Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Claymore]

Somebody to explain me how grabing information from miner works ?

http://ip:3333 give me few json and miner output.
But how get full miner info in json format ? Is it possible ?

Thanks

Added to FAQ:

- How can I get stats from miner as EthMan does?
  Start EthMan and catch its tcp/ip data with WireShark, you will see json protocol details.

[CoRpO]

I have trouble with the remote manager(ethman.exe). It allow me to view static on the computer I turn on the program but not other computer in my LAN (through web browser and the android app won't work either). I already allowed the program on windows 10 firewall both private and public but it doesn't work. However, when I turn off the firewall, it works fine. Anyone know how to add exception to the program without turn off the firewall ?

Did you allow the tcp port 3333 ? It's a better way to proceed IMHO

Just curious, the HTTP port open at 8000, why allow 3333? Anyway, I tried and not work as well.

Add: I ran on some researching and found out that the HTTP port at 8000 already used by another program. I changed to higher port and it works like charm. Thank you for responding ^^

I didn't understand that your were willing to access ethman http server, sorry

[74K50N]

whats the best altcoin to dual mine ? i mine ether and sia with amd rigs.

[fredeq]

whats the best altcoin to dual mine ? i mine ether and sia with amd rigs.

If you do not welcome the extra heat I would actually mine solo.

Personally I choose decred, but many people prefer sia...
DCR - small heat addition, small revenue addition
SIA - moderate heat addition, moderate revenue addition (I dont like the increased power here)
LBC - small heat addition, moderate revenue addition, reduced ETH hashrate (I dont like the reduced hashrate here)

[Ale-x]

Why only one is interested in higher hashrates with Claymore's miner? And personally the author hasn't interested in this case?
The miner is realy sends more shares to pool, even for both coin - ETH & SIA, and pools accepted it. There were no HW errors. Clocks are the same.

R9 270 - 15-16 MH/s
7950/7970 about 22 MH/s

[WhyMe]

Somebody to explain me how grabing information from miner works ?

http://ip:3333 give me few json and miner output.
But how get full miner info in json format ? Is it possible ?

Thanks

Added to FAQ:

- How can I get stats from miner as EthMan does?
  Start EthMan and catch its tcp/ip data with WireShark, you will see json protocol details.

Finally found miner_getstat1 call.

[hacko.bg]

Why only one is interested in higher hashrates with Claymore's miner? And personally the author hasn't interested in this case?
The miner is realy sends more shares to pool, even for both coin - ETH & SIA, and pools accepted it. There were no HW errors. Clocks are the same.

R9 270 - 15-16 MH/s
7950/7970 about 22 MH/s

Of course everybody is interested. But I'll indulge you and ask "How"?

[fredeq]

Why only one is interested in higher hashrates with Claymore's miner? And personally the author hasn't interested in this case?
The miner is realy sends more shares to pool, even for both coin - ETH & SIA, and pools accepted it. There were no HW errors. Clocks are the same.

R9 270 - 15-16 MH/s
7950/7970 about 22 MH/s

7970 / 280x does 16Mh/s on ETH now

[Ale-x]

7970 / 280x does 16Mh/s on ETH now

In fact of the matter, Claymore's miner can mine at 22 Mh/s now on 7950/70.
Much earlier I've written analogously post but even Claymore did not notice it.
But it's repeated again and again. And not only for ETH it has higher hashrate for SIA.

It's 6x7950 rig today:
http://i66.tinypic.com/bhg4dh.jpg

Here is log for R9 270 Rig was working at 6x15.7 Mh/s:
http://www.filedropper.com/logrigr9270

I'm asking Claymore to check it.

[adaseb]

7970 / 280x does 16Mh/s on ETH now

In fact of the matter, Claymore's miner can mine at 22 Mh/s now on 7950/70.
Earlier I've written analogously post but even Claymore did not notice it.
But it's repeated again and again. And not only for ETH it has higher hashrate for SIA.

It's 6x7950 rig today:

You aren't mining ETH you are mining EXP or some other Dagger Algo coin. Something rented hash on Nicehash and pointed it towards that coin.

7950 on stock get 16MH/s

[z0n0]

7970 / 280x does 16Mh/s on ETH now

In fact of the matter, Claymore's miner can mine at 22 Mh/s now on 7950/70.
Much earlier I've written analogously post but even Claymore did not notice it.
But it's repeated again and again. And not only for ETH it has higher hashrate for SIA.

It's 6x7950 rig today:


Here is log for R9 270 Rig was working at 6x15.7 Mh/s:
http://www.filedropper.com/logrigr9270

I'm asking Claymore to check it.

OK Alex...so, wanna share some secrets on that, or you're here just to brag about your hash?

[Ale-x]

Ok, what about SIA coin? Why the hashrates higher too?
Earlier it happened on DwarfPool. I'll find my old post.

[fredeq]

Ok, what about SIA coin? Why the hashrates higher too?
Earlier it happened on DwarfPool. I'll find my old post.

adaseb is correct, someone just pointed to lower epoch coin from nicehash... sia is probably higher from reduced memory usage
Waiting for that dwarfpool pic then

[scryptr]

Ok, what about SIA coin? Why the hashrates higher too?
Earlier it happened on DwarfPool. I'll find my old post.

adaseb is correct, someone just pointed to lower epoch coin from nicehash... sia is probably higher from reduced memory usage
Waiting for that dwarfpool pic then

YOU ARE MINING A LOWER EPOCH ETHEREUM CLONE COIN--

Mining with a 280X on Expanse (EXP) will generate 24-25MH/s per card the last time I checked.  The EXP coin was at Epoch 13 when I mined it; Ethereum (ETH) is at Epoch 83, has a larger DAG, and a higher network difficulty.  NiceHash does not mine pure ETH, it is a rental service, and your rig can be pointed at any coin that uses the Dagger-Hashimoto algorithm.       --scryptr

[adaseb]

Yes that's why I stopped using Nicehash because if you got undervolted GPUs, then if someone mines EXP or SHIFT or whatever else Daggercoin the rigs crash because they use a little more power at the lower epoch levels.


The most you will get with the 7950/7970/280x is 17.5MH/s currently! Unless you overclock like crazy.

[igotek]

Only ETH mode gives 32.8 Mh/s for overclocked R9 390X.
ETH + DCR mode gives 30.1 Mh/s ETH + 440 Mh/s DCR  for the same graphic card.

As I see in your readme file, I will get higher hashrate if I use dual mode. But it s not. Is it possible ?

Reduce your -dcri to 1 for claymore's miner ( for 440MH in DCR it must be around 30 currently) and you will see your cards max ETH hash rate which should be around 34 Mh/s. Then increase dcri steadily till you start losing ETH hash rate, find the optimum balance point where you get almost your max ETH hash but also significant DCR. This point should be between -dcri 16 to 24.

I did it the way you told.

Only ETH mode gives 32.8 Mh/s for overclocked R9 390X.
ETH 32.1 Mh/s - DCR 16.1Mh/s (-dcoin dcr -dcri 1)

[igotek]

where can I download claymore's ethereum dual miner manager ?

[scryptr]

where can I download claymore's ethereum dual miner manager ?

IT IS INCLUDED IN THE COMPRESSED ARCHIVE--

You should already have it, if you downloaded the archive provided by Claymore.  It is in a subdirectory called "Remote manager" within the official archive.       --scryptr

[igotek]

it is so good
Remotely check

[igotek]

where can I download claymore's ethereum dual miner manager ?

IT IS INCLUDED IN THE COMPRESSED ARCHIVE--

You should already have it, if you downloaded the archive provided by Claymore.  It is in a subdirectory called "Remote manager" within the official archive.       --scryptr

How could I set some setting in config ?? I can set only pools.


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100