Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[john1010]

New project EthereumPill release

More info: https://github.com/EthereumPill/PillForETH/releases/tag/1.0.0

Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

Did anybody tested this already? Seems sus

Do not use that they trying to access your ledger live! it should be removed from Git

I don't know why there';s so many members here are so too stubborn, some of the mod and admin here give their warnings about using this EthereumPill, because they've found that someone is using this application to access our computer specially our wallet and also the ledger, but this people are always making a post about it.

[1715448473]

1715448473

[1715448473]

1715448473

[1715448473]

1715448473

[1715448473]

1715448473

[scryptr]

IF YOU QUOTE THE LINK, IT STAYS ALIVE--

The moderator is deleting the posts as soon as they are being reported.

Just report them with the button.  Quoting them is a waste.       --scryptr

New project EthereumPill release

More info: MALICIOUS LINK DELETED

Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

Did anybody tested this already? Seems sus

[Lafu]

New project EthereumPill release

Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

Did anybody tested this already? Seems sus

@Asthix
@ivcelmik
@john1010

Can you please remove the link from your Quoted post you have done !!
Its an Malware download Link , just to be sure nobody click on it and gets infected with that shit .
Dont use it , your Account will be hacked after that possible, we got that in the past already .

Regards Lafu

[adaseb]

It seems almost every week that fake pill software is being pushed. At first it was clearly a scam because it was promoted by some newbie account, however it seems that more and more people are posting the link from a higher rank member and people are falling for it.

Most people they look at a link, then they check who posted it, if it someone with a fairly aged account, it establishes trust and people end up falling for the download. I guess that hacker is buying old accounts on Bitcointalk and starting to get clever.

So in the future, which will probably be in a few days or so since its so frequent, when you see this posted anywhere in the mining section, click the report link ASAP and the mods usually remove it fairly quickly. And whatever you do, don't requote the link posted.

[monkeeeey]

v15.0 doesn't seem to work for me on Linux for NVidia, driver version 455/cuda11.1.

You specified default wallet address, it is good for tests only, for normal mining you must change it to your wallet address!
ETH: 1 pool is specified
Main Ethereum pool is us1.ethpool.org:3333
DCR: 1 pool is specified
Main Decred pool is dcr.suprnova.cc:3252
Cannot load OpenCL library, AMD cards will be unavailable
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 11.1/8.0
GPU #0: GeForce RTX 2080 Ti, 11018 MB available, 68 compute units, capability: 7.5  (pci bus 1:0:0)
GPU #1: GeForce RTX 3080, 10018 MB available, 68 compute units, capability: 8.6  (pci bus 3:0:0)
Total cards: 2
ETH: Stratum - connecting to 'us1.ethpool.org' <172.65.229.54> port 3333 (unsecure)
ETH: Stratum - Connected (us1.ethpool.org:3333) (unsecure)
ETH: Authorized
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

 DCR: Stratum - connecting to 'dcr.suprnova.cc' <104.248.240.136> port 3252 (unsecure)
 DCR: Stratum - Connected (dcr.suprnova.cc:3252) (unsecure)
Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...
Setting DAG epoch #366(3.86GB)...
server: bind failed with error: 98 (check -mport option value), next attempt in 20sec...
ETH: 10/04/20-00:09:29 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:30 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:30 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
Create GPU buffer for GPU0
Create GPU buffer for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
GPU 1, Calc DAG failed!
ETH: 10/04/20-00:09:33 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:34 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 0 failed
GPU 1 failed
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 1, Calc DAG failed!
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
Quit signal received...
Quit, please wait...
GPU 0 failed
GPU 1 failed

[miner29]

v15.0 doesn't seem to work for me on Linux for NVidia, driver version 455/cuda11.1.

You specified default wallet address, it is good for tests only, for normal mining you must change it to your wallet address!
ETH: 1 pool is specified
Main Ethereum pool is us1.ethpool.org:3333
DCR: 1 pool is specified
Main Decred pool is dcr.suprnova.cc:3252
Cannot load OpenCL library, AMD cards will be unavailable
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 11.1/8.0
GPU #0: GeForce RTX 2080 Ti, 11018 MB available, 68 compute units, capability: 7.5  (pci bus 1:0:0)
GPU #1: GeForce RTX 3080, 10018 MB available, 68 compute units, capability: 8.6  (pci bus 3:0:0)
Total cards: 2
ETH: Stratum - connecting to 'us1.ethpool.org' <172.65.229.54> port 3333 (unsecure)
ETH: Stratum - Connected (us1.ethpool.org:3333) (unsecure)
ETH: Authorized
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

 DCR: Stratum - connecting to 'dcr.suprnova.cc' <104.248.240.136> port 3252 (unsecure)
 DCR: Stratum - Connected (dcr.suprnova.cc:3252) (unsecure)
Socket was closed remotely (by pool)
 DCR: Job timeout, disconnect, retry in 20 sec...
Setting DAG epoch #366(3.86GB)...
server: bind failed with error: 98 (check -mport option value), next attempt in 20sec...
ETH: 10/04/20-00:09:29 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:30 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:30 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
Create GPU buffer for GPU0
Create GPU buffer for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
GPU 1, Calc DAG failed!
ETH: 10/04/20-00:09:33 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-00:09:34 - New job from us1.ethpool.org:3333
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 0 failed
GPU 1 failed
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 1, Calc DAG failed!
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
Quit signal received...
Quit, please wait...
GPU 0 failed
GPU 1 failed

Try mining just eth and not dual mining.  If it works at least you can mine the profitable one.   

[yoonline]

teamredminer stopped working too for 4gb cards

[Bojcha]

teamredminer stopped working too for 4gb cards

no

[yoonline]

teamredminer stopped working too for 4gb cards

no

 for me yes, only 8gb working

[GODLIKEE]

New project EthereumPill release


Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

this is a FAKE TROJAN PILL

SCAM DONT DOWNLOAD

[DrG]

New project EthereumPill release

LINK REMOVED DUH

Hashrate:
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

Somebody must be getting some serious traction to keep posting these same scam github links for the Eth pill. I wonder if the mods have a forum filter that could be applied without filtering half of the Ethereum posts. I reported the offending post already.

Noobs, in case you don't know, there are a lot of hacked/sold accounts posting links to a fake GITHUB with malware.

[monkeeeey]

Try mining just eth and not dual mining.  If it works at least you can mine the profitable one.   

In case that wasn't already the case (I believe it was), I tried specifying -mode 1 and got

ETH: 1 pool is specified
Main Ethereum pool is eth-eu1.nanopool.org:9999
Cannot load OpenCL library, AMD cards will be unavailable
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 11.1/8.0
GPU #0: GeForce RTX 2080 Ti, 11018 MB available, 68 compute units, capability: 7.5  (pci bus 1:0:0)
GPU #1: GeForce RTX 3080, 10018 MB available, 68 compute units, capability: 8.6  (pci bus 3:0:0)
Total cards: 2

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <151.80.59.84> port 9999 (unsecure)
ETH: Stratum - Connected (eth-eu1.nanopool.org:9999) (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Authorized
Setting DAG epoch #366(3.86GB)...
ETH: 10/04/20-13:09:32 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
Setting DAG epoch #366 for GPU0
Setting DAG epoch #366 for GPU1
Create GPU buffer for GPU0
Create GPU buffer for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
GPU 1, Calc DAG failed!
ETH: 10/04/20-13:09:34 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:37 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 0 failed
Setting DAG epoch #366 for GPU0
GPU 1 failed
Setting DAG epoch #366 for GPU1
GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 1, Calc DAG failed!
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
ETH: 10/04/20-13:09:40 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 1 failed
GPU 0 failed
ETH: 10/04/20-13:09:43 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:46 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:49 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 10/04/20-13:09:52 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU0 t=60C fan=41% P=53W, GPU1 t=43C fan=0% P=104W
Total GPUs power consumption: 157 Watts
WATCHDOG: GPU error, you need to restart miner

[xandry]

GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function

It seems that Claymore miner doesn't support CUDA 10 on Linux, try to switch on another miner. It can be Phoenix Miner, Team Red Miner or T-rex miner for example.

For reference: [Linux] Claymore fails with GpuMiner cu_kd failed 8 (0)

[monkeeeey]

GPU 1, GpuMiner cu_kd failed 8 (0), invalid device function

It seems that Claymore miner doesn't support CUDA 10 on Linux, try to switch on another miner. It can be Phoenix Miner, Team Red Miner or T-rex miner for example.

For reference: [Linux] Claymore fails with GpuMiner cu_kd failed 8 (0)

I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).

[cudapop]

I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).

What hashrate does Ethminer give you for the 3080?

[fatmeto]

What is the alternative coin for 4gb rx570,580 and 470
I have 75 pieces.  All 4gb. I Try to ravencoin but not good mining for money

[monkeeeey]

I compiled Ethminer https://github.com/ethereum-mining/ethminer/blob/master/docs/BUILD.md and it works. But I did have to change ethminer/libethash-cuda/CMakeLists.txt to ignore old (sm_30-35 that don't work with CUDA 11) and add new 86 architecture (list(APPEND CUDA_NVCC_FLAGS "-gencode arch=compute_86,code=sm_86")).

What hashrate does Ethminer give you for the 3080?

86.5. For 2080 Ti with +300 mem OC it's 52.7.

[apolousm]

Hi guys, hope you are doing well today.

Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.

[adaseb]

Hi guys, hope you are doing well today.

Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.

We asked him to fix this many times in the past. I also had issues with the Dwarfpool dev fee issues. I also had other issues where it fails to mine on the dev fee pool and eventually stops mining all together because the software thinks you are trying to cheat it. Very annoying because it causes the rigs to do a full hang and require a cold restart.

Last time he was active in this thread was Nov 2019, he was usually very active in the past, even when he didn't make updates. Now I think he might be retired from developement. He made crazy gains since his miner was the only decent software during the 2017 market boom and probably saved up tons of ETH and just living on an island somewhere.

[apolousm]

Hi guys, hope you are doing well today.

Wanted to know, any chance to ask Claymore to update his drvfee address? As Dwarfpool is not working anymore his mining configuration may be affecting the mining process and dropping the hashrate more than it should. I don't know if that's just me, but in my case the hashrate drops significantly everytime the rig wants to connect to his Dwarfpool mining address as the pool is not working anymore. Anyone can let him know? please.

We asked him to fix this many times in the past. I also had issues with the Dwarfpool dev fee issues. I also had other issues where it fails to mine on the dev fee pool and eventually stops mining all together because the software thinks you are trying to cheat it. Very annoying because it causes the rigs to do a full hang and require a cold restart.

Last time he was active in this thread was Nov 2019, he was usually very active in the past, even when he didn't make updates. Now I think he might be retired from developement. He made crazy gains since his miner was the only decent software during the 2017 market boom and probably saved up tons of ETH and just living on an island somewhere.

I supposed something like that. So, we are using an out of date software that is not being maintained and is causing problems due to the developer lack of commitment. Is he even alive? I can't believe someone could just let the golden eggs chicken and just leave. Anyway, hope he fixes the problem.

Thanks for letting me know...