[...]
Im on half way with the strap editor [...]
Maybe in a week or so.
Does it mean we will be able to set TRCDR, TRCDRA and so on using colourful gui? That's the plan  |
|
|
|
Good job, neighbour, now I can change my vddc without using HxD  Altough it's working, i don't know why it won't "take it down" to the entered value if you are below 1V. A value has to be changed somewhere more, but atm i don't have enough time to play around. Setting the desired value and then running WattTool and just pressing "set" at the mem p1 will change it to the desired value. Have to find what value does that actually change thru i2c. Actually, sometime it works without touching anything. This morning my rig rebooted and when I started wattTool, voltage was already set... Wattool does that..sometimes... Im on half way with the strap editor, got too much work on my job, so no time to work on this  Maybe in a week or so. |
|
|
|
Good job, neighbour, now I can change my vddc without using HxD Altough it's working, i don't know why it won't "take it down" to the entered value if you are below 1V. A value has to be changed somewhere more, but atm i don't have enough time to play around. Setting the desired value and then running WattTool and just pressing "set" at the mem p1 will change it to the desired value. Have to find what value does that actually change thru i2c. |
|
|
|
|
My issue is resolved.
Thanks!
EDIT:
Now i got another problem, all my events and history disappeared !?
|
|
|
|
Is this tool allow to unlock the additional 4 GB on my RX480? PBE says there is 2 VRAM modules: H5GC4H24AJ & EDW4032BAB.
No. |
|
|
|
Poked around with some RE and unpacked it; it's clean. You can decide whether or not you trust me.
Thanks doktor83!
Yeah, it's not hard to unpack, i would say it's easy if you know how to  (did not use agressive packing with intension  ) Thanks godGirl |
|
|
|
Need unknown can save version thanks
Will be, today. |
|
|
|
Wirex isn't a scam (well, it wasn't before -> i was all happy before on the e-coin platform), but they have a lot of problems lately..
Exchange rate is really too high, should be less for about 3-4%.
I sent over some BTC last night and it shows the transaction went ok , but the BTC never arrived on my account.
Thanks for the trust. Please, give us your support ticket number so we can track the issue with the support team. Im sure they will fix this issue of vanishing BTC, because on the block explorer i can see that the amount is there. But for the exchange rate... I believe nothing will change As you know, This month We have just launched a new version of the platform: Wirexapp v2.0. And today, we launched the first revisions, Wirexapp v2.1, where most of the general issues have being addressed and corrected (including the heavily mentioned Wirex Bitcoin Rate  ). Please, feel free to make your own review. We are always doing our best to keep up to date, and we are good listeners. My ticket number is : Request #91456Thank you |
|
|
|
Wirex isn't a scam (well, it wasn't before -> i was all happy before on the e-coin platform), but they have a lot of problems lately.. Exchange rate is really too high, should be less for about 3-4%. I sent over some BTC last night and it shows the transaction went ok , but the BTC never arrived on my account. Im sure they will fix this issue of vanishing BTC, because on the block explorer i can see that the amount is there. But for the exchange rate... I believe nothing will change |
|
|
|
I already sent him a code in vbscript and he can't run it... access denied stuff.. with proper user access on the system, shouldn't be an issue to make this work. If you are trying to circumvent the basic system authentication and other safeguards for people not running apps that aren't supposed to; well, that's getting into the behavior and actions of malware and viruses... Modifying and starting background processes is a malware heuristic; 'tis why it will need administrator priv.... so if you wanna do a third party solution to circumvent the systems; I won't do that part for you...  If you know how to access the hidden C$, D$, etc shares; you should already know how to accomplish it. This link will explain it better than I did. i don't know what and WHY are you talking about this to me, but OK, suit yourself I just wrote he has some problems with running vbscripts on his machine |
|
|
|
All the info is out there, so yes, even your mother knows it all. I don't think this should go in the way of why i did it this way, why i didn't do it that other way... I mean if its useful to you, use and say thanks, if its not, dont use it and end of story |
|
|
|
McAfee Antivirus claims that SRBPolaris Bios Editor contains a Trojan. Beware!!
Code is packed, that's why. If the next 3 comments will be why not open source & contains virus , i will delete the thread , cause obviously people don't want free tools. Don't download claymore miner either, cause it's not open sourced & antivirus delete's it Honestly, it's not about paid/free, it's about trust. You may have 250 posts on this forum, this still doesn't mean that anybody can trust you. Who's to say your account wasn't hacked? The internet has become quite a dangerous place... Don't forget that everyone here has big money invested in mining, so it's legitimate that people wonder why you keep it closed. Not saying you're a bad person or that you have a malicious agenda, but try to understand why people are having a hard time trusting someone who offers something for free with a closed code... I get that, all of it, and you are right. People can choose : use it or not. Who thinks its infected by any trojan or virus, just don't use it. |
|
|
|
I already sent him a code in vbscript and he can't run it... access denied stuff.. |
|
|
|
GPU Voltage shows me 65288 mV  its the same in Polariseditor. on 300Mhz its shows 900mV, on 795 MHZ 65282 ... how to fix that ? just edit 65288 and enter the mv you want |
|
|
|
Upload it on filedropper cause i can' access this without your login |
|
|
|
|
Probably unknown type. Send me bios in PM so i can check it.
|
|
|
|
Hey Guys,
Need help on Dual mining.
I want to dedicate my miner as 75% for Ether and 25% for other alts. Please guide how to do the same.
set dcri accordingly |
|
|
|
Great little piece of software. Flashed an entire rig with my settings, it is nice you can set that target temp so no longer I have manually set up fan curve.  Thank you Did you lower your voltage with SRBPolaris ? Yes I got it to set and hold the voltage I wanted. I am using a low power setting that im happy with, 62 watts at the core. 62w is very nice Which cards are that ? |
|
|
|
|
Show Posts
