Hotmetal
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 12:12:39 PM |
|
Bug report:
Gigabyte 1070 Aorus:
Core MHz:0 Memory MHz: 0 Power Limit (watt): 80
$ cat /home/miner/config.json
{"status":"ok","minerPath":"\/root\/miner\/ewbf-0.3.4b\/miner","minerOptions":"--server btg.suprnova.cc --user ZZZ.ZZ_004 --pass x --port 8816 --pec","ocCore":"0","ocMemory":"0","ocPowerlimit":"80","ocTempTarget":"75","ocFanSpeedMin":"40","srrEnabled":null,"srrSerial":null,"srrSlot":null,"ocVddc":""}
[..] Applying CoreOffset: 0 MemoryOffset: 0 for GPU 5 with GPU Type: 3 Available power limit for GPU 5 is 105.00 W, 240.00 W Applying PowerLimit: 105 for GPU 5 Applying CoreOffset: 0 MemoryOffset: 0 for GPU 6 with GPU Type: 3 Available power limit for GPU 6 is 105.00 W, 240.00 W Applying PowerLimit: 105 for GPU 6 Applying CoreOffset: 0 MemoryOffset: 0 for GPU 7 with GPU Type: 3
Can anyone explain why it's clearly configured both via the web and the configuration to set the power limit to 80 but instead its applying those high power limits?
|
|
|
|
ledio
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 12:19:42 PM |
|
Ok that sounds easy, but is that in Kind of the Asrock 110 with 13 GPU Spots the same and it is that also nothing to say, on the Asrock H110 i have white and Black GPU sockets
Starting from left to right from the CPU end... 6,1,9,0 (full slot), 10,2,11,3,12,4,7,5,8
|
|
|
|
willi9974
Legendary
Offline
Activity: 3528
Merit: 2816
Escrow Service
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 12:21:37 PM |
|
Ok that sounds easy, but is that in Kind of the Asrock 110 with 13 GPU Spots the same and it is that also nothing to say, on the Asrock H110 i have white and Black GPU sockets
Starting from left to right from the CPU end... 6,1,9,0 (full slot), 10,2,11,3,12,4,7,5,8 Perfect, i will check it Thanks !!!!!
|
|
|
|
dj_janker
Newbie
Offline
Activity: 10
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 02:35:19 PM |
|
Hi, I would like to know the commands (by ssh) for reload my rigs, please.
Can samebody help me, please?
Thanks
Sorry I need to reload my miner no my rig... Please help!
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 02:39:40 PM |
|
This image is optimized for newer cards? 1070ti?
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
daywalker2503
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 04:22:39 PM |
|
Hy Since the last update i get the following error: Failed to connect to Mir: Failed to connect to server socket: No such file or directory Unable to init server: Could not connect: Connection refused error: the control display is undefined; please run `nvidia-settings --help` for usage information.
I can mine but none of the overclocks are working. Anyone an idea?
|
|
|
|
AnnoyingMosquito
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 05:21:11 PM |
|
What are the improvements for this driver version?
|
|
|
|
rigmasterkurulum
Copper Member
Jr. Member
Offline
Activity: 52
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 05:43:52 PM |
|
Hi,
I would like to report a problem that I have been having. I have downloaded the zip file, flashed it to a 16 GB USB with Etcher then plugged in to the motherboard. On the BOOT options, I can't see the USB flashdrive. It is still booting from HDD. I have tried different USBs and I can easily boot linux from the same USB if I install linux but can't see the simplemining.
Is there any fix for that or am I doing something wrong?
|
|
|
|
dagarair
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 05:58:02 PM |
|
Does anyone know what version and settings to run for Pandminer (470 version) with simplemining? So damn tired of the Pandaminer Windows crap Also, do I use the dagfix version or not?
All mine (i have 30 470 pandas) are on Smos and they are hashing at 235. I can't log into smos at the moment it must be down but I did not mod the oc setting or anything as I recall. EDIT: Ok just logged in: no mods but visible settings on screen are 1145 2100 core - blank mem - blank underv - blank ps - 6 tt- 75
|
|
|
|
xPETEx
Newbie
Offline
Activity: 55
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 06:07:14 PM |
|
Hi, I would like to know the commands (by ssh) for reload my rigs, please.
Can samebody help me, please?
Thanks
What do you mean by reload? reboot? just type "reboot" then hit enter.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 06:10:30 PM |
|
Does anyone know what version and settings to run for Pandminer (470 version) with simplemining? So damn tired of the Pandaminer Windows crap Also, do I use the dagfix version or not?
All mine (i have 30 470 pandas) are on Smos and they are hashing at 235. I can't log into smos at the moment it must be down but I did not mod the oc setting or anything as I recall. EDIT: Ok just logged in: no mods but visible settings on screen are 1145 2100 core - blank mem - blank underv - blank ps - 6 tt- 75 I think those Pandas out of box are already ROM modded to somewhat "low power". The blank/blank/blank thing on smOS is to set settings at default so all is good.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
bytiges
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 09:48:50 PM |
|
Hello,
I found a bug in simplemining.
When a mail with a '+' in the lhs is used for the account (like me+you@domain.com), the rigs will fail to register with the site and won't be visible in the dash board. The + is a perfectly valid separator, so I guess this is a bug.
Took me about 2 days to figure it out.
|
|
|
|
VyprBTC
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 10:14:17 PM |
|
Hello,
I found a bug in simplemining.
When a mail with a '+' in the lhs is used for the account (like me+you@domain.com), the rigs will fail to register with the site and won't be visible in the dash board. The + is a perfectly valid separator, so I guess this is a bug.
Took me about 2 days to figure it out.
Yep, I figured that out a few weeks ago when I used smos for the first time, I use the + to see what sites are sending me spam and don't reg on sites that don't allow it. So if I started getting spam from say vyprbtc+smos@vyprbtc.com i would know it's smos sending me the spam.
|
|
|
|
Kalyst69
Jr. Member
Offline
Activity: 147
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 10:22:31 PM |
|
Hi,
I would like to report a problem that I have been having. I have downloaded the zip file, flashed it to a 16 GB USB with Etcher then plugged in to the motherboard. On the BOOT options, I can't see the USB flashdrive. It is still booting from HDD. I have tried different USBs and I can easily boot linux from the same USB if I install linux but can't see the simplemining.
Is there any fix for that or am I doing something wrong?
I had the same problem the first time, my mobo was unable to detect the USB Key with SMOS. First disable the UEFI, then in the booting option, just select 'USB key' (the generic name)
|
Host your ASICs in Siberia for $0.07/KW all inclusive. Contact me for information.
|
|
|
silverleew1
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 84
Merit: 16
Begone junkers!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 15, 2017, 10:43:49 PM |
|
Do you have referral bonus?
Because i think i can share this to all my friend in my country (they all stuck because niceinsiderhack)
Well, like 0.25$ for each for referral get into my account so i can cut off my accounts fee on yours? hehehehe..
|
|
|
|
spacegrey
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 03:48:37 AM |
|
Got a ASUS ROG Stix RX570 card (Elpida) It suddenly runs only at 4 MHz ETH under smOS When I boot it to Win10 it runs at 23+ (which is also low considering that it's modded) with same exact overclock settings (1150/2000/850) I'm dazzled with what could possibly be wrong here. Any help appreciated.
|
|
|
|
technicalsis404
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 03:20:12 PM |
|
Quick Question -
Does smos not order the GPU's based on what slot they're in?
I have a rig of 13, 3 of them are 570's, and the rest are 580s
For OC purposes, I put the 570's in the first 3 slots. However, when looking at the dashboard, there are indeed 3 CC/MC figures that are lower than the rest (the 570's) but they aren't the first 3 in the list! They are all spread around.
Does anyone know how smos orders the GPU's and how I can be sure i'm OC'ing the right card?
|
|
|
|
SeriousApe
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 03:54:17 PM |
|
Hy Since the last update i get the following error: Failed to connect to Mir: Failed to connect to server socket: No such file or directory Unable to init server: Could not connect: Connection refused error: the control display is undefined; please run `nvidia-settings --help` for usage information.
I can mine but none of the overclocks are working. Anyone an idea?
Hey, I do have the same Problem. Setup: 13 1050Ti Asrock h110 pro BTC+ since the last update. can anyone pls help?
|
|
|
|
delbarbour
Newbie
Offline
Activity: 72
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 04:44:47 PM |
|
Quick Question -
Does smos not order the GPU's based on what slot they're in?
I have a rig of 13, 3 of them are 570's, and the rest are 580s
For OC purposes, I put the 570's in the first 3 slots. However, when looking at the dashboard, there are indeed 3 CC/MC figures that are lower than the rest (the 570's) but they aren't the first 3 in the list! They are all spread around.
Does anyone know how smos orders the GPU's and how I can be sure i'm OC'ing the right card?
Not really even from ssh u will view both as Ellesmere 4g/8g the best approach so far it to hot unplug USB from rise and see which GPU hangs ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) i did that on one of my rigs
|
|
|
|
timbereagle
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 16, 2017, 04:50:55 PM |
|
Quick Question -
Does smos not order the GPU's based on what slot they're in?
I have a rig of 13, 3 of them are 570's, and the rest are 580s
For OC purposes, I put the 570's in the first 3 slots. However, when looking at the dashboard, there are indeed 3 CC/MC figures that are lower than the rest (the 570's) but they aren't the first 3 in the list! They are all spread around.
Does anyone know how smos orders the GPU's and how I can be sure i'm OC'ing the right card?
It is almost impossible to know which is which GPU. however SMOS has one good feature. In SMOS, Usually lets say GPU3 is always GPU3. In windows every restart is totally reseting gpu numbers.
|
|
|
|
|