Quick question on what I'm looking at.
When the miner starts to mine, what does the time on the far right of every update mean?
If it says Time: 00:10 does that mean 10 seconds pass or minutes pass?
hh:mm
|
|
|
I think that it really needs that sweepstake option fixed, i mean the one that was the initial idea and had to be turned off to gain stability in network. If that ever gets fixed i am sure a lot of people will find this coin very interesting. And yeah, lightning fast transactions are great
|
|
|
every coin is a good coin if people see something useful in it. Of course lot's of pump/dump happens on every coin, but only coins that really offer something can survive.
|
|
|
with eth bios and clocks (that means lower gpu clock) i get 780-790 h/s @ 90w from wall with 470 4gb. So you guys are obviously doing something wrong.
|
|
|
Can someone just post a clear How To for undervolting a 5xx card with these drivers in Win 10?
I can get them undervolted in Wattman but one reboot and its lost. Need bios undervolt instructions or some clear method. I read one guy was successful with Aug 11 drivers and Trixx.
there is no universal fix for this, something that works with one card, may not work with an other. So if you read this thread from page 1, and try out everything that is written, i am sure you will succeed in undervolting with these blockchain fix drivers.
|
|
|
blablabla, 2018 POS, so no problem for 4gb cards.
|
|
|
Interesting project, maybe i'll buy a few of these.
|
|
|
or he is using these shitty blockchain fix drivers, and that's his problem, not the bios editor.
|
|
|
i bought this one with my own cash, but the house, pool and ferrari is from the donations. They just don't stop coming.
|
|
|
i know absolutely nothing about nvidia, sorry. Just recently bought a 1060
|
|
|
but then again, are those edited bioses working after flashing with a programmator? I mean, some checksum in the bios itself has to be fixed too, no ?
|
|
|
Can someone confirm that watt tool 0.92 does not and cannot change voltages on the latest driver?
RX480+4xRX470 Work fine with the driver from 23.08 lol, yes works fine, except everything is 0 in wattool Look to the "Voltage offset" box works only with cards that have the vddc offset added in to the voi, and that is a small percent of cards, you can believe me.
|
|
|
Hi All,
I have 12 * Saphire RX570 Nitro+ 8GB OC cards split across 2 rigs running Linux and have copied the memory straps, amended the default core and gpu speeds and so the first part is fine as the cards are giving me an average of 24.8Mhs using the config 1281/2150.
However, when it comes to undervolting, I've tried using SRBPolaris to do this by setting the voltage at 850 however after saving the rom and flashing, after a reboot of windows the card is still drawing 147w. If I then manually undervolt in Trixx by -150 then the draw comes down to 114w which is much more acceptable.
As my rigs are running Linux I need to undervolt via bios mods hence the plea for help as I'm obviously doing something wrong, I just don't know what.
I've read lots of references to having to HEX edit the bios to do this, if this is the only option, can someone point me to an article that will educate me in how to do this (safely) as I thought that either PBE or SRBPolaris were writing the necessary changes to the .rom file and therefore not clear on what the HEX editing will do that these utils are not?
Apologies for the noob questions, this is my first setup and am very eager to learn!
Cheers
My tutorial: https://forum.ethereum.org/discussion/comment/82600/#Comment_82600Or hire me (rates are at my owner's site): http://ohgodagirl.com/vbiosi get a % from this if he hires you, cause it's all happening in my thread, so my rules apply
|
|
|
i like reading everyone complaining how these drivers don't work for them, and there are my rigs hashing at full speed with these drivers for about 3 weeks now.
|
|
|
Can someone confirm that watt tool 0.92 does not and cannot change voltages on the latest driver?
RX480+4xRX470 Work fine with the driver from 23.08 lol, yes works fine, except everything is 0 in wattool
|
|
|
you sir are asking that in a wrong thread
|
|
|
Did anyone check new non-beta driver Crimson ReLive Edition 17.8.1 (release date 21.08.2017)? Does it include GAG Issue fix from mentioned beta driver?
it includes FAG issue fix
|
|
|
what kind of updates do you want? It works. Maybe they could update it so the hashrate rises, like from 30mhs to 35mhs. If they can 'fix' and give back 'lost' hash, they could 'fix' it to give more mhs.
|
|
|
im mining this coin only because of the name "sweepstake", but the sweepstake option is turned off lol Hope you guys at CWI fix that, cause that idea makes this coin interesting.
|
|
|
and now all the bandwagon people jump on within the last few days making it not profitable to mine sweep anymore...
This is how these things work mate
|
|
|
|