Better than my guess for the contest:
69,820 MishaMuc 70,000 philipma1957 70,500 Slot Kid 71,500 fillippone 72,239 cAPSLOCK* 72,400 Phil_S 72,555 OutOfMemory
What if the price is $ 72,401? Would Phil_S win, because his guess is more close or would i win, because the price would be over Phil_S's guess?
|
|
|
Slow upwards grind now until the end of summer & then moon? We can hope hey but oh my, those couple of weeks were horrible. I have to admit I was petrified haha, sold nothing though.
Why would you? Unless you'd need the fiat, of course.
|
|
|
I need to learn some terminology, what's slicing?
Holy moly 2900 bucks A YEAR for autodesk.
I have recently just got into 3D printing myself (funny how that happens hey) Picked up an ender 3 V2 and really enjoying the experience. I am now about to embark on building my own from scratch based on the Hypercube Evolution. BTW I use CURA for slicing. Seems to do a very reasonable job and I also play around with tinkercad and have had pretty good results so far. Struggling a little with PETG printing though but PLA is is a breeze. You always tend to get stringy results with PETG/CEP when you don't have a cabin. Built my own, now it's working much better. EDIT: And reduce cooling fans to 10% or even "off" when printing PETG, while the travel speed (moving between printing paths) should be as fast as possible, which keeps down the stringing. Print at low speed, about half of PLA. @Arrie: I'm using "3D Builder" (Yeah, it's Micro$oft, but free) for easy modeling. It's half intuitive. Just define, place and combine (or exclude) simple 3d objects to make more or less complex structures. Didn't master the learning curve with the free CAD proggies. I'm using Cura as slicer. Good enough. Thanks, I'll take a look at that. However, worth to add is that i found out if you want to model threads, 3D Builder is unusable. You'd need Fusion360 or one of the free 3D CAD programs. No easy way to get threads, that's why i still cut them in metal and press/glue them into the 3D prints.
|
|
|
...The only thing it will change is you'll become a rich old fuck when you will sell your coins for evil fiat (because you won't be able to buy shit with bitcoins in your lifetime) and still embrace the materialistic consumerist society, whose only aspirations from what i read is slapping models on a yacht and buyin lambos Slapping models? ...Lambos? ...Yachts?! You sure mean a different thread... We here are all about humping cows on the golf course of a bigass ranch in the middle of Nowhere, Texas. Wait, are you one of those future-kids?
|
|
|
I need to learn some terminology, what's slicing?
Holy moly 2900 bucks A YEAR for autodesk.
I have recently just got into 3D printing myself (funny how that happens hey) Picked up an ender 3 V2 and really enjoying the experience. I am now about to embark on building my own from scratch based on the Hypercube Evolution. BTW I use CURA for slicing. Seems to do a very reasonable job and I also play around with tinkercad and have had pretty good results so far. Struggling a little with PETG printing though but PLA is is a breeze. You always tend to get stringy results with PETG/CEP when you don't have a cabin. Built my own, now it's working much better. EDIT: And reduce cooling fans to 10% or even "off" when printing PETG, while the travel speed (moving between printing paths) should be as fast as possible, which keeps down the stringing. Print at low speed, about half of PLA. @Arrie: I'm using "3D Builder" (Yeah, it's Micro$oft, but free) for easy modeling. It's half intuitive. Just define, place and combine (or exclude) simple 3d objects to make more or less complex structures. Didn't master the learning curve with the free CAD proggies. I'm using Cura as slicer. Good enough.
|
|
|
Buy the dip Thanks, two years ago i had my vasectomy which cost me $600. Now you basically told me i could have bought the 2019 Dip with $70k instead... EDIT: I just wanted to tell you guys, i had to sell (less than 1% of my stash) to be able to pay my new doors for the house extension, almost exactly at trend reversal. I knew this. I just had no choice. NOT a Mindrust event. I wish they could have delivered the doors with one or two weeks of delay Those must have been some MIGHTY doors Unfortunately not. Prices increased roughly 30% this production cycle, the doors are solid, higher quality and sound damping, for sleeping rooms of me&wife and our youngest child's room, right next to it. Hey, i'm not the youngest but i still have a sex life EDIT: Forgot the main point. It's not the price of the doors, it's more the size of the stash. But i'm good, i could still be a nocoiner, you know...
|
|
|
Buy the dip Thanks, two years ago i had my vasectomy which cost me $600. Now you basically told me i could have bought the 2019 Dip with $70k instead... EDIT: I just wanted to tell you guys, i had to sell (less than 1% of my stash) to be able to pay my new doors for the house extension, almost exactly at trend reversal. I knew this. I just had no choice. NOT a Mindrust event. I wish they could have delivered the doors with one or two weeks of delay
|
|
|
like i give a fuck about your opinion lol who do you think you are augustus of moronus
i will not post shitcoin charts allright but u can still go fuck yourself
these guys i swear you think you're the elite of the world because you own bitcoins haha
Thats not the point, Mr. Genius. Hint: The title of this thread. Regardless of how much OT, spam, fun&giggle posts, when it comes to crypto, it's only for Bitcoin in here.
|
|
|
i swear if doge falls to 0.2 i will break my rules and rawdog it >Edit : on second thought and after taking a step back 0.13 being the likely low before shoulder i will reassess ok buddy you've had your fun but now you can fuck right off, thanks posting shitcoin charts is NOT happening here, go away you asshole I can't believe you don't have that ... on ignore yet. A no brainer after his second of recent posts here, or so.
|
|
|
Okay f*****s who sold, you told me you are not selling, i thought we had a deal we are hodling I am poor now
1 year ago i was ultra poor
Well back to cage to sleep for a few more years
Sarcasm press
*yawn* Who cares? All that counts is who bought! Do you know about Mindrust already?
|
|
|
Looking for a double bottom there?
|
|
|
Did it ever went down midcycle (similar position) below the prior ATH? Nope. Therefore, unless we are witnessing something entirely new, somewhere around 25K could be a "natural" attractor because it corresponds to roughly 61.8% decline (Fib number) IF we will go below the prior one (50%, where we are right now, give or take).
Because of this, it either bounce here or at 25K (plus minus a thou or half a thou), IMHO.
With so many liquidated leveraged trades, the "bounce" will likely start as a "crawl". But anyway, i'm good with how things are. Mostly anytime.
|
|
|
To all people new in crypto/trading.
You should not trade before you can answer this correctly:
A man buys a goat for 60. Then he sells it for 70. Later, he buys that goat back for 80. Then, he sells it again for 90.
How much profit did he make?
Reply in comments also!
https://twitter.com/LSDinmycoffee/status/1396253987725262851?s=03Give us a timeline? Have to bring inflation to the calculation... All the info needed to answer this correctly is already there.
|
|
|
IMO, this dip has to be the capitulation signal. No strong resistance yet, but now it should be there. If not, well... (...we'd be fucking fucked)EDIT: Found this, for the laughs of y'all: To all people new in crypto/trading.
You should not trade before you can answer this correctly:
A man buys a goat for 60. Then he sells it for 70. Later, he buys that goat back for 80. Then, he sells it again for 90.
How much profit did he make?
Reply in comments also!
https://twitter.com/LSDinmycoffee/status/1396253987725262851?s=03Don't jinx it
|
|
|
Crypto wasn't created to make you rich — it was created to make you free. Though as first believers, understanders, pioneers, news bringers, buyers, rebels against current monetary system etc etc We deserve the freedom as an increase in our current wealth ... So its becoming a get rich or get richer thing as well... The thing is this, though: Everybody should have as much freedom as he/she can handle. It's individual and individually volatile. For example, think about a teenager, how much freedom he'd want, and how much of it he could actually handle... EDIT: #hodlsleep and battery drain sleep. good nite!
|
|
|
A problem for many though I scammed them, my first shift starts back on Monday Translation: MCD is stacking Sats and doesn't want to support their competitors?
|
|
|
n00b[/i], very maybe you will understand one day
it would be sad if i didn't after 6 years of trading (with huge breaks tho), some alts like xrp cardano and the likes are very bouncy and easy to trade when the frenzy is on. And it's fun. Whatever. Sorry if i sounded arrogant. i'm aware holdlers make much more money in the long run, it's just not my thing Shitcoins, Hodl-averse mindset... I doubt this is the right thread for you. What do you really want? Troll us? A very weak attempt, i'd say, followed by the mandatory add to my ignore list
|
|
|
holdsleep be like : Nope. This is daytradersleep. Well, could also be shitcoinersleep
|
|
|
Gonna rock the drumset for half an hour and go to #hodlsleep. See you guys
|
|
|
This is the first time i realize that this dude is looking fucking stoned. Or am i just projecting? Nothing dramatic has happened. Yes, the dip can be called a crash, but I don't think that it will have a negative impact on the bull market. I still think we are on the way to 100K this summer. Hopefully this dump is caused by Moron Musk. He may be selling his coins on a loss now. I'm sure he feels no shame or guilt, since he is an aspburger imbecile. But we need to get rid of this cancer as soon as possible. Anyway, from my observations since 2017 any daily 30% crash is finished when there is a 25%+ recovery. In our case we need to get to 37.5K to be safe. And in several days something like a double bottom around 33K-35K will seal the end of the correction. And during the writing this has happened, so cheers, we are out and free to go up! I hope for no double bottom this time I guess we are in the bold part now. I really don't know why practically every big recovery which I've witnessed so far follows that patter. I guess the answer is the infinite pain of the trend followers losing their last satoshis. RIP morons. Strong hands as always - rejoice, the path to 100K and beyond is wide open! This is Bitcoin! When you think it can't go deeper any more, it suddenly goes up again.
|
|
|
|