Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[muzuca]

If we ignore the nlpool shills, it seems like antminepool and ahashpool are the only good pools that don't steal your earnings. Unimining took like half of the expected rewards, zpool is 20-30% lower, nlpool doesn't have enough hashpower to do shit, other pools are too small as well.

I was using unimining , but the reward drops a Lot..  what are you using know?

[miner582]

YES - Mine with NLPOOL
KOREPOOL - switch all to NLPOOL.
too much of small pools.

We need 2-5 TH, and then we have 1-2 blocks per hour, which is quite ok.

I just put 40 GH on nlpool. Works fine, i could suggest to start with higher diff - at least 10 or so.
Cause in the beggining there was a flood of shares ;-)

now the diff adjusted and is beetween 35 and 56.

What we need now is more hashpower so we can catch some blocks.

I did swap 2 RIGs on nlpool and I will swap 5 more.
If works decent, I will add 11 more RIGS.

Let's see.

i mining in NLPOOL 12 hours and my balance 0.00000 i think its scam
 and the miners continue to leave NLPOOL

False I am mining on nlpool for 24 hours without any problem, dont scam

[fluxy12]

YES - Mine with NLPOOL
KOREPOOL - switch all to NLPOOL.
too much of small pools.

We need 2-5 TH, and then we have 1-2 blocks per hour, which is quite ok.

I just put 40 GH on nlpool. Works fine, i could suggest to start with higher diff - at least 10 or so.
Cause in the beggining there was a flood of shares ;-)

now the diff adjusted and is beetween 35 and 56.

What we need now is more hashpower so we can catch some blocks.

I did swap 2 RIGs on nlpool and I will swap 5 more.
If works decent, I will add 11 more RIGS.

Let's see.

i mining in NLPOOL 12 hours and my balance 0.00000 i think its scam
 and the miners continue to leave NLPOOL

False I am mining on nlpool for 24 hours without any problem, dont scam

Hello, i just wanted to say thanks to NLpool, it is the first pool i try that doesn't scam xvg, i've done more xvg in a few hours than unimining and ahashpool in a day.

Please go to long term and don't try to scam like other pools also think to do a little fee, i prefer to pay than to be scammed.

And thanks to claymore for make mining very interresting again.

[miner582]

There's no good pool for XVG? Unimining gives about 40% of what it should give...EVEN IF Whattomine is not full accurate, the diference is too Huge...With 4600MH/s im getting only 12, 13 coins/day.

Antminepool doesnt work here on the last 5 or 6 days...instant disconnect on both ports.

You can use NLpool.nl now ... working and fast.

The address for XVG VERGE - Blake2s is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XVG

The address for Shield Blake2S is:
stratum+tcp://mine.nlpool.nl:5766 -u <WALLET_ADDRESS> -p c=XSH

If you have any questions or other coins you want added to the pool please e-mail us. The e-mail address is displayed on our website nlpool.nl

Example .bat :

EthDcrMiner64.exe -epool us2.ethermine.org:14444 -ewal <YOURETHADDRESS> -epsw x -gser 1 -lidag 1 -r 1 -dcri 40 -cclock 1150 -mclock 2125 -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal <YourVergeAddress> -dcoin blake2s -dpsw c=XVG

mine_phun keep you good work, apply some fees to your pool, nothing is free. Claymore thanks for keeping devs on your miner.

[Amstellodamois]

Is there a topic benchmarking blake2s and keccak for the RX 580?

[Ratledge]

Guys!  Please think about what you are posting: we don't need to see the entire "README!!.txt" file or half of your logfile posted here - and if we do need your logfile to figure something out for you - we'll ask.  Jeezus, people!

I run a web-based forums site myself, so I know that it's tempting and easy to just not consider everybody else, but it's truly a waste of time for people like Claymore who read (or at least try) through this whole thing three of four times a day!

Sorry, I'll get off my soapbox, now...

[ysakay]

Is there a topic benchmarking blake2s and keccak for the RX 580?

I have Spec edition 580

at dcri 50 30.5 Eth + 1.500 xvg with same power DCR mining.

I write here my bat file. Edit your wallet, mail etc.

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal "ETH WALLET" -cvddc 900 -mvddc 900 -cclock 1133,,1200,1200,1200,1200 -mclock 2100,2200,2200,2200,2200 -tt 65 -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal "XVG WALLET" -dcoin blake2s -dpsw c=XVGB -dcri 40,50,50,50,50

[saltypotato]

Old lurker turned new user here.
Care to share your stable power for dual mining ETH & XVG on rx580?
I'm using 875 cvddc/mvddc. Is this too low?

I have some 580 nitro and they are very stable using 850 voltage. Just the GPU0 I need to put 900 to work well.

Stable for days at 31 Mh/s ETH & 1235 Mh/s XVG per RX 580 Gaming X 8G at 50c, ~40% fan.

-cvddc 950
-cclock 1250
-mvddc 925
-mclock 2225
-dcri 40

[Ratledge]

Is there a topic benchmarking blake2s and keccak for the RX 580?

I have Spec edition 580

at dcri 50 30.5 Eth + 1.500 xvg with same power DCR mining.

I write here my bat file. Edit your wallet, mail etc.

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal "ETH WALLET" -cvddc 900 -mvddc 900 -cclock 1133,,1200,1200,1200,1200 -mclock 2100,2200,2200,2200,2200 -tt 65 -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal "XVG WALLET" -dcoin blake2s -dpsw c=XVGB -dcri 40,50,50,50,50

My 'sweet spot' appears to be about -dcri 50, also.  I haven't really screwed around with it too much yet, but I started at 25 and adjusted it over the first few hours when I moved my 2nd coin over to NLpool.nl after leaving it in single mining mode a few days after 11.0 was posted.

My cards are GTX1060/1080 and RX 580's, all with 8GB except the 1060 = 6.

Not advertising here, but I am getting VERY good results using NLpool.nl's BLAKE2S pool, and haven't tried anything beyond that with 11.0 version.  I had been single mininng for a while after I realized that all of the previous coins had been eat up by ASICs coming out (sounds right - "A-sicks").

Setup was truly easy, quick and couldn't be simpler.

[cirlama]

Is there a topic benchmarking blake2s and keccak for the RX 580?

I have Spec edition 580

at dcri 50 30.5 Eth + 1.500 xvg with same power DCR mining.

I write here my bat file. Edit your wallet, mail etc.

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal "ETH WALLET" -cvddc 900 -mvddc 900 -cclock 1133,,1200,1200,1200,1200 -mclock 2100,2200,2200,2200,2200 -tt 65 -epsw x -dpool stratum+tcp://mine.nlpool.nl:5766 -dwal "XVG WALLET" -dcoin blake2s -dpsw c=XVGB -dcri 40,50,50,50,50

My 'sweet spot' appears to be about -dcri 50, also.  I haven't really screwed around with it too much yet, but I started at 25 and adjusted it over the first few hours when I moved my 2nd coin over to NLpool.nl after leaving it in single mining mode a few days after 11.0 was posted.

Not advertising here, but I am getting VERY good results using NLpool.nl's BLAKE2S pool, and haven't tried anything beyond that with 11.0 version.  I had been single mininng for a while after I realized that all of the previous coins had been eat up by ASICs coming out (sounds right - "A-sicks").

Setup was truly easy, quick and couldn't be simpler.

Increasing dcri from 50 to somewhere in between 60 and 70 increase XVG without decreasing ETH for me
(rx 580 1300 core, 2250 mem, 0.95 v core)

[Ratledge]

My 'sweet spot' appears to be about -dcri 50, also.  I haven't really screwed around with it too much yet, but I started at 25 and adjusted it over the first few hours when I moved my 2nd coin over to NLpool.nl after leaving it in single mining mode a few days after 11.0 was posted.

Not advertising here, but I am getting VERY good results using NLpool.nl's BLAKE2S pool, and haven't tried anything beyond that with 11.0 version.  I had been single mininng for a while after I realized that all of the previous coins had been eat up by ASICs coming out (sounds right - "A-sicks").

Setup was truly easy, quick and couldn't be simpler.

Increasing dcri from 50 to somewhere in between 60 and 70 increase XVG without decreasing ETH for me
(rx 580 1300 core, 2250 mem, 0.95 v core)

Yep, probably universal.  I am just playing with my single 1060/6GB card ATM, but using -dcri 70 and I don't see any difference to speak of.  I'll keep my eyes on the number of shares and compare it to the previous week or two single mining to be certain, but I am getting around 25x the hash rate for BLAKE2S compared to ETH - without really changing my overall MH/sec rate for Ethereum.

[Amstellodamois]

Seems there's a consensus that for an RX 580, BLAKE2S for Verge at dcri 50+ is the way to go?

[Ratledge]

Seems there's a consensus that for an RX 580, BLAKE2S for Verge at dcri 50+ is the way to go?

That seems to be a winning combination regardless of the GPU engine you're using.  I have my two RX 580's single mining, for now, but I'll add them to the NLpool here within the next day or two when I have a little spare time.  Maybe closer to -dcri 70 for some cards, but I am seeing a little decrease in ETH speed, so I went back to 60 to see how it rides.

Right now I am monitoring a new Kickstarter that we launched at noon here (NYC time) for playing cards ("DeNovo" / UC2018 decks).

[MekMekPL]

Hey guyS!

it's 24h since i switched to nlpool.nl for blake2s.

THIS IS much better than ahash, and DEFINATELY than unimining!

i got 470 XVG from 30 amd RX GPUs (40-42 GH)! The pool is big now almost 9 TH!

On unimining i got 360 IN 2.5 DAYS!!!!!!! THAT JUST PLAIN THEFT!

HAIL to nlpool ;-)

[shadabahmed]

RX 470 4GB only getting 17 mhs

few month ago my cards gave me 27 mhs tried many drivers still no luck

[fluxy12]

Hey guyS!

it's 24h since i switched to nlpool.nl for blake2s.

THIS IS much better than ahash, and DEFINATELY than unimining!

i got 470 XVG from 30 amd RX GPUs (40-42 GH)! The pool is big now almost 9 TH!

On unimining i got 360 IN 2.5 DAYS!!!!!!! THAT JUST PLAIN THEFT!

HAIL to nlpool ;-)

This.

I'm so disgusted by this guys on this pools who just think to steal people, that's not a good idea they will loose a lot of hashrate in the coming hours. bad rep is coming.

[skablast]

This configuration  was fun because I  just wrote my lucky number in there 5 minutes saying let it run safe, all the card same set for a while  and than I will optimize better later
but
Stable for days at 31 Mh/s ETH & 1550 Mh/s XVG per RX 580 PULSE X 8G at 50c, ~20% fan.

-cvddc 848
-cclock 1148
-mvddc 848
-mclock 1988
-dcri 48

Power draw 55 GPU 37 Memory ( Gpu Z)
At the wall its 14 % less than DCR
RX 570 pulse is a different story, Dcri is 34 with speed 30,3 around 1044 844 2092 944,  fan at 50 %, power draw GPU 70 but each of them have required time to test

To the guy that have trouble with the configuratio and wrote before:

One reason of instability is because you mix 570 & 580 in the same rig BUT you use only one -DCRi value.

but the peak of 570 and 580 are 10/12 apart

Last To be fair with NLpool, that I declare a little bit too pushy in this discussion around yesterday , I ended up testing  them,   they are (by far) better  for me of Zpool/unimining, I will test now the Ahashpool that someone mention and settle somewhere.

Anyway  NLpool guy, please take your buddies here and go to drink some beer and let the discussion quiet

[MekMekPL]

ahaspool is not good - cause you can just set the algo - blake2s.

But the ahash send you diffrent coin work - not only XVG, sometimes TAJ, soetimes neva... but this coin is worthless. They should send the work that is most profitable but when they switch to those coins my BTC earn indicator went flat.. instead of rise.

That's the problem, i not accusse of steal.

I used to mine with algo switching on ahashpool was ok, but no when zec / eth i back in game makes no sense (and the stability wasnt so good, with 300+ gpu's i need stability)

[EthereumPY]

ahash pool total ripoff in don't recommend it!!

pointed ~250ghs there for 4 hours

Bitcoin
(pending clearing)   0.00078446         0.00078446 BTC

sent an email to their support regarding why its mining other blake2s coins instead XVG got this response

Please read and learn what our pool do and does not do first.  You don't seem to know what you are doing at all.

jumping out and testing nlpool now will update here soon

[kakoluckiam]

i'm the only one noticing a 20-40% drop in antmine rewards?
Have been fine until this morning, i started receive less XVG every block, while the found blocks didn't increase.
Guess going to switch to nlpool and give it a try with some rigs..