Great little piece of software. Flashed an entire rig with my settings, it is nice you can set that target temp so no longer I have manually set up fan curve.  Thank you  Did you lower your voltage with SRBPolaris ? |
|
|
|
oh no! im busted  |
|
|
|
I had not much time for testing due to urgent DCR fix, just noticed slowdown for Polaris on Linux. It is because OpenCL reports that it has 14 compute units (CUs) instead of 36. You can fix it by using undocumented option: specify "-eqlim 288". 288 = CUs * 8. I hate this magic, so I'm working on next update that will have good hashrates with 100% stable mining speed on both Windows and Linux. Just wait a few days.
Thanks Clay, looks like it's working on Windows. Polaris cards have 32CU no ? 32 + 4 locked |
|
|
|
dcri reduced -2 and have almost same speed ETH as 9.1 but lose 10% ot DCR speed. Maybe its more stable i have too random drops -5% on ETH but its good to see we have new version. thanks
I got exactly the same behavior on 380/470 cards. |
|
|
|
Thanks for the tool.
Would Linux pick up GPU voltage set via Bios edit?
Of course, that's the point of editing the voltage in the .rom so, you don't have to use tools to achieve the same. If voltage really works in linux i will donate. Have no time to verify it myself right now What cards ? |
|
|
|
Thank you for the tool, Ill test it for sure and don't pay attention to some idiots, if they don't need it nobody is forcing to use it Anyway I got a question under Voltages, you got "modyfication type" with and without VDDC mod. What this is all about? Sometimes changing VDDC is not enough, so if the "without vddci" option is not working for you, try the other one |
|
|
|
In regards to changing gpu core voltage.
All my roms have always shown some number in the field very high such as 65288 mv
Can I change it to something like 900 mv and will it work? I have always left it alone and used afterburned to down volt, I figured the bios wasnt being read correcttly in the voltage department. applys to sapphire 4gb cards 470/480
That 65288 is just a pointer, you can change it to the actual voltage you want, ex. 900, yes. |
|
|
|
Oh really... only rejects with dcr. Hope Claymore will release new version today,
Until then... put your GPU's on a little break |
|
|
|
Nothing new that you couldn't do with a hex editor ,that is true Something that PBE doesn't have for sure is the default freq. setting for GPU and MEM. I think that is important in bios modding, so that's why i added it. |
|
|
|
It is almost half of 2017 and mining etherum or ZEC or monero is not profitable anymore.
So what to mine with ATI graphic card and it is worth to mine.
I have 2 R9 280X and 2 R9270X
And what to mine with Litecoin Asics which are about 350Khz I also have fev of them, because litecoin is not profitable to mine with that anymore.
Ethereum is not profitable? Are we in a different universe ? For 270x cards mine ZEC or ZCL |
|
|
|
Hi guys,
Still looking for a solution of this.
Anyone with clear idea?
Thanks
Are you going to CPU mine or GPU mine ? If your answer is CPU, then lots of cpu miners have a background mode, so no window will be open. edit : they are still visible in the processes list. |
|
|
|
Some of the big guys here could confirm this (that packed soft. is reported as virus), but i think they rather have fun reading all of those accuses i get than helping |
|
|
|
Thanks for this new version.
While I'm not against closed source, I do have some questions.
The false positives in your version all indicate around a virus and backdoor application.
Could you help us understand why you think these false positives are occurring?
To be clear: I'm not accusing you of putting something malicious in this build, I'm just curious if you have some idea why VT would falsely flag it.
Thanks again
I know exactly why. Since im working in .net, i used Confuser to pack & protect the code, so it wouldn't be too easy to decompile it. Not that i have a trojan or virus in there, but since i work on it a lot, i think it belongs to me Try it yourself, just make a simple .net hello world or anything, and pack it with Confuser, or any other packer. Antiviruses will go crazy. |
|
|
|
Thanks for the tool.
Would Linux pick up GPU voltage set via Bios edit?
Of course, that's the point of editing the voltage in the .rom so, you don't have to use tools to achieve the same. |
|
|
|
There is stuff in PBE that's interesting only to advanced users. I tried to make this one 'beginner friendly', with less but important options. I modify my own bioses with it, so i don't need any afterburners, trixxes and stuff like that at all. - Copy lower strap to higher ones by one click - Set GPU and MEM default freq. - Set VDDC - Set TDP, TDC and max.temp. This can all be done in 1 minute,and you got yourself an all in one bios, and no need for wattman and friends anymore. Thanks for your support and not being assailant as the other guys It would be great if you make some possibility that PBE can't do. F.e. memory voltage for each Pstate. Memory voltage can't be changed, its fixed at 1.5V. Hardmod is required to change it. That exists in PBE is VDDC change but it isn't working. Global vddc setting works 100% every time (and you don't have that in PBE either), but the only cards i saw have this possibility by default are some sapphire nitros. This can be added to any bios if that card is using a IR3567B chip. It's not hard, but the tables lenght recalculation is a bit tricky. Regarding settings by state, i made my own way of doing that in SRBPolaris. You enter the value you want for the last state, then the prog. calculates everything for you. Unfortunately this does not work on every card, usually the vddc is higher than the one you set. I'm still researching this. Not true for some ASUS cards! No polaris10 based asuses here, so i couldn't try, but i believe you |
|
|
|
|
Decred has made stake version 3 active, all blocks have to have stake version 3 included in the header.
|
|
|
|
Puzzled with this Rx480 Asus Dual 8Gb, same memory straps that came with my reference ones, did the same mod to the straps ( 1750 to 2000 ) and it keeps crashing.
Anyone think it could be a duff card?
Ii bet your mem is micron ? Samsung memory  Its actually samsung. I can advise you to lower your VDDCI to 850 and try again. I had one of those gpus that crashed on stock, lowered vddci and it was more stable. I had the same thing on xfx cards, always crash on stock voltages, but when lowered, works ok  |
|
|
|
Puzzled with this Rx480 Asus Dual 8Gb, same memory straps that came with my reference ones, did the same mod to the straps ( 1750 to 2000 ) and it keeps crashing.
Anyone think it could be a duff card?
Ii bet your mem is micron ? |
|
|
|
iv got a whole farm of only xfx black 470 4gbs and today just by chance ended up with a MSI 480 8gb with samsung. of course did a quick run stock to see,got 25mhs..tried 1500 strap as usual,couldnt build dag. memory at anything over 2000 it doesnt mine. did a quick look through this thread as iv been following hoping for better straps for my 470(elpidas) .anyway to the point,470s im getting 29.3/250 dual mining eth/pasl. this damn 480 now matter what i do i cant get it over 28!... tried this strap
777000000000000022CC1C00106A5D4DD0571016B90D060C0060070014051420FA8900A00300000 01011333DC0303A17
was posted on page34(not sure who created it,sorry,thanks tho!)...WHAT GIVES...is the msi gaming x just crap or am i missing something that is special to this card?
Samsung you use the 1750 Strap and all my samsung 470 4gb cards are doing 29.5 to 32 MH/s i want to see those 32mhs can you share a screen ? |
|
|
|
|
Im sure his cards can run 29.5mhs with no problem, but he is probably on 28mhs because of the power efficiency, but then again, raising the mem mhz isn't affecting power usage drastically.
|
|
|
|
|
Show Posts
