[$XVG] VERGE [POW][MultiAlgo][TOR/i2P][no premine/ico!]

[koYnsta]

Hi, I started to install the wallet 2.1.0.0 from scratch and I always run into sync-problems i.e. at block 316924 where it gets stuck. I restarted the wallet several times but no sucesss.
Any idea what to do?

[Dogedarkdev]

Hi, I started to install the wallet 2.1.0.0 from scratch and I always run into sync-problems i.e. at block 316924 where it gets stuck. I restarted the wallet several times but no sucesss.
Any idea what to do?

try adding connect=37.187.27.4 in your .conf file

[koYnsta]

Hi, I started to install the wallet 2.1.0.0 from scratch and I always run into sync-problems i.e. at block 316924 where it gets stuck. I restarted the wallet several times but no sucesss.
Any idea what to do?

try adding connect=37.187.27.4 in your .conf file

Thanks for your reply.
ah maybe that's the reason I have no .conf-file in \AppData\Roaming\VERGE...
what's the conf-filename? And what other parameters should be in that file?

[Dogedarkdev]

Hi, I started to install the wallet 2.1.0.0 from scratch and I always run into sync-problems i.e. at block 316924 where it gets stuck. I restarted the wallet several times but no sucesss.
Any idea what to do?

try adding connect=37.187.27.4 in your .conf file

Thanks for your reply.
ah maybe that's the reason I have no .conf-file in \AppData\Roaming\VERGE...
what's the conf-filename? And what other parameters should be in that file?

name it VERGE.conf

and that is all you need for a parameter, the connect line

[koYnsta]

Hi, I started to install the wallet 2.1.0.0 from scratch and I always run into sync-problems i.e. at block 316924 where it gets stuck. I restarted the wallet several times but no sucesss.
Any idea what to do?

try adding connect=37.187.27.4 in your .conf file

Thanks for your reply.
ah maybe that's the reason I have no .conf-file in \AppData\Roaming\VERGE...
what's the conf-filename? And what other parameters should be in that file?

name it VERGE.conf

and that is all you need for a parameter, the connect line

Hi, I created the .conf-file with the parameter and now there is no bar anymore with the downloading/sync-status at the bottom of the wallet.
Any idea why the bar is missing now? Is it still syncing?

[TheSignsGuy]

Hi, I started to install the wallet 2.1.0.0 from scratch and I always run into sync-problems i.e. at block 316924 where it gets stuck. I restarted the wallet several times but no sucesss.
Any idea what to do?

try adding connect=37.187.27.4 in your .conf file

Thanks for your reply.
ah maybe that's the reason I have no .conf-file in \AppData\Roaming\VERGE...
what's the conf-filename? And what other parameters should be in that file?

name it VERGE.conf

and that is all you need for a parameter, the connect line

Hi, I created the .conf-file with the parameter and now there is no bar anymore with the downloading/sync-status at the bottom of the wallet.
Any idea why the bar is missing now? Is it still syncing?

I can't give you much tech advice, but can share this:
If the bar is gone, it may be synced already.
You can go to help, click on debug window, and see what your current number of blocks are, check with a block explorer and see if you are current with them.
There is a little check mark to hover over in the lower right corner of the wallet, that may show the info also.

[Dogedarkdev]

Hi, I started to install the wallet 2.1.0.0 from scratch and I always run into sync-problems i.e. at block 316924 where it gets stuck. I restarted the wallet several times but no sucesss.
Any idea what to do?

try adding connect=37.187.27.4 in your .conf file

Thanks for your reply.
ah maybe that's the reason I have no .conf-file in \AppData\Roaming\VERGE...
what's the conf-filename? And what other parameters should be in that file?

name it VERGE.conf

and that is all you need for a parameter, the connect line

Hi, I created the .conf-file with the parameter and now there is no bar anymore with the downloading/sync-status at the bottom of the wallet.
Any idea why the bar is missing now? Is it still syncing?

i'd think so. you should only show one connection now that you added that line. keep it open and check on it later on..

[ljconstructionpa]

When will the android wallet be up its been months already i want to get my coins back

[koYnsta]

Hi, I started to install the wallet 2.1.0.0 from scratch and I always run into sync-problems i.e. at block 316924 where it gets stuck. I restarted the wallet several times but no sucesss.
Any idea what to do?

try adding connect=37.187.27.4 in your .conf file

Thanks for your reply.
ah maybe that's the reason I have no .conf-file in \AppData\Roaming\VERGE...
what's the conf-filename? And what other parameters should be in that file?

name it VERGE.conf

and that is all you need for a parameter, the connect line

Hi, I created the .conf-file with the parameter and now there is no bar anymore with the downloading/sync-status at the bottom of the wallet.
Any idea why the bar is missing now? Is it still syncing?

i'd think so. you should only show one connection now that you added that line. keep it open and check on it later on..

Hi, I got it finally synced thanks for your support.
It was like this:
wallet stopped syncing -> I activated verge.conf for a short time (with that I only got one connection which was always disconnected, connected, disconnected, connected, etc.) -> so I deactivated verge.conf again and it went on syncing until the next stop -> activated/deactivated verge.conf -> it went on syncing until the next stop...
and after having passed the blocks around 07th Mai it went smoothly.

[koYnsta]

I can't give you much tech advice, but can share this:
If the bar is gone, it may be synced already.
You can go to help, click on debug window, and see what your current number of blocks are, check with a block explorer and see if you are current with them.
There is a little check mark to hover over in the lower right corner of the wallet, that may show the info also.

well, wallet ballance was marked in red 'out of sync'.
But thanks for for your post by mentioning the debug window I learned about it
This was a helpful advice.

[altstar]

Hello everyone,

for days now I've been trying to synchronzing my Windows XVG wallet, but without success.
I read and applied some ideas of this thread, like:

1) using a VERGE.conf containing the line connect=37.187.27.4

2) using a VERGE.conf containing different lines with addnode=....

3) using the wallet without a VERGE.conf

4) alternating (1) thru (3) several times

5) I already deleted several times the whole blockchain (all files but wallet.dat)

Sometimes the synching goes on for a bit, then it gets stuck again. I left the wallet running several times over night, when I look at it in the morning, it's still stuck.

With no other wallet I've ever had so many problems.

I'm using wallet version 2.1.0.0-unk-beta.

Current number of blocks 353.312
Estimated total blocks 532.079

The green bar is there at 178.767 blocks remaining, but it's stuck again.

I love the Verge coin, but with these wallet problems, it's getting a bit irritating.

Does anyone have another idea what I might try to get this sorted?

Thanks a  lot
Kay

[Velgelm]

i copied my local blockchain:
if you have problems with connection or Blocksynced - extract this archive in yoyr %Appdata%\%Currentuser%\Loco
https://www.dropbox.com/s/1xozk5guxui1q8m/db%20%282%29.rar?dl=0
(to thank me can list a few xvg to this address :
DC7fHnmdrm55G9P8KkB929Pght5V3EZM4c)

[Beachguy]

Okay, next block reward reduction is coming in just over 70 million XVG.
That's only 2.85 BtC at this mornings's last sale at 4 sats.
Just a heads up as this coin supply is getting smaller and smaller. 

[Dogedarkdev]

Okay, next block reward reduction is coming in just over 70 million XVG.
That's only 2.85 BtC at this mornings's last sale at 4 sats.
Just a heads up as this coin supply is getting smaller and smaller. 

yep, 11k blocks til halving

[p75formula]

The supply is not getting smaller. Just the rate at which coins are produced.

[ttookk]

Hey,

are there coins out there, that take snapshots of their blockchain and then delete its history as a means to save storage? I mean, if you look at Bitcoin, it has one blockchain with all the transactions since its beginning, but you wouldn't need that much information to make the system work. Could you just pick a point in time at which all miners check the blockchain for relevant information(i.e. used addresses, their balance, etc.) and delete the unnecessary stuff (mostly transaction data), then check whether all their snapshots look the same? This might decrease the size of the blockchain considerably, wouldn't it?

[g0ldm0ney10]

Okay, next block reward reduction is coming in just over 70 million XVG.
That's only 2.85 BtC at this mornings's last sale at 4 sats.
Just a heads up as this coin supply is getting smaller and smaller.  

yep, 11k blocks til halving

Yeah but not sure what this will do as the last halving the price dropped.  With not many people even knowing about Verge, I really don't see any changes coming with the halving.  It looks as though the 4 sat wall support has gone away and 3's and 2's could be coming soon.  There just doesn't seem to be any interest as volume has been dry for months now.

[Dogedarkdev]

Okay, next block reward reduction is coming in just over 70 million XVG.
That's only 2.85 BtC at this mornings's last sale at 4 sats.
Just a heads up as this coin supply is getting smaller and smaller.  

yep, 11k blocks til halving

Yeah but not sure what this will do as the last halving the price dropped.  With not many people even knowing about Verge, I really don't see any changes coming with the halving.  It looks as though the 4 sat wall support has gone away and 3's and 2's could be coming soon.  There just doesn't seem to be any interest as volume has been dry for months now.

that's cool you are giving your unprofessional opinion on the affect of the halving on price, but it's not needed here. you can do that in the price speculation thread, thanks.

[p75formula]

I've said it before but I'll say it again, if you expect the price to rise just because of a halving you don't understand crypto. Don't come to this thread to whine about it, it makes you look inexperienced. Just sell and let the adults play.

[g0ldm0ney10]

I've said it before but I'll say it again, if you expect the price to rise just because of a halving you don't understand crypto. Don't come to this thread to whine about it, it makes you look inexperienced. Just sell and let the adults play.

I can't sell as I am a top holder and at these prices I lose...and I can't do that!!   I am saying the exact same thing you are, don't expect the price to rise just because of halving....that is what I was saying as others are saying (yeah!!!  halving, price is going to rise)  I was just letting them know not to expect that!!