Jack1Rip1BurnIt
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 350
Merit: 250
Trust me, these default swaps will limit the risks
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 08:48:28 PM |
|
I personally use these on my fpga rigs - one of these 1000 watt babies will easily power 8-10 54Gh/s bASICS
There you have it guys, thats the power estimation, now we know its NOT "up to 10 27GH bASIC" devices. So, power consumption is anywhere between 1.85w/GH to 2.31w/GH Awesome! I wonder if BFL's will be about the same? I guess we will have to wait at least a month to find out. Oh well ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
Successful trades with bels, misterbigg, ChrisNelson, shackleford, geniusboy91, and Isokivi.
|
|
|
psilan
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:01:53 PM |
|
PSUs and molex connectors are great, i'm sure, but I for one do not have a pc to use with my bASIC. I will be using a RPi to host it, so molex and PSUs are out of the question.
I suppose I will wait for you to specify exactly what kind of dc adapter we will need.
Using a Pi doesn't stop you using a PSU. You don't need a PC to turn a PSU on. My concern about PSUs is I only have a 900W and a 850W. I'll be running 1x54G 1x24G 1xBFLSC 1xBFLlilSC. I can only run the bASICs off the PSU, so I think i'll end up running them from the wall, with clunky US>NZ adaptors. Do you waste power using 900W to power 200/300W only?
|
dip
|
|
|
Ploo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:06:15 PM |
|
Do you waste power using 900W to power 200/300W only?
Nop, only 200/300W will be drawn from the wall.
|
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:06:56 PM |
|
PSUs and molex connectors are great, i'm sure, but I for one do not have a pc to use with my bASIC. I will be using a RPi to host it, so molex and PSUs are out of the question.
I suppose I will wait for you to specify exactly what kind of dc adapter we will need.
Using a Pi doesn't stop you using a PSU. You don't need a PC to turn a PSU on. My concern about PSUs is I only have a 900W and a 850W. I'll be running 1x54G 1x24G 1xBFLSC 1xBFLlilSC. I can only run the bASICs off the PSU, so I think i'll end up running them from the wall, with clunky US>NZ adaptors. Do you waste power using 900W to power 200/300W only? They're usually most efficient around 50% load, but using the 850W will still be more efficient than using power bricks.
|
|
|
|
psilan
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:08:03 PM |
|
Good to know, thanks guys.
|
dip
|
|
|
hardcore-fs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:37:29 PM |
|
Yeah, I love that: ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fwww.raspberrypi.org%2Fwp-content%2Fuploads%2F2012%2F04%2FCE_marks.jpg&t=665&c=ilKhtqCxZCcxbQ) Problem is, that it does absolutely NOTHING to expedite the requirements or shipping, the same way putting "Made in Japan" on an Export box does not get it through customs, given that the export carton is buried inside a 40Ft container inside a ship carrying maybe 10,000 containers. It's the "Declaration of conformity" paperwork that accompanies a product shipment that the customs look at.
|
BTC:1PCTzvkZUFuUF7DA6aMEVjBUUp35wN5JtF
|
|
|
hardcore-fs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:41:13 PM |
|
BTW you can get 12V server PSUs ranging from 300W to 1kW on eBay for about 10USD. These PSUs have a high quality and are a cheap solution to power your mining hardware.
NOPE!!!!! What you get is a copied power supply , with MOST of the safety features and EMI filters removed, coils that have been wound with pubic hair and X2 Capacitors that were really Y1 but had the markings erased and re-printed. Basically you get a Fire lighter in a plastic box.
|
BTC:1PCTzvkZUFuUF7DA6aMEVjBUUp35wN5JtF
|
|
|
Devious
Newbie
Offline
Activity: 40
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:47:14 PM |
|
My personal opinion would be to buy something like this: https://www.bitcoinasic.net/index.php?route=product/product&product_id=54which is a highly efficient and top notch PSU - as far as I know the only PSU certified to platinum efficiency status is Seasonic. I personally use these on my fpga rigs - one of these 1000 watt babies will easily power 8-10 54Gh/s bASICS I would have to agree, I've got one of these in my main PC, it's quiet modular and powerful. It's by far the nicest PSU I've ever purchased.
|
|
|
|
hardcore-fs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:51:27 PM |
|
PSUs and molex connectors are great, i'm sure, but I for one do not have a pc to use with my bASIC. I will be using a RPi to host it, so molex and PSUs are out of the question.
I suppose I will wait for you to specify exactly what kind of dc adapter we will need.
Using a Pi doesn't stop you using a PSU. You don't need a PC to turn a PSU on. My concern about PSUs is I only have a 900W and a 850W. I'll be running 1x54G 1x24G 1xBFLSC 1xBFLlilSC. I can only run the bASICs off the PSU, so I think i'll end up running them from the wall, with clunky US>NZ adaptors. Do you waste power using 900W to power 200/300W only? NO!!!!!! It is a switched mode(SM) power supply not a wall wart Iron cored bitch, as you increase the loading the Switched mode changes its operating parameters to meet the requirements. NEVER use an Iron cored transformer in such a situation, it is a MASSIVE waste of power . What DOES happen, as you increase the Capability of the SM power supply the Base wastage figure increases. So it may be that with NO load 2*400W actually consume less power than a 1*800w, basically it comes down to the leakage of the switching transistors and the Inductors. BIGGER inductors are more wasteful. This is where the difference between the CRAP you can buy on Ebay comes in, Normally such crap is made from the components that do not meet the specs for high quality SM power supplies. I.E switching transistors that are so leaky that they sell under the "Titanic" brand name. HC
|
BTC:1PCTzvkZUFuUF7DA6aMEVjBUUp35wN5JtF
|
|
|
Cablez
Legendary
Offline
Activity: 1400
Merit: 1000
I owe my soul to the Bitcoin code...
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:53:05 PM |
|
I believe what abracadabra posted is correct. The board is supposed to have a female 4pin molex as well as a female DC coaxial connector. My understanding was that it is to be a center +ve 2.1mmID 5.5mmOD type.
I also see from the bASIC website that a power adapter aka "wall wart" does not appear to be included in the accessories so you will probably have to provide your own.
I would wait though for Tom to confirm these points.
Are you sure it's the 2.1mm ID barrel connector? There is also a type with 2.5mm ID. If you use a "wall wart", you will need one that supplies quite a few amps. To supply 100W at 12V, it would need to handle 8.333A. You can get 12V "power brick"-style adapters on eBay rated up to 10A. I plan to use an ATX power supply myself. I trust their quality and output stability more than I do random wallwarts. I'd hate to kill a thousand-dollar piece of hardware because I powered it using a crappy wallwart. As I said that was my understanding from previous pages reading. The exact post I cannot find now. ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif) Tom will let us know. The 2.5mmID 5.5mmOD type is going to be used on the BFL SC singles.
|
Tired of substandard power distribution in your ASIC setup??? Chris' Custom Cablez will get you sorted out right! No job too hard so PM me for a quote Check my products or ask a question here: https://bitcointalk.org/index.php?topic=74397.0
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 09:54:32 PM |
|
BTW you can get 12V server PSUs ranging from 300W to 1kW on eBay for about 10USD. These PSUs have a high quality and are a cheap solution to power your mining hardware.*
NOPE!!!!! What you get is a copied power supply , with MOST of the safety features and EMI filters removed, coils that have been wound with pubic hair and X2 Capacitors that were really Y1 but had the markings erased and re-printed. Basically you get a Fire lighter in a plastic box. You sure do like calling people out, don't you? I purchased an IBM 1300W 12V PSU made by Delta off eBay for $20 a few months ago, and smaller ones are easily available for $10.
|
|
|
|
Bogart
Legendary
Offline
Activity: 966
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 10:29:16 PM |
|
I believe what abracadabra posted is correct. The board is supposed to have a female 4pin molex as well as a female DC coaxial connector. My understanding was that it is to be a center +ve 2.1mmID 5.5mmOD type.
I also see from the bASIC website that a power adapter aka "wall wart" does not appear to be included in the accessories so you will probably have to provide your own.
I would wait though for Tom to confirm these points.
Are you sure it's the 2.1mm ID barrel connector? There is also a type with 2.5mm ID. If you use a "wall wart", you will need one that supplies quite a few amps. To supply 100W at 12V, it would need to handle 8.333A. You can get 12V "power brick"-style adapters on eBay rated up to 10A. I plan to use an ATX power supply myself. I trust their quality and output stability more than I do random wallwarts. I'd hate to kill a thousand-dollar piece of hardware because I powered it using a crappy wallwart. As I said that was my understanding from previous pages reading. The exact post I cannot find now. ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif) Tom will let us know. The 2.5mmID 5.5mmOD type is going to be used on the BFL SC singles. Browsing the connectors on digikey, I can't even find any in the 2.1mm size that are rated to carry more than 5A. In the 2.5mm size they have a few rated for 10A.
|
"All safe deposit boxes in banks or financial institutions have been sealed... and may only be opened in the presence of an agent of the I.R.S." - President F.D. Roosevelt, 1933
|
|
|
abracadabra
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 03, 2012, 11:22:28 PM |
|
I personally use these on my fpga rigs - one of these 1000 watt babies will easily power 8-10 54Gh/s bASICS
There you have it guys, thats the power estimation, now we know its NOT "up to 10 27GH bASIC" devices. So, power consumption is anywhere between 1.85w/GH to 2.31w/GH I'd guess lower than the 1.85W/GH due to cablepairs usage of "easily". I personally would not say a 1000W power supply can "easily" power a 1000W load. I would say that a 1000W power supply can "easily" power a 850W load. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
|
|
|
whizter
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2012, 12:15:31 AM |
|
There was a review of the 1200W Corsair PSU where they measured you could easily pull out more than 1500W from the power supply before it shuts itself off due to overload.
|
|
|
|
DiabloD3
Legendary
Offline
Activity: 1162
Merit: 1000
DiabloMiner author
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2012, 02:08:51 AM |
|
There was a review of the 1200W Corsair PSU where they measured you could easily pull out more than 1500W from the power supply before it shuts itself off due to overload.
Try a NXZT Hale 90 1000. You can pull 2000w from it for 3 months before it pops (although I seriously do NOT recommend this)
|
|
|
|
MrTeal
Legendary
Offline
Activity: 1274
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2012, 03:03:13 AM |
|
Given the costs involved, pushing any power supply over 100% load (or even 89-90%) is really unnecessary and asking for trouble. It's a little different than a GPU rig where you have 4 5970s worth $1200 on a 1200W PSU, another $300 for a nice PSU is a pretty minimal charge compare to the cost of eight 54GH/s bASICs.
|
|
|
|
Jack1Rip1BurnIt
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 350
Merit: 250
Trust me, these default swaps will limit the risks
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2012, 03:11:25 AM |
|
Given the costs involved, pushing any power supply over 100% load (or even 89-90%) is really unnecessary and asking for trouble. It's a little different than a GPU rig where you have 4 5970s worth $1200 on a 1200W PSU, another $300 for a nice PSU is a pretty minimal charge compare to the cost of eight 54GH/s bASICs.
+1 Exactly. If you expect one power supply to handle $9,000 dollars worth of equipment it better be top notch.
|
Successful trades with bels, misterbigg, ChrisNelson, shackleford, geniusboy91, and Isokivi.
|
|
|
Nootropic
Newbie
Offline
Activity: 17
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2012, 03:44:22 AM |
|
Would anyone care to recommend a PSU suitable for powering just one bASIC? Should I just look for the gold/silver efficiency stickers on a 400-600w model?
|
|
|
|
SysRun
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2012, 04:21:52 AM |
|
Hey, where's the FAQ for this thread?
|
Images are not allowed. As your member rank increases, you can use more types of styling in your signature, and your signature can be longer. See the stickies in Meta for more info. Max 2000; characters remaining: 1781
|
|
|
ChiangYay
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 66
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 04, 2012, 05:12:16 AM |
|
PSUs and molex connectors are great, i'm sure, but I for one do not have a pc to use with my bASIC. I will be using a RPi to host it, so molex and PSUs are out of the question.
I suppose I will wait for you to specify exactly what kind of dc adapter we will need.
Me too I'm not interested in molex stuff. Tom could you please just specify exactly what kind of dc adapter we will need and make it easy. Thanks
|
|
|
|
|