Open Source XPM (Primecoin) GPU Miner & Pool xpmforall.org

[MinedTangerine]

lol you cant be serious newb
you did all that work yet missed the 1st page in BOLD font
and you will never know more than me about mining lol
now you can sit there like a dumbass and rock those low CPD's
tbh im glad you arent getting higher just more coins for me
fyi i dont OC my cards all undervolted and if i were getting .4+ i wouldnt be mining with 290x's haha or 290/390/390X's for that matter

What a child (you know living in your moms basement is not ok right?). And still no proff. Meanwhile I am now getting 0.9+ from 290X.

thought it was BS haha fuckin newb
found you on the nets haha https://www.youtube.com/watch?v=Ut7e-0X8lds
your parents cant even deal with your laziness
im guessing your dumb ass didnt know to delete your bin file each time you tried a new driver haha
but of course if you read this thread you would have known to do that

also i must not be hip WTF is proff
you must mean proof lol where is yours?
.9+ is BS unless you mean multiple cards

anyways the fact you got more and yet still cant admit you are wrong shows who is a child be a man admit you were wrong then i might accept your apology

Omg, so dumb you can't realize when I am trolling you. Rofl just special. I rest my case, go back to your basement I am done with your stupid ass.

oh so you were trolling this whole time now nice copout haha

You actually believed in 0.9+. Man you are really thick. Sry can't help you with that. But enough, bickering with children gets you nowhere. So enjoy playing with yourself.

[kev7112001]

lol you cant be serious newb
you did all that work yet missed the 1st page in BOLD font
and you will never know more than me about mining lol
now you can sit there like a dumbass and rock those low CPD's
tbh im glad you arent getting higher just more coins for me
fyi i dont OC my cards all undervolted and if i were getting .4+ i wouldnt be mining with 290x's haha or 290/390/390X's for that matter

What a child (you know living in your moms basement is not ok right?). And still no proff. Meanwhile I am now getting 0.9+ from 290X.

thought it was BS haha fuckin newb
found you on the nets haha https://www.youtube.com/watch?v=Ut7e-0X8lds
your parents cant even deal with your laziness
im guessing your dumb ass didnt know to delete your bin file each time you tried a new driver haha
but of course if you read this thread you would have known to do that

also i must not be hip WTF is proff
you must mean proof lol where is yours?
.9+ is BS unless you mean multiple cards

anyways the fact you got more and yet still cant admit you are wrong shows who is a child be a man admit you were wrong then i might accept your apology

Omg, so dumb you can't realize when I am trolling you. Rofl just special. I rest my case, go back to your basement I am done with your stupid ass.

oh so you were trolling this whole time now nice copout haha

You actually believed in 0.9+. Man you are really thick. Sry can't help you with that. But enough, bickering with children gets you nowhere. So enjoy playing with yourself.

thats it? haha weak

[abrgeza]

With which one do you get 0.56 cpd?

Sorry it's was a typo error. The thing is I was computing the total cpd I'm getting and ended up typing the sum for RX 570. My R9 280x is 0.21 and RX 570 0.35.

Thought so I don't know about R9 280x, but R9 290X does about 0.4 to 0.45, my RX 470 cards do around 0.32 and RX 580 around 0.4. So I think you are doing ok.

wrong a 290X does .5-.54+ when on target 11

Tell me conf settings please? I don't think its possible.

um you dont need anything special thats what a 290X has always done for years now
stock will net you .5+ on target 11 just like target 10 gets you 15+

Which drivers?

have you not read this thread? cause if you had you would know that answer
and thats just to build the bin file anyways does not matter after the fact

Don't patronize me I have read this thread and many others on top of it, more then you probably and I know my way around mining. Thats why I still think you are full of it. Screenshot with .5+ and OC settings, before I even start beleiving you.

if you carefully read this thread you will find my post #500 with screenshot.
you can easily get 0.55-0.56cpd with xpmclient9.4.1 (win10, blockchain driver).
xpmclient10.2.2 is slower but not much.

[kev7112001]

dont bother he just a lazy cheap miner who jumps from coin to coin hoping someone else does the homework while he reaps the reward

[eduardo_rc]

How long do the stats take to show up on coinsforall.org?
I've been mining for a while still displays all 0.

[ans34]

eXtremal maybe these is a way to make even less CPU usage for nvidia cuda miner? 6*1070 make 99% load on celeron G1840 and make less CPD than on i5

[ap1]

eXtremal maybe these is a way to make even less CPU usage for nvidia cuda miner? 6*1070 make 99% load on celeron G1840 and make less CPD than on i5

I know you are asking eXtremal but have you tried setting cpuload = "0" in config.txt?

[ans34]

I know you are asking eXtremal but have you tried setting cpuload = "0" in config.txt?

yep, tried 0 but no noticable difference on cudaminer. I get 0.65 cpd from 1080ti on rig with i5 2600k and 0.5 on rig with e8400 or G1840

[mrpenta]

guys anyone know when exchanges wallet back online?

[kev7112001]

eXtremal maybe these is a way to make even less CPU usage for nvidia cuda miner? 6*1070 make 99% load on celeron G1840 and make less CPD than on i5

I know you are asking eXtremal but have you tried setting cpuload = "0" in config.txt?

xpm NEEDS CPU and you are running 6 cards on a slow cpu at that
this isnt like any other coin you cant cheap out on cpu and expect to load a rig full of cards

[eduardo_rc]

I'm trying to run 5 RX480 on a Win 10 machine, AMD blockchain driver using xpmclient-10.2.2 with these parameters:

sieveSize = 420
weaveDepth = 40960
windowSize = 8192
multiplierLimits = 24, 31, 35

The rest are set in their default values.

It runs for around 2 hours and then it crashes. Anyone got a hint of how I can fix this?

[abrgeza]

I'm trying to run 5 RX480 on a Win 10 machine, AMD blockchain driver using xpmclient-10.2.2 with these parameters:

sieveSize = 420
weaveDepth = 40960
windowSize = 8192
multiplierLimits = 24, 31, 35

The rest are set in their default values.

It runs for around 2 hours and then it crashes. Anyone got a hint of how I can fix this?

That problem could be related to weak psu or bad riser. Try with 4 cards.

[eXtremal]

eXtremal maybe these is a way to make even less CPU usage for nvidia cuda miner? 6*1070 make 99% load on celeron G1840 and make less CPD than on i5

I did not test miner on Celeron G18xx, but know than dual core Celeron G3900 can handle 6 GPUs with 40-50% total CPU load, G1840 not much differ from G3900, 99% cpu load is abnormal. What OS and driver do you use ?

xpm NEEDS CPU and you are running 6 cards on a slow cpu at that
this isnt like any other coin you cant cheap out on cpu and expect to load a rig full of cards

XPM not need CPU power, dual core Celeron at 3.0GHz easy handles 6 GPUs, quad core i3/i5, ryzen 5 and etc gives less than 2% performance advantage.

I'm trying to run 5 RX480 on a Win 10 machine, AMD blockchain driver using xpmclient-10.2.2 with these parameters:

sieveSize = 420
weaveDepth = 40960
windowSize = 8192
multiplierLimits = 24, 31, 35

The rest are set in their default values.

It runs for around 2 hours and then it crashes. Anyone got a hint of how I can fix this?

Quick fix - make .bat file like this

:label
xpmclient
goto label

in miner directory and run it.

[ans34]

I did not test miner on Celeron G18xx, but know than dual core Celeron G3900 can handle 6 GPUs with 40-50% total CPU load, G1840 not much differ from G3900, 99% cpu load is abnormal. What OS and driver do you use ?

OS - win7x64SP1, drvs 391.35 and 388.43. On Pentium G3240 and 6*1070 load is about 80-85% and CPD about 0.3
Maybe speed also depends on how card is connected to mainboard? Cause i see higher speed on card connected on pci-e x8 speed without risers and slower on those connected on x1

[eXtremal]

Link to first release of new Primecoin Core wallet for Windows/Linux/MacOS X: https://bitcointalk.org/index.php?topic=4454417

I did not test miner on Celeron G18xx, but know than dual core Celeron G3900 can handle 6 GPUs with 40-50% total CPU load, G1840 not much differ from G3900, 99% cpu load is abnormal. What OS and driver do you use ?

OS - win7x64SP1, drvs 391.35 and 388.43. On Pentium G3240 and 6*1070 load is about 80-85% and CPD about 0.3
Maybe speed also depends on how card is connected to mainboard? Cause i see higher speed on card connected on pci-e x8 speed without risers and slower on those connected on x1

I found user with 8-GPU rig and Celeron CPU and can't reproduce so high CPU load.. I'll post screenshot soon.
But this rig uses Windows 10, not Win7

[eXtremal]

10 min ago get it in miner:
Message from server: Can't receive work from primecoin wallet
What is it?
P.S. And now show it everytime when I start the miner

Blockchain database corrupted, successfully repaired from backup.

[tar1s]

xpmforall.org  down?

[kev7112001]

eXtremal maybe these is a way to make even less CPU usage for nvidia cuda miner? 6*1070 make 99% load on celeron G1840 and make less CPD than on i5

I did not test miner on Celeron G18xx, but know than dual core Celeron G3900 can handle 6 GPUs with 40-50% total CPU load, G1840 not much differ from G3900, 99% cpu load is abnormal. What OS and driver do you use ?

xpm NEEDS CPU and you are running 6 cards on a slow cpu at that
this isnt like any other coin you cant cheap out on cpu and expect to load a rig full of cards

XPM not need CPU power, dual core Celeron at 3.0GHz easy handles 6 GPUs, quad core i3/i5, ryzen 5 and etc gives less than 2% performance advantage.

I'm trying to run 5 RX480 on a Win 10 machine, AMD blockchain driver using xpmclient-10.2.2 with these parameters:

sieveSize = 420
weaveDepth = 40960
windowSize = 8192
multiplierLimits = 24, 31, 35

The rest are set in their default values.

It runs for around 2 hours and then it crashes. Anyone got a hint of how I can fix this?

Quick fix - make .bat file like this

:label
xpmclient
goto label

in miner directory and run it.

ofc it NEEDS cpu power and a slower cpu like that with crap IPC will effect your speeds this has been known for years now
maybe newer class cheap cpus can handle but not as well as a faster cpu

also why are you trying to start this new wallet you are not sunny king the dev of primecoin
already not good that your pool holds most the network

[ans34]

I found user with 8-GPU rig and Celeron CPU and can't reproduce so high CPU load.. I'll post screenshot soon.
But this rig uses Windows 10, not Win7

maybe OS makes difference
Here is screen of system with Phenom 2 X4 955


And here is G1840


There is some strange system load when running miner

[eXtremal]

also why are you trying to start this new wallet you are not sunny king the dev of primecoin
already not good that your pool holds most the network

It's incorrect question, because "new wallet" don't implement any soft fork or hard fork, it full compatible with current network. Look here https://bitcoin.org/ru/choose-your-wallet
May be you think, that all these wallets made by Satoshi?
And don't forget, last update from developer was at 2013 year.

maybe OS makes difference
Here is screen of system with Phenom 2 X4 955

I don't see GPUs amount on second screenshot, but 42% CPU load looks normally.