post here. Thanks for your help.
|
|
|
|
Spi4ka
Newbie
Offline
Activity: 104
Merit: 0
|
|
November 19, 2017, 12:32:19 PM |
|
who knows how to configure ccminer for equihash?
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
November 19, 2017, 12:54:55 PM |
|
who knows how to configure ccminer for equihash?
HERE IS A SIMPLE LAUNCH LINE FOR KOMODO (KMD)-- Komodo is an Equihash coin on YIIMP. Here is the launch file: ===<CUT LINE>=== :loop ccminer -a equihash -o stratum+tcp://yiimp.ccminer.org:2142 -u RLz5eeiuwDi7nz7owbMButBz8rCMZPbxb4 -p c=KMD,d=32 --cpu-priority=3 pause goto loop ===<CUT LINE>=== For Windows, place the loop in a batch file. Do not include the cut lines. For a Linux BASH script, remove the loop statements and simply include the single launch line. Be sure to place your own address in the line after the "-u". --scryptr
|
|
|
|
shubaduba
Full Member
Offline
Activity: 158
Merit: 100
mine safe o/
|
|
November 19, 2017, 02:07:55 PM |
|
My mining rig is running with the Nvidia driver version 384.xx..... Did anyone upgrade to version 388? Any speed changes (positive or negative)?
I would also like to know this - anyone tried the new drivers out and would like to share his/her experience? I am not sure if I should try it or not because my rig is just running perfectly stable and I dont want to risk that........ 388.31 drivers gave only half Neoscrypt hashrate with alexis 1.0 cuda 7.5 ccminer. Rolled back to 384.94 and everything is perfect again (1350 kh/s for 1070)
|
|
|
|
Gongolo
|
|
November 19, 2017, 02:16:13 PM |
|
388.31 drivers gave only half Neoscrypt hashrate with alexis 1.0 cuda 7.5 ccminer. Rolled back to 384.94 and everything is perfect again (1350 kh/s for 1070)
My favourite neoscrypt cuda miner is KlausT 814, in my cfg faster than ccminer 2.2.2.
|
|
|
|
HDAMMO
Newbie
Offline
Activity: 39
Merit: 0
|
|
November 19, 2017, 03:29:02 PM |
|
are there any plans to create for AMD GPU?
|
|
|
|
Spi4ka
Newbie
Offline
Activity: 104
Merit: 0
|
|
November 20, 2017, 06:12:08 AM |
|
who knows how to configure ccminer for equihash?
HERE IS A SIMPLE LAUNCH LINE FOR KOMODO (KMD)-- Komodo is an Equihash coin on YIIMP. Here is the launch file: ===<CUT LINE>=== :loop ccminer -a equihash -o stratum+tcp://yiimp.ccminer.org:2142 -u RLz5eeiuwDi7nz7owbMButBz8rCMZPbxb4 -p c=KMD,d=32 --cpu-priority=3 pause goto loop ===<CUT LINE>=== For Windows, place the loop in a batch file. Do not include the cut lines. For a Linux BASH script, remove the loop statements and simply include the single launch line. Be sure to place your own address in the line after the "-u". --scryptr Thanx, But indicates that there is no connection to the server. trying to connect https://zhash.pro/stats-zen
|
|
|
|
boo50
Sr. Member
Offline
Activity: 472
Merit: 250
lux8.net
|
|
November 20, 2017, 07:15:44 AM |
|
Spi4ka, if you want to mine zen on nvidia better try ewbf or zm miner here are small tutorial for zen mining on nibirupool with links to all miners. https://nibirupool.com/?p=335zahodi, esli 4e
|
|
|
|
Spi4ka
Newbie
Offline
Activity: 104
Merit: 0
|
|
November 20, 2017, 11:14:31 AM |
|
Spi4ka, if you want to mine zen on nvidia better try ewbf or zm miner here are small tutorial for zen mining on nibirupool with links to all miners. https://nibirupool.com/?p=335zahodi, esli 4e viletaet u menya ewbf? vot i reshil poprobovat chtot to novoe
|
|
|
|
santan
Member
Offline
Activity: 102
Merit: 11
|
|
November 20, 2017, 08:28:57 PM |
|
Hi Tpruvot, Why your equihash algo is taking only 80-84 % of GPU while all other algo utilize them fully 99%-100%. This also explains why its Sol/s is 20% slower compared to other equihash miners available. Do you have any plan to fix it ??
|
|
|
|
shubaduba
Full Member
Offline
Activity: 158
Merit: 100
mine safe o/
|
|
November 21, 2017, 12:41:51 PM |
|
Hi! Please help.
I want to change to next miner in my batch file if "--max-diff=x" is higher than i want. But if diff is too high for that algo ccminer dosn't exit, just saying "diff too high, waiting...." How can i make that to exit after diff too high?
Thanks for help
Is there any solution? I'm interested in that too. Don't want to use external algo-switching stuff
|
|
|
|
bensam1231
Legendary
Offline
Activity: 1764
Merit: 1024
|
|
November 21, 2017, 09:52:21 PM |
|
Has Zcoin stabilized enough where you would add it back to the pool?
|
I buy private Nvidia miners. Send information and/or inquiries to my PM box.
|
|
|
clintar2
|
|
November 21, 2017, 10:59:23 PM |
|
How do I do 2 threads per card? Do I need to do -d 0,0 -d 1,1 etc?
|
|
|
|
Maaim
Newbie
Offline
Activity: 6
Merit: 0
|
|
November 22, 2017, 05:28:01 AM |
|
I am a micro miner, one GPU card in my desktop computer, and no programmer, just an "end consumer". I am using the precompiled windows 64 version of ccminer 2.2.2 from GitHub. The miner works, but I am unable to increase the intensity level when scrypt mining. No matter what intensity I set in the command line using the -i function, no matter where in the command line I put the -i function, and even though it initially assigns more threads, it then reverts to a different (?default) intensity a few lines down. My gpu doesn't even warm up, and the hash rate is low. Rather than overclocking my GPU, I would prefer to increase the intensity so that it works harder. How do I get it to actually run with the intensity settings I want? This is what I see:
D:\ccminer-x64-2.2.2-cuda9>ccminer-x64 -a scrypt -o stratum+tcp://us.multipool.us:XXX -u theXXX.1 -p XXX -i 14.99
*** ccminer 2.2.2 for nVidia GPUs by tpruvot@github *** Built with VC++ 2013 and nVidia CUDA SDK 9.0 64-bits Originally based on Christian Buchner and Christian H. project Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.
BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)
[2017-11-08 06:34:23] Adding 16128 threads to intensity 14, 32512 cuda threads [2017-11-08 06:34:23] Starting on stratum+tcp://us.multipool.us:XXX [2017-11-08 06:34:23] NVML GPU monitoring enabled. [2017-11-08 06:34:23] NVAPI GPU monitoring enabled. [2017-11-08 06:34:23] 1 miner thread started, using 'scrypt' algorithm. [2017-11-08 06:34:24] Stratum difficulty set to 131072 (2.00000) [2017-11-08 06:34:24] scrypt block 1631827, diff 10898.083 [2017-11-08 06:34:25] GPU #0: 32 hashes / 4.0 MB per warp. [2017-11-08 06:34:26] GPU #0: Performing auto-tuning, please wait 2 minutes... [2017-11-08 06:34:26] GPU #0: maximum total warps (BxW): 1484 [2017-11-08 06:34:45] Stratum difficulty set to 256 (0.00391) [2017-11-08 06:34:45] scrypt block 1631828, diff 8720.082 [2017-11-08 06:35:09] scrypt block 1631829, diff 8720.082 [2017-11-08 06:36:47] GPU #0: 589791.16 hash/s with configuration T12x11 [2017-11-08 06:39:34] scrypt block 1631830, diff 8720.082 [2017-11-08 06:39:34] GPU #0: using launch configuration T12x11 [2017-11-08 06:39:34] scrypt block 1631831, diff 8720.082 [2017-11-08 06:39:34] GPU #0: Intensity set to 12.0313, 4224 cuda threads [2017-11-08 06:39:34] scrypt factor set to 9 (1024)
I XXX'd out the actual pool, worker name, password, but you can see where I attempted to set the intensity to 14.99 in the command line, was assigned extra threads, then lower down the intensity was changed to 12.0313 with only a fraction of the threads. I have also tried with setting the T levels myself in advance, so that the auto-tuning does not occur, same result. Any help would be appreciated. Thank you in advance.
Did you ever find a resolution on this? I'm running into the same issue with 2.2.2. -i flag doesn't seem to hold and you can't shut off autotune in the Windows version.
|
|
|
|
halker2010
Sr. Member
Offline
Activity: 532
Merit: 250
The harder your life is the more meaning it has.
|
|
November 22, 2017, 05:37:50 AM |
|
you might be able to use --no-autotune 1 for ccminer if you didn't try it out yet.
|
|
|
|
CanadaRunner
Newbie
Offline
Activity: 1
Merit: 0
|
|
November 25, 2017, 03:17:46 PM |
|
Hi, I compiled the new cuda-9 branch and everything compiled without problem. Makefile.am was adjusted to nvcc_ARCH = -gencode=arch=compute_35,code="sm_37,compute_35" for my K80-card Then I wanted to run the benchmark to test my setup. Started fine and then failed
./ccminer --benchmark
...
[2017-11-25 15:14:33] Benchmark algo equihash... [2017-11-25 15:14:33] GPU #0: solver: CUDA error 'an illegal memory access was encountered' in func 'solve' line 2052 [2017-11-25 15:14:34] GPU #0: an illegal memory access was encountered [2017-11-25 15:14:34] GPU #0: scanhash_equihash:192 all CUDA-capable devices are busy or unavailable [2017-11-25 15:14:34] GPU #0: init: CUDA: failed to alloc memory
what could be the reason or the solution?
Thx
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
November 25, 2017, 10:25:22 PM |
|
you might be able to use --no-autotune 1 for ccminer if you didn't try it out yet.
IS "NO-AUTOTUNE" BROKEN? -- I recently compared CCminer v2.2.2 vs. Excavator v1.3.8a minning with NeoScrypt algo. My 1080ti mined at 1.4MH/s (CCminer) vs 1.02MH/s (Excavator). This is at stock clocks and default launch. However, when attempting to adjust Intensity ("-i") on CCminer, I noticed that it would launch at "intensity at 16 (+5)", regardless of whether "no-autotune" was specified and an "-i 17.3" value was set. Is the launch disregarding the flags, or mis-reporting the launch parameters? --scryptr
|
|
|
|
|