yes my login issue was resolved, by adding my phone number in the system. That operation took few days to accomplish, that's why i made a joke that it's a "one man show". Don't feel insulted.
Thanks for resolving my/yours issue.
|
|
|
Probably a one man show
|
|
|
Few days and i'm still waiting on you to add my phone num so i could log in into wirexapp site... My request id : 83489
|
|
|
bad exchange rates. really really bad.
|
|
|
(68.3 + ~40 ) = 108.3 W + min. 40w for motherboard = total 148w
No, it cant be 95w from wall, im sorry. Even a photo wouldn't convince me.
If your riser is taking up 40w then I would recommend you change another brand as it will surely melt any of the power cable. It is taking 60% value of a graphic card. Not very efficient running at 40w just to power up a riser. 40w in my math is what adaseb wrote 44w, the value in gpu-z is not the real w, its just the gpu, approx you have to add 40-45w to what you see in gpu-z, and that's only the video card. 40-50w for the mobo,hdd with one card idle. If you have 6 cards on the mobo then it's about 120-130w for the mobo and idle cards.
|
|
|
Can't log in on the new interface, so i cannot access my account. Phone number is not set?! 1. Never had that on e-coin 2. How can i set it if i can't log in?
|
|
|
(68.3 + ~40 ) = 108.3 W + min. 40w for motherboard = total 148w
No, it cant be 95w from wall, im sorry. Even a photo wouldn't convince me.
|
|
|
adaseb, that card has def. mem 1650mhz ? Im planning in buying a few, is it working ok? How much can you push the mem?
|
|
|
yes, for now i tried to raise memory more but didn't get better result i only modified straps 1750-2000, nothing else, very happy with results Try 1130/2150, maybe you get more, i think 1075 is too low.
|
|
|
all of your cards can handle 2150mhz mem ?
|
|
|
you can do everything you want in wattTool , you don't need afterburner at all.
|
|
|
not sure 580 will change things significantly in performance per watt. More likely next generation Vega will though. 580 cards are the same polaris chip so until Vega we won't see anyting spectacular.
|
|
|
95w in Gpu-z no ? Thats awesome if from wall, whole computer about 155w ?
|
|
|
I'll prepare documentation this weekend to go along with all of this, that makes it clear what you're doing when you change stuff; and what each value is used for. You're very welcome. This stuff shouldn't be kept hidden - the straps are the important things, and people will still pay handsomely for straps.
Did this happen ?
|
|
|
that card has samsung mem so copy 1750 to 2000
there is tRAS value different from 0 so its either elpida or micron. he clearly stated it was Elpida. He edited his post, but doesnt matter, its not samsung
|
|
|
that card has samsung mem so copy 1750 to 2000
|
|
|
For RX 470 cards mining solo ETH, put -asm 1 -dcri 8
I have sapphire's with samsung, and xfx with hynix, on both cards dcri 8 is the best.
|
|
|
asm mode making hash worse on tonga. altough on rx 470's i got a +0.4mhs speedup per card which is nice.
|
|
|
i doubt they check mem timings
|
|
|
Tired of setting each card voltage? Offset not availible in Your bios?
I lowered the voltage by setting the top gpu voltage to P4 or P5 (65286 or 65285) in polaris. So You get automatic a low energy high hash rate without too many try and error per card.
Polaris GPU table: 1000 65284 1050 65285 1075 65286 1100 65286 1125 65286
Set memory voltage in WattTool to 900 or lower as the low limit for VDDC.
Gives 1060W from the wall for a 7x RX480 rig @204MH/s. More MH by tuning each card's clock.
You should be able to do better than that. I've got a 7 RX480 rig pulling 207mh/s, each card at 1125/2050, pulling just 940w from the wall. I haven't even tried lowering the memory voltage. You can't lower the memory voltage.
|
|
|
|