Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org

[georat72]

I think this software requires still a lot of optmization

Waiting for version 10.3 every moment with CUDA optimization.
Then Primecoin going to the grave

[1714144449]

1714144449

[1714144449]

1714144449

[1714144449]

1714144449

[1714144449]

1714144449

[1714144449]

1714144449

[cirlama]

thanks eXtremal for your reply about payements

I have 1xGTX 1080 TI + 1xGTX 1070 mining for 21 hours, total around 1 CPD, running fine with defaults nvidia settings, but delivers around 82% of XPM shown in calculator

I also have 1xRX480 + 1 RX580 with defaults amd settings, but both GPUs mine a few minutes and then hang (written in miner windows), even if I underclock them (modified BIOS, blockchain driver, Win10 latest, core i5, cpuload = "2"
somebody has an idea of what to change / test ?
(note: both RX show 0.34 CPD before crashing)

Basically look my settings I posted for RX 580. It runs rock solid with that. I also undervolt a little as power consumption is quite high on this coin.

thanks, so far so good, hashrate at 0.38 CPD and no crash...

[nailk]

The miner keeps crashing on 12 nvidia gpus (linux) even if I enable only 8. Works well on 6-8 gpu rigs.

[rz66]

is 12 gpu win 10 stable?

[sp_]

Miner works with NVidia, but at this moment Linux recommended, because Windows version have a problem - 100% CPU load.

this can be solved with a few lines of code.

https://github.com/pandegroup/openmm/issues/1541

[sp_]

Waiting for version 10.3 every moment with CUDA optimization.

The opencl version is useless with many cards and celeron cpu's in the rig, but it can be fixed easily.

[Amph]

where is -d option here?

[Mapuo]

where is -d option here?

In config.txt

# 0 = don't use device
# 1 = use device
devices =        ["1", "1", "0", "0", "0"];

[Amph]

where is -d option here?

In config.txt

# 0 = don't use device
# 1 = use device
devices =        ["1", "1", "0", "0", "0"];

so if i have 12 gpu i must put 1 1 1 1 1 and 0 for the other?

also is the port for both pool the same? can't find the oen for coinforall

[Mapuo]

where is -d option here?

In config.txt

# 0 = don't use device
# 1 = use device
devices =        ["1", "1", "0", "0", "0"];

so if i have 12 gpu i must put 1 1 1 1 1 and 0 for the other?

also is the port for both pool the same? can't find the oen for coinforall

["1", "1", "1", "1", "1","1", "1", "1", "1", "1","1", "1"] for 12 GPUs.

The port is the same.

[abrgeza]

is somebody tried gtx1060 6GB?
how many cpd per card?

Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers

thanks.
it seems that is not worth mining xpm with gtx1060, too expensive card for just 0.20cpd. amd is still better option.

Of course AMD now is better option because of miner. But let see - 0.20 cpd now is 0.00020000 BTC daily.
I don`t know better option for one GTX1060 at this moment.
Am i wrong?

yes you are but it's not your fault. 
let see: 0.20 (one gtx1060) = 0.0002 BTC daily
            2.00 (ten gtx1060) = 0.0016 BTC daily
            4.00 (twenty gtx1060) = 0.0033 BTC daily

[btcltc2017]

how much you need at least to pay from the pool

AYsheewhy the payment does not come?
wiMgDDM7C69Zxf3RRuctFn2xUt8e

[rz66]

Every time i look back on one of 6 rig systems 1-2 gpus have crashed

[Verionum]

Good Day!

It seems the current version of miner doesn't receive nVersion of block and thought it nVersion ==2 by default.

Such behavior prevent from implementation xpm and dtc on 0.15-0.16 bitcoin platform. Modern bitcoin platform uses version bits logic and nVersion field can vary.

[georat72]

is somebody tried gtx1060 6GB?
how many cpd per card?

Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers

thanks.
it seems that is not worth mining xpm with gtx1060, too expensive card for just 0.20cpd. amd is still better option.

Of course AMD now is better option because of miner. But let see - 0.20 cpd now is 0.00020000 BTC daily.
I don`t know better option for one GTX1060 at this moment.
Am i wrong?

yes you are but it's not your fault. 
let see: 0.20 (one gtx1060) = 0.0002 BTC daily
            2.00 (ten gtx1060) = 0.0016 BTC daily
            4.00 (twenty gtx1060) = 0.0033 BTC daily

OK. Let say you have 20 GTX1060. Could you tell me what exact you mine and it`s more profitable?

[rz66]

OK. Let say you have 20 GTX1060. Could you tell me what exact you mine and it`s more profitable?

if GTX1060 is 0.20 , 20x 0.20cpd = 4.0 chains/day

you can plug 4.0 cpd into the calc at xpmforall.org


4.0 =
XPM per day: 8.755
BTC per day: 0.0034
USD per day: 30.747

[georat72]

OK. Let say you have 20 GTX1060. Could you tell me what exact you mine and it`s more profitable?

if GTX1060 is 0.20 , 20x 0.20cpd = 4.0 chains/day

you can plug 4.0 cpd into the calc at xpmforall.org


4.0 =
XPM per day: 8.755
BTC per day: 0.0034
USD per day: 30.747

Thank you rz66 to letting me know.
May be you know something more profitable at this moment?

[abrgeza]

is somebody tried gtx1060 6GB?
how many cpd per card?

Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers

thanks.
it seems that is not worth mining xpm with gtx1060, too expensive card for just 0.20cpd. amd is still better option.

Of course AMD now is better option because of miner. But let see - 0.20 cpd now is 0.00020000 BTC daily.
I don`t know better option for one GTX1060 at this moment.
Am i wrong?

yes you are but it's not your fault. 
let see: 0.20 (one gtx1060) = 0.0002 BTC daily
            2.00 (ten gtx1060) = 0.0016 BTC daily
            4.00 (twenty gtx1060) = 0.0033 BTC daily

OK. Let say you have 20 GTX1060. Could you tell me what exact you mine and it`s more profitable?

xpm is most profitable but it was not the point of my post.
i'm just want to point you to see how funny is that calculator. just look that ratio in cpd and in BTC.

[Hyp0crit]

how much you need at least to pay from the pool

AYsheewhy the payment does not come?
wiMgDDM7C69Zxf3RRuctFn2xUt8e

First at 1xpm and after that 4xpm. Its automatic.

[georat72]

is somebody tried gtx1060 6GB?
how many cpd per card?

Hi , around 0.20 CPD. But at this moment with the recent miner only one card working fine.
Cheers

thanks.
it seems that is not worth mining xpm with gtx1060, too expensive card for just 0.20cpd. amd is still better option.

Of course AMD now is better option because of miner. But let see - 0.20 cpd now is 0.00020000 BTC daily.
I don`t know better option for one GTX1060 at this moment.
Am i wrong?

yes you are but it's not your fault. 
let see: 0.20 (one gtx1060) = 0.0002 BTC daily
            2.00 (ten gtx1060) = 0.0016 BTC daily
            4.00 (twenty gtx1060) = 0.0033 BTC daily

OK. Let say you have 20 GTX1060. Could you tell me what exact you mine and it`s more profitable?

xpm is most profitable but it was not the point of my post.
i'm just want to point you to see how funny is that calculator. just look that ratio in cpd and in BTC.

Aha, may be deviding with zero point missmash the claculator.
At this moment XPM is most profitable and even the claculator is funny, we are on the wave.
Cheers