under2020
Newbie
Offline
Activity: 4
Merit: 0
|
|
August 20, 2020, 05:53:07 PM Last edit: August 20, 2020, 07:28:17 PM by under2020 |
|
Thanks for information BUT.....after a few hours of install and uninstall drivers and so on... still NOTHING. I use DDU and remove all drivers, after that i installed AMD display driver 19.5.2 but only display drivers. After reboot i try again miners but still 9,2 MH/s Tried to press "y" in miners and enabled compute mode. Reboot pc and still the same hashrate. I tried to use other software to enable compute mode and after restar - still 9,2 MH/s. Is there need to install all amd display driver package (software and so on)? Also is there someone who mining ETH in WINDOWS 7?How to unlock all potential speed of my gpu under win 7? EDIT: maybe I must tell that my pc is with older GTX 970 4GB as primary gpu and the new gpu RX570 is as second gpu on my MB.
|
|
|
|
br2459
|
|
August 20, 2020, 08:17:08 PM |
|
Thanks for information BUT.....after a few hours of install and uninstall drivers and so on... still NOTHING. I use DDU and remove all drivers, after that i installed AMD display driver 19.5.2 but only display drivers. After reboot i try again miners but still 9,2 MH/s Tried to press "y" in miners and enabled compute mode. Reboot pc and still the same hashrate. I tried to use other software to enable compute mode and after restar - still 9,2 MH/s. Is there need to install all amd display driver package (software and so on)? Also is there someone who mining ETH in WINDOWS 7?How to unlock all potential speed of my gpu under win 7? EDIT: maybe I must tell that my pc is with older GTX 970 4GB as primary gpu and the new gpu RX570 is as second gpu on my MB. When you are enabling Compute mode, are your running your batchfile with an elevated command prompt? If not the compute mode won't turn on as it requires administration permissions to make the change.
|
|
|
|
under2020
Newbie
Offline
Activity: 4
Merit: 0
|
|
August 20, 2020, 08:50:04 PM |
|
Thanks for information BUT.....after a few hours of install and uninstall drivers and so on... still NOTHING. I use DDU and remove all drivers, after that i installed AMD display driver 19.5.2 but only display drivers. After reboot i try again miners but still 9,2 MH/s Tried to press "y" in miners and enabled compute mode. Reboot pc and still the same hashrate. I tried to use other software to enable compute mode and after restar - still 9,2 MH/s. Is there need to install all amd display driver package (software and so on)? Also is there someone who mining ETH in WINDOWS 7?How to unlock all potential speed of my gpu under win 7? EDIT: maybe I must tell that my pc is with older GTX 970 4GB as primary gpu and the new gpu RX570 is as second gpu on my MB. When you are enabling Compute mode, are your running your batchfile with an elevated command prompt? If not the compute mode won't turn on as it requires administration permissions to make the change. Just traied: run bat file as admin - still 9,42MH/s. Tried to put "-y 1" options in bat file and run again as admin - still the same......
|
|
|
|
br2459
|
|
August 20, 2020, 09:25:43 PM |
|
Thanks for information BUT.....after a few hours of install and uninstall drivers and so on... still NOTHING. I use DDU and remove all drivers, after that i installed AMD display driver 19.5.2 but only display drivers. After reboot i try again miners but still 9,2 MH/s Tried to press "y" in miners and enabled compute mode. Reboot pc and still the same hashrate. I tried to use other software to enable compute mode and after restar - still 9,2 MH/s. Is there need to install all amd display driver package (software and so on)? Also is there someone who mining ETH in WINDOWS 7?How to unlock all potential speed of my gpu under win 7? EDIT: maybe I must tell that my pc is with older GTX 970 4GB as primary gpu and the new gpu RX570 is as second gpu on my MB. When you are enabling Compute mode, are your running your batchfile with an elevated command prompt? If not the compute mode won't turn on as it requires administration permissions to make the change. Just traied: run bat file as admin - still 9,42MH/s. Tried to put "-y 1" options in bat file and run again as admin - still the same...... Can you post the contents of your batchfile in here? Also maybe grab a screenshot of when it askes you to press 1 to turn on Compute mode?
|
|
|
|
AzzAz
Legendary
Offline
Activity: 1030
Merit: 1006
|
|
August 20, 2020, 10:05:27 PM |
|
Thanks for information BUT.....after a few hours of install and uninstall drivers and so on... still NOTHING. I use DDU and remove all drivers, after that i installed AMD display driver 19.5.2 but only display drivers. After reboot i try again miners but still 9,2 MH/s Tried to press "y" in miners and enabled compute mode. Reboot pc and still the same hashrate. I tried to use other software to enable compute mode and after restar - still 9,2 MH/s. Is there need to install all amd display driver package (software and so on)? Also is there someone who mining ETH in WINDOWS 7?How to unlock all potential speed of my gpu under win 7? EDIT: maybe I must tell that my pc is with older GTX 970 4GB as primary gpu and the new gpu RX570 is as second gpu on my MB. When you are enabling Compute mode, are your running your batchfile with an elevated command prompt? If not the compute mode won't turn on as it requires administration permissions to make the change. Just traied: run bat file as admin - still 9,42MH/s. Tried to put "-y 1" options in bat file and run again as admin - still the same...... When DDU, set it to not download drivers automatically. Also set it to delete AMD foders. Also set it to run from Safe mode.... Also instal 20.4.2 and NOT the last driver ( well that depends on what windows version you have )
|
|
|
|
under2020
Newbie
Offline
Activity: 4
Merit: 0
|
|
August 21, 2020, 03:43:19 AM |
|
Thanks for information BUT.....after a few hours of install and uninstall drivers and so on... still NOTHING. I use DDU and remove all drivers, after that i installed AMD display driver 19.5.2 but only display drivers. After reboot i try again miners but still 9,2 MH/s Tried to press "y" in miners and enabled compute mode. Reboot pc and still the same hashrate. I tried to use other software to enable compute mode and after restar - still 9,2 MH/s. Is there need to install all amd display driver package (software and so on)? Also is there someone who mining ETH in WINDOWS 7?How to unlock all potential speed of my gpu under win 7? EDIT: maybe I must tell that my pc is with older GTX 970 4GB as primary gpu and the new gpu RX570 is as second gpu on my MB. When you are enabling Compute mode, are your running your batchfile with an elevated command prompt? If not the compute mode won't turn on as it requires administration permissions to make the change. Just traied: run bat file as admin - still 9,42MH/s. Tried to put "-y 1" options in bat file and run again as admin - still the same...... When DDU, set it to not download drivers automatically. Also set it to delete AMD foders. Also set it to run from Safe mode.... Also instal 20.4.2 and NOT the last driver ( well that depends on what windows version you have ) The bat file is: EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal *******.gpu -epsw x -rxboost 1 -platform 1 -etha 0 -mode 1 -y 1 -strap 1 I tried with and without "-strap" options, also and the default start.bat file - still the same. When i use DDU was in safe mode, before that deleted the AMD folders and after that i use 19.5.2 version and install the display driver manual - still the same. I used also and AMD-Compute-Switcher.exe software and it tell me that all of my gpu-s are in compute mode. When i start the miner it says that all amd gpus are in compute mode but 9,42MH/s@86W power....... I think there is a problem with my windows 7 or conflict with my default GTX 970 4GB gpu.
|
|
|
|
P00P135
|
|
August 21, 2020, 05:40:35 PM |
|
So sick of this fake pill malware being posted.
|
|
|
|
br2459
|
|
August 21, 2020, 07:30:36 PM |
|
So sick of this fake pill malware being posted.
I reported it to moderator.. Unfortunately they must be harvesting stolen creds from somewhere so they can peddle their malware..
|
|
|
|
GODLIKEE
Newbie
Offline
Activity: 26
Merit: 2
|
|
August 21, 2020, 11:13:11 PM |
|
Hello, I need a little help with a batch file.
How should my batch file look if I wanted to disable some number of cards after starting a miner?
For example, I start miner with batch file and I need to disable GPU 1 and GPU 4 right after starting a miner. How can I do that with a batch file?
Now my rig starts up with normal batch file for starting a miner and after that I just type 1 and 4 manually and cards are disabled. Can cards be disabled directly from batch, and enabled later manually?
*Sometimes I forget to disable cards and it makes a problem with some of my work, for which I need those two cards, that’s why I need miner to start with those cards disabled, and when I finish with them I would enable them back manually typing 1 and 4.
Thank you in advance
add -di 12 claymore command line start counting from 0 . gpu 1 =0 gpu 2= 1.......
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
August 22, 2020, 02:40:56 AM |
|
So sick of this fake pill malware being posted.
I reported it to moderator.. Unfortunately they must be harvesting stolen creds from somewhere so they can peddle their malware.. REPORT IT IF YOU SEE IT-- It is that simple. The moderator will delete the post. Reporting off-topic ads (astro-turf), lol-cat speak nonsense posts, obscene abusive posts, and etc. helps keep BitCoinTalk clean, relevant, and informative. Thanks... -scryptr
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2884
Merit: 1091
--- ChainWorks Industries ---
|
|
August 22, 2020, 03:54:27 AM |
|
So sick of this fake pill malware being posted.
I reported it to moderator.. Unfortunately they must be harvesting stolen creds from somewhere so they can peddle their malware.. REPORT IT IF YOU SEE IT-- It is that simple. The moderator will delete the post. Reporting off-topic ads (astro-turf), lol-cat speak nonsense posts, obscene abusive posts, and etc. helps keep BitCoinTalk clean, relevant, and informative. Thanks... -scryptr If only ... I have had a number of my posts deleted, even from WAY back in 2018 that have been deleted as recently as two weeks ago. The reporting/deletion is now becoming a complete farce, as it is really only about what 'others' say and not what 'you' say or what is supposedly 'on topic'. On our own self-moderated threads of CWI, I had a post of mine deleted also, even though I am the thread moderator. It's becoming a systemic issue that is much more than just 'reporting'. Admittedly some of my posts were just a matter of posting to remain on the thread, but they are few and far between. The main issue here is that reporting doesn't always justify deleting. So when a post like malware peddling is 'allowed' but my posts are being deleted, even from a thread as far back as 2018, then there is something much more at issue here than just posting - regardless of whether it is malware or not. Let's see if this post gets deleted just because it is not 'really' about Claymore and the miner! #crysx
|
|
|
|
big_daddy
|
ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA Support all miners for Windows (AMD+Nvidia) Hashrate 1080ti - 55 mh/s 2080ti - 68 mh/s RX5700 XT - 65 mh/s
More info: <<<<<LINK DELETED>>>>>>
DO NOT DOWNLOAD
TROJAN MALWARE ALERT
|
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
examplens
Legendary
Offline
Activity: 3444
Merit: 3468
Crypto Swap Exchange
|
ETHpillan - a new tablet to increase the hashrate on video cards from AMD and NVIDIA Support all miners for Windows (AMD+Nvidia) Hashrate 1080ti - 55 mh/s 2080ti - 68 mh/s RX5700 XT - 65 mh/s
More info: <<<<<LINK DELETED>>>>>>
DO NOT DOWNLOAD
TROJAN MALWARE ALERTZou need to post proof, so that they would not be just your words. I'll do it for you
|
|
|
|
big_daddy
|
|
August 22, 2020, 09:41:52 AM |
|
Tnx @examplens I'm was on mobile phone while posting that above
|
If you don't believe it or don't get it, I don't have the time to try to convince you, sorry.
|
|
|
br2459
|
|
August 22, 2020, 01:54:25 PM |
|
Has anyone modified a rx 5600 XT memory timings? I tried but Windows wasn't happy with it afterwards. Looking to see if anyone has been successful with it or not.
|
|
|
|
toti
Newbie
Offline
Activity: 9
Merit: 1
|
|
August 22, 2020, 03:35:15 PM |
|
Hello, I need a little help with old cards like sappohire r9-390x (hawaii).
Can we have a better hash than 16MH for each card ethereum?
My platform Asrock H81 Pro BTC Windows 10 Pro x64 Memory 8GB Claymore v15 with rxboost Adrenalin 20.4.2 6 Gpu R9-390x
Thanks
|
|
|
|
farsky
|
|
August 22, 2020, 06:16:15 PM Last edit: August 22, 2020, 06:26:54 PM by farsky |
|
Hi people ! I discovered this problem: the miner is working at full strength, but the pool signals that there is no hash rate. I restarted the miner - the hashrate appeared again. It's strange. As if the hashrate goes to someone else. The rig worked for someone else by hour for an hour. I use EthDcrMiner64.exe which I downloaded at the beginning of the year, there were no problems with it. Also checked all my files (bat, epools and dpools) there are no changes there. What could it be ? i use HotSpot Shield app PC free version P.S. By the way, what's the latest news from ETHpillan? Has the author been hacked? Why is ETHpillan now called a Trojan? Has this program always been a Trojan or just recently? I have an old version of this pill, I also had no problems with it, in those days, with a pill, my 1080 showed 50 Mh, I used it still .. a long time ago, a couple of years ago. I haven't mined for a long time, so I decided to turn it on again
|
Rus fascists: Goran_, mp3.Maniac, Xommy, ivan1975, lovesmayfamilis, Excimer, leonello, Snork1979, be.open, K210, Azrieli.
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
August 23, 2020, 05:46:23 PM |
|
So sick of this fake pill malware being posted.
I reported it to moderator.. Unfortunately they must be harvesting stolen creds from somewhere so they can peddle their malware.. REPORT IT IF YOU SEE IT-- It is that simple. The moderator will delete the post. Reporting off-topic ads (astro-turf), lol-cat speak nonsense posts, obscene abusive posts, and etc. helps keep BitCoinTalk clean, relevant, and informative. Thanks... -scryptr If only ... I have had a number of my posts deleted, even from WAY back in 2018 that have been deleted as recently as two weeks ago. The reporting/deletion is now becoming a complete farce, as it is really only about what 'others' say and not what 'you' say or what is supposedly 'on topic'. On our own self-moderated threads of CWI, I had a post of mine deleted also, even though I am the thread moderator. It's becoming a systemic issue that is much more than just 'reporting'. Admittedly some of my posts were just a matter of posting to remain on the thread, but they are few and far between. The main issue here is that reporting doesn't always justify deleting. So when a post like malware peddling is 'allowed' but my posts are being deleted, even from a thread as far back as 2018, then there is something much more at issue here than just posting - regardless of whether it is malware or not. Let's see if this post gets deleted just because it is not 'really' about Claymore and the miner! #crysx YOUR POST IS NOT ABUSIVE-- But I do remember some wild arguments from the dark ages. There have been some recent malicious posts that ARE being deleted by the moderator. And, I have run across some complete nonsense posts that were impossible to interpret. Eventually, I reported them. Not you, not now, not this time. --scryptr
|
|
|
|
dganm
Newbie
Offline
Activity: 8
Merit: 0
|
|
August 24, 2020, 12:51:37 PM |
|
I have 6 AMD R9 380 4GB cards running windows 10 mining etp or qkc because I'm not able to mine eth or etc anymore.
When the miner tries to mine the devfee (in eth pools), it crashes because there's no room for dag.
I have no problem as before about devfee but what could I do to solve this issue because I cannot not mine anything now because the crashes?
Thanks in advance!
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
I have 6 AMD R9 380 4GB cards running windows 10 mining etp or qkc because I'm not able to mine eth or etc anymore.
When the miner tries to mine the devfee (in eth pools), it crashes because there's no room for dag.
I have no problem as before about devfee but what could I do to solve this issue because I cannot not mine anything now because the crashes?
Thanks in advance!
Try -allcoins -1 or -nofee
|
|
|
|
|