Ratledge
Jr. Member
Offline
Activity: 84
Merit: 1
|
|
January 30, 2018, 09:55:04 PM |
|
Dual mining DCR at suprnova was causing my rig to reboot recently as the connection kept dropping, had to be pool related. So I switched to coinmine.pl - working great again - well, except for the fact that difficulty rise is making DCR impossible to actually mine on one rig, but unrelated...
I’m mining DCR in coinmine.pl too, and I noticed the same thing... the difficulty is making mine DCR impossible. So, the question is... there are another coin that I worth mine than DCR, as second coin? I tried Sia, but I didn’t like the results. If you look back a couple of pages, you'll find a comment by Claymore indicating that he knows "Dual is Dead" for now due to the new ASICs and that he is working on another algo that he expects to be twice as powerful as existing "solutions" for that coin (he doesn't say which one, but I suspect we will know soon, maybe with 10.7 release?). I'm just speculating, of course. Those of you who haven't properly tuned your systems can keep doing what I have been doing with my spare time lately and my original miner MH/s rate is up 26.98% over what I was doing a week ago. I thought I had tried everything as far as overclocking, mods and volt hacking, but apparently not. I started with 18.9MH/s and now I am running just over 24MH/s - now that's worth doing! It seems that my Samsung RAM is more capable than I thought given proper specs. I suppose that I know what I'm doing, since this is out of the stock HP nVidia 1060 3GB card I had in my rig before I built a true mining rig. When you see your effective MH/s go over 30 for the first time, you know that you are truly winning the silicon lottery, as I have heard stated before - especially for this plain jane / vanilla GPU.
|
|
|
|
charles1510
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 30, 2018, 09:58:50 PM |
|
I'm writing python script to check whether pc is running on UPS or not and based on that, control GPUs mining(to extend time running on battery). I've found a small bug in Remote Management API documentation: {"id":0,"jsonrpc":"2.0","method":"control_gpu", "params":[0, 1]} Should be: {"id":0,"jsonrpc":"2.0","method":"control_gpu", "params":["0", "1"]}
|
|
|
|
thenewguy_intown
Newbie
Offline
Activity: 35
Merit: 0
|
|
January 31, 2018, 03:58:24 AM |
|
one small question,
If I mine eth+dcr using 2 different pools (nanopool for eth + dcr coinmine) then how much fee will be charged by each pool and dev fee? is it 1% for each pool and 2 % dev ? total 4% Is it better to mine only eth if fee is compared ? here only 1% pool fee and 1% dev total 2%
If the calculations are correct?
|
|
|
|
Vann
|
|
January 31, 2018, 04:06:26 AM Last edit: January 31, 2018, 04:16:43 AM by Vann |
|
The Devfee is 2% of your ETH earnings in dual mining mode and 1% in ETH only mode, based on mining towards the built in Dev wallet for a period of time to collect the fee. The pool fee is based on the structure for whatever pool you mine and it is collected from your earings on that pool. In addition to the pool percentage for mining, most pools also charge a transaction fee for withdrawls.
|
|
|
|
xxoanser
Newbie
Offline
Activity: 16
Merit: 0
|
|
January 31, 2018, 05:57:18 AM |
|
What is the max -ethi value?
|
|
|
|
uranus13
Newbie
Offline
Activity: 9
Merit: 0
|
|
January 31, 2018, 06:39:43 AM Last edit: January 31, 2018, 06:54:21 AM by uranus13 |
|
I'm always get error with devfee, my rigs hang out and restart Feeling tired
|
|
|
|
walter281
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 31, 2018, 11:16:45 AM |
|
is there any possibility to have ethman under linux ?
|
|
|
|
OCB2.0
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 31, 2018, 11:30:10 AM |
|
Hi everybody, first, sry for my bad english writing.
i have a mining rig, my components:
4x gigabyte rx 570 4g 2 of them with 1140 2030 and 2 with 1140 2050 @ 850mv the rig works very well, i got 114 MH/s "28.5" eth 540w from the wall i use 2 600w powersupplys, an celeron cpu and a gigabyte mainboard with 4gb ram. my os is win10 pro an it is setup for mining.
yesterday i install the new claymore miner, the description tells me i can dual mine without a hashratedrop @ eth. i try this with eth+dcr, but wenn i start mining my eth hashrate drops zu 17MH/s
has anyone try this or a idea?
|
|
|
|
thenewguy_intown
Newbie
Offline
Activity: 35
Merit: 0
|
|
January 31, 2018, 11:33:45 AM |
|
The Devfee is 2% of your ETH earnings in dual mining mode and 1% in ETH only mode, based on mining towards the built in Dev wallet for a period of time to collect the fee. The pool fee is based on the structure for whatever pool you mine and it is collected from your earings on that pool. In addition to the pool percentage for mining, most pools also charge a transaction fee for withdrawls.
I understand this But if use 2 different site pools for dual mining or use 1 site pool for dual mining , both are equal or i.e. 1% for eth pool and 1% for dcr/sia/other pool (apart from dev fee) ?? or if I dual mine using lets say same pool e.g. nanopool ETH+SIA then will I pay less pool fee i.e. only 1 time 1% ?? My current config i..e using nanopool for eth and coinmine for dcr ... EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal wallet.2/xyz@xyz.com -epsw x -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal wallet.1 -dpsw x -allpools 1 -asm 2 -dcri 15 -ftime 10
|
|
|
|
thenewguy_intown
Newbie
Offline
Activity: 35
Merit: 0
|
|
January 31, 2018, 11:35:19 AM |
|
Hi everybody, first, sry for my bad english writing.
i have a mining rig, my components:
4x gigabyte rx 570 4g 2 of them with 1140 2030 and 2 with 1140 2050 @ 850mv the rig works very well, i got 114 MH/s "28.5" eth 540w from the wall i use 2 600w powersupplys, an celeron cpu and a gigabyte mainboard with 4gb ram. my os is win10 pro an it is setup for mining.
yesterday i install the new claymore miner, the description tells me i can dual mine without a hashratedrop @ eth. i try this with eth+dcr, but wenn i start mining my eth hashrate drops zu 17MH/s
has anyone try this or a idea?
==> add option in your claymore config " -dcri 15 " adjust it accordingly ... decrease or increase ...
|
|
|
|
OCB2.0
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 31, 2018, 01:15:13 PM Last edit: January 31, 2018, 01:27:55 PM by OCB2.0 |
|
thx for your help!!! with -dcri 15 i get 71MH eth, with -dcri 5 i geht 77MH eth. with -dcri 70 i get 40MH eht, do you know whats going wrong? i find the issue, the power offset
|
|
|
|
aizzaku
Legendary
Offline
Activity: 1146
Merit: 1006
|
|
January 31, 2018, 03:29:22 PM Last edit: January 31, 2018, 03:42:57 PM by aizzaku |
|
thx for your help!!! with -dcri 15 i get 71MH eth, with -dcri 5 i geht 77MH eth. with -dcri 70 i get 40MH eht, do you know whats going wrong? i find the issue, the power offset Hey as you can read in the readme.txt the param -drci is for in simple words adjusting your gpu to hash the other algo for dual mining. so the lower the better towards ethhash and higher will increase MH/s on sia/dcr/ etc. But not necessarily fastest at 1. try adjusting or fine tuning it slowly with -/+ key while mining there is nothing wrong. its just a matter or preference according to profitability. at this moment i strongly advice dual mining is not profitable due to the asics. I have stopped and putting all my card too eth only mining.
|
|
|
|
Tandro
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 31, 2018, 03:46:14 PM |
|
hello,
i have a problem with my rig.
hardware 1x msi z270 pc mate 1x crosair rm1000x 1000w 1x be quiet power10 800w 2x gigabyte aorus rx570 1x gigabyte gaming rx570 3x asus rog-strix rx570 o4g
i did not change the card bios!! later
software ubuntu 16.04 server clayminer version 10.3, 10.4 and now 10.6 amdgpu driver 17.50
sometimes the miner run 1-2 hours, then at the next reboot only 5 minutes.
everytime gpu 4, 5 or all hangs in opencl call i only install rocm
when all is running the miner find every minute 2 shares.
this is my miner config:
-epool eu1.ethermine.org:4444 -ewal xxxxxxxxxx.dddd
-esm 0 -etha 0 -asm 2 -ethi 8 -eres 3 -gser 5 -mode 1 -ftime 1 -wd 1 -r 1 -minspeed 100 -logfile ethmining_log.txt -logsmaxsize 10
-li 0 -lidag 1
-platform 1 -dcri 85
thanks
tandro
|
|
|
|
RYXES
Member
Offline
Activity: 140
Merit: 10
Merit me or don't.
|
|
January 31, 2018, 03:49:00 PM |
|
hello,
i have a problem with my rig.
hardware 1x msi z270 pc mate 1x crosair rm1000x 1000w 1x be quiet power10 800w 2x gigabyte aorus rx570 1x gigabyte gaming rx570 3x asus rog-strix rx570 o4g
software ubuntu 16.04 server clayminer version 10.3, 10.4 and now 10.6 amdgpu driver 17.50
sometimes the miner run 1-2 hours, then at the next reboot only 5 minutes.
everytime gpu 4, 5 or all hangs.
when all is running the miner find every minute 2 shares.
this is my miner config:
-epool eu1.ethermine.org:4444 -ewal xxxxxxxxxx.dddd
-esm 0 -etha 0 -asm 2 -ethi 8 -eres 3 -gser 5 -mode 1 -ftime 1 -wd 1 -r 1 -minspeed 100 -logfile ethmining_log.txt -logsmaxsize 10
-li 0 -lidag 1
-platform 1 -dcri 85
thanks
tandro
5 GPU's at 1000w? Probably need more power. Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too.
|
Merit me or don't.
|
|
|
Tandro
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 31, 2018, 03:59:04 PM |
|
hello,
hardware 1x msi z270 pc mate 1x crosair rm1000x 1000w 1x be quiet power10 800w <--- = 1800w 2x gigabyte aorus rx570 1x gigabyte gaming rx570 3x asus rog-strix rx570 o4g
software ubuntu 16.04 server clayminer version 10.3, 10.4 and now 10.6 amdgpu driver 17.50
5 GPU's at 1000w? Probably need more power. Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too. i write 1000w + 800w ok i have 4gb ram and an linux swap file 50gb but the swap memory is unsued top - 17:01:54 up 13 min, 2 users, load average: 19,32, 14,75, 7,74 KiB Spch : 3917868 gesamt, 3234100 frei, 388276 belegt, 295492 Puff/Cache KiB Swap: 58631164 gesamt, 58631164 frei, 0 belegt. 3270196 verfü Spch
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
January 31, 2018, 04:40:25 PM |
|
UPDATE: I'm working on two new algorithms for dual, new version will be available in about a week, also I will reduce devfee for dual mode.
|
|
|
|
Bael
Jr. Member
Offline
Activity: 87
Merit: 2
|
|
January 31, 2018, 05:00:20 PM |
|
UPDATE: I'm working on two new algorithms for dual, new version will be available in about a week, also I will reduce devfee for dual mode.
good news!!
|
|
|
|
charles1510
Newbie
Offline
Activity: 2
Merit: 0
|
|
January 31, 2018, 05:15:27 PM |
|
is there any possibility to have ethman under linux ?
Have you tried run it under Wine? What do you need from it? Using API is pretty easy if you know some basic programming. I can rewrite ethman for Linux in c++ or python but I need source code. Now I'm working on my own multiplatform solution for remote control, and probably share it when it's "not crappy" enough.
|
|
|
|
xeridea
|
|
January 31, 2018, 05:58:13 PM |
|
5 GPU's at 1000w? Probably need more power. Check your RAM? 4gb min and add virtual ram to include 16gb or your hard rive too.
1000W is plenty for 5 GPUs Eth only. with undervolt, 6 GPUs takes ~730W at the wall, so perhaps ~670W of PSU output. You could feasibly run 7 if there were enough connectors. Dual mining different story, 1200-1300W PSU would be recommended.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
nmullen559
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 31, 2018, 06:07:05 PM |
|
Hello and thank you for your time. I am pretty new to mining so please bare with me! I just started mining ethereum on simplemining using claymore v10.6. I'm currently running 4 - 1080ti's and 5- 1050ti's on the Asus mining expert b250 mobo with 8gb of ddr4 ram with an Intel Pentium G4400 Dual-core (2 Core) 3.30 GHz Processor. I am trying to just mine ethereum and not dual mine and I am donating but I'm noticing I'm getting about 5% lower MH/s speed then I'm supposed to be getting. I am getting about 198 MH/s and the average for my cards looks to be about 210 MH/s. Any help or info would be greatly appreciated!! Current SMOS Config- -epool us1.ethermine.org:4444 -ewal 0x7c17825D0879cd436f58d6E1EcfDe510ED793Da9 -epsw x Also, Should I be dual mining? Just not sure how to write the Config text for SMOS with dual mining. Thanks a ton!!!! Nick Mullen
|
|
|
|
|