You forgot about PM uses less power than any other miner like lol or TR. So his loses in effectivity about some part of percent compensates by power economy in some percent!
|
|
|
Quick breaking news:
If you mine ETC with lolMiner you might have seen a high number of "stales" in your dashboard since the last epoch change. In fact these are not stales, this are rejected shares by the pool.
The reason for them to be flagged stale is because the CPU verify in the miner did approve them, but the pool rejected them.
As things stand this is NOT a miner issue - in fact it rather is one with some of the libraries widely used for ethash share verification. I am in contact with multiple pool ops to get this fixed for you.
Lolliedieb, on nicehash mining with epoch changes miner sometimes start to mine with 0 mh/s with no GPU use. And it's no 385+ epoch issue. Just after often epoch changes miner stops use GPU and mines with 0 mh/s. No errors, no stales... Just 0 speed...
|
|
|
For my RX 580 8Gb rigs Phoenix 5.1c didn't create DAG epoch №385. It creates DAG for 0,5 sec and all shares are incorrect. Speed shows normal.
I think PM just didn't support epochs 385+
Looks similar here, since estimated 6 hours almost all shares on ETC-Mining (Ethermine) are invalid. ETH seems to be working properly, still ... Doublecheck with NBMiner, no issues! Seems to be a problem with Phoenix only .... oh wait, NBMiner produce many (>20%) rejected shares at ETC-Mining currently ... I'm use lolMiner now. All fine. I had to switch to SRBminer and TeamredMiner (ETC). My 4 Vega 64 rig is mining ok now. PM give me only invalid shares. However, on my second rig ,with just one Vega 64, PM is still mining just fine even after reboot. It creates DAG properly. lolMiner for AMD gives more speed and pool aside speed, IMHO. Just try it.
|
|
|
For my RX 580 8Gb rigs Phoenix 5.1c didn't create DAG epoch №385. It creates DAG for 0,5 sec and all shares are incorrect. Speed shows normal.
I think PM just didn't support epochs 385+
Looks similar here, since estimated 6 hours almost all shares on ETC-Mining (Ethermine) are invalid. ETH seems to be working properly, still ... Doublecheck with NBMiner, no issues! Seems to be a problem with Phoenix only .... oh wait, NBMiner produce many (>20%) rejected shares at ETC-Mining currently ... I'm use lolMiner now. All fine.
|
|
|
For my RX 580 8Gb rigs Phoenix 5.1c didn't create DAG epoch №385. It creates DAG for 0,5 sec and all shares are incorrect. Speed shows normal.
I think PM just didn't support epochs 385+
|
|
|
i cant mine eth on lolminer "all versions" on hiveos every time i try to run lolminer with hiveos it says "--coin ethash is not supported / --coin etchash is not supported " can any one here help me ? You can do --coin ETC or --algo ETCHASH Not ETCHASH but ETHASH
|
|
|
Anyone know if this is any better than the OhGodAnETHlargementPill?
Don't use it, it's scam.
|
|
|
Hey man - Would you be so kind as to look into adding support for ProgPow-Epic , $EPIC = Epic Cash, 3 algo MW coin, 21mill supply, great little project With all the 4GB cards available, we need some decent work for them. Here is their GitLab link : https://gitlab.com/epiccashSRBminer already supports them RandomX\CPU, TTminer already support them on ProgPOW\nVidia thx in advance for anything you can do Phoenix miner is only for ethereum algos.
|
|
|
Hello there!
Help me, pls! I use version 1.11 of Linux with driver 20.10.
R9 390 ETH - 16 MH.... V. 1.11 --algo=ETHASH --pool %POOL% --user %WALLET_TPL% --pass x
On other miners (Phoenix 5.1) -everything is fine, 30 MH.
What should I do or what am I doing wrong? Do I need to add something to the command line for NiceHash? With respect.
No, for nicehash no additional parameters needed. I use: --algo ETHASH --pool %POOL% --user %WALLET_TPL% --pass x and all fine on 8Gb 580 cards. hi.. until now i cant mine ETH (ethash) on Nicehash, cos i get error setup. i used this line: lolMiner.exe --algo ETHASH -pool !POOL! -user !WALLET! --pass x --tls 0 "POOL=stratum+tcp://daggerhashimoto.jp-new.nicehash.com:3353" can you tell me how to fix it, please thanks Use POOL=daggerhashimoto.jp-new.nicehash.com:3353
|
|
|
Where is this clown phoenixminer developer? Last Active: August 07, 2020, 06:15:49 AM nice support!!! (( He spends money from devfee.
|
|
|
Does anyone check the above pill?
Yes. It's scam. Trojan in him.
|
|
|
some weirdness for you: In Windows device manager list GPU's didn't go in order of PCI bus number. They're in alphabetical order there.
|
|
|
AMD mem tweak is there! You just need to set the value to 30. Even though it states 20 is default I've found 30 works better according to some researching about it. What program on screenshot? AMD mem tweak looks different for me...
|
|
|
8x580 phoenix 238mhs, clay 243mhs why such difference? long time ago mined eth and phoenix was faster.
With Phoenix it's need to use AMD memory tweak tool to set REF parameter. Claymore can do this by -rxboost option. Phoenix not. Yet. Hope the developer will soon add this feature. I hope too. But dev several years didn't add this feature... Hope slowly dies...
|
|
|
2 days ago hashrate droped on my miner 10mh/each nvidia gpu. settings are the same . w 7 os any ideea?
Go to Win 10 pro I have a same problem and I have win 10 pro GPUs 1070 Any idea why do this? Use driver from the time the card was produced I have drivers 388.43 My rig working normally last 2 years. Last 3 months I have “big” problems with droped hasrate. 194,6 (hasrate last 2 years) now is 184,1 (last 3 months) IDK what going wrong Last 2 years there was many changes. And in mining too. DAG size all time growing, computing algorithms changes in drivers... Miners updates to work with new drivers, not older. Don't you think you need to try update your drivers before all?..
|
|
|
8x580 phoenix 238mhs, clay 243mhs why such difference? long time ago mined eth and phoenix was faster.
With Phoenix it's need to use AMD memory tweak tool to set REF parameter. Claymore can do this by -rxboost option. Phoenix not.
|
|
|
Hello! Every of my RX 580 8Gb drop in hashrate by ~3 Mh on epochs over ~380 on 5.1c. Windows, drivers 19.20. Is it considered normal?? And if yes, will it be fixed??
Windows 10, latest 20.10.1 drivers. Epochs #380 and #381 no hashdrops on my rx 580 8Gb cards with PM5.1c.
|
|
|
Hello there!
Help me, pls! I use version 1.11 of Linux with driver 20.10.
R9 390 ETH - 16 MH.... V. 1.11 --algo=ETHASH --pool %POOL% --user %WALLET_TPL% --pass x
On other miners (Phoenix 5.1) -everything is fine, 30 MH.
What should I do or what am I doing wrong? Do I need to add something to the command line for NiceHash? With respect.
No, for nicehash no additional parameters needed. I use: --algo ETHASH --pool %POOL% --user %WALLET_TPL% --pass x and all fine on 8Gb 580 cards.
|
|
|
Does Phoenixminer plan the same as the Lolminer? So mining will be possible with a reduced speed until February 2021? Btw, WHEN is ETC going to cut the DAG size? Is there any supposed date for this? Thanks!
TeamRed miner supports 4Gb extra mining too.
|
|
|
AMD released 20.10.1 drivers. Anyone tried already them with PM?
|
|
|
|