Hashrate RX 470

[willi9974]

thanks, i will have a look in the other forum.

i have a backup from my firmware and if i open the file with the polaris editor, it look not goot, i have no right values in mh/z

Bios Backup
https://www.file-upload.net/download-12478023/bios_470_org.rom.html

Picture


it this normal, that i have marked in blue?

Willi

[liomojo1]

I have 6x Asus 470 8gb micron , moded the bios and put 1625 strap and then clocked ddr to 1950 and gpu to 1140 , up the TDP 25% and they make 27mgh. The problem is that if i put a monitor to any card wich is 1950 and hashing for hours with no problem and no errors in Hwinfo and stop the miner the pc crashes! I thought that one card is poor , but changing others and put the monitor to them they start to do the same, is there a way to fix this!
And don't believe that they burn 100watt, 6 cards burn 1200watt dualmining and 1000w only eth! It is very disappointing !

[Truthchanter]

I have 6x Asus 470 8gb micron , moded the bios and put 1625 strap and then clocked ddr to 1950 and gpu to 1140 , up the TDP 25% and they make 27mgh. The problem is that if i put a monitor to any card wich is 1950 and hashing for hours with no problem and no errors in Hwinfo and stop the miner the pc crashes! I thought that one card is poor , but changing others and put the monitor to them they start to do the same, is there a way to fix this!
And don't believe that they burn 100watt, 6 cards burn 1200watt dualmining and 1000w only eth! It is very disappointing !

You can get a bit under 1000w dualmining 6gpu if you undervolt enough

[w0lf0.]

guys what method you use for fast test your gpus stability oc/undervolt? one program for see errors or something?

[Truthchanter]

guys what method you use for fast test your gpus stability oc/undervolt? one program for see errors or something?

At least 24-48h mining to see if it's stable.. an hour test will give you a hint of stability but has occasionally not been enough

[willi9974]

I have 6x Asus 470 8gb micron , moded the bios and put 1625 strap and then clocked ddr to 1950 and gpu to 1140 , up the TDP 25% and they make 27mgh. The problem is that if i put a monitor to any card wich is 1950 and hashing for hours with no problem and no errors in Hwinfo and stop the miner the pc crashes! I thought that one card is poor , but changing others and put the monitor to them they start to do the same, is there a way to fix this!
And don't believe that they burn 100watt, 6 cards burn 1200watt dualmining and 1000w only eth! It is very disappointing !

Hi,

i think the 1625 strap is clear, i must copy the dato to the other up fields.

but clock ddr to 1950 is not clear for me, what i have to do, which field do you men?
and up the TDP by 25% is the TDP 85 plus 25% = new number for TDP 126, right?

and a other question, where can i underclock to reduce the power at wall, some peaple speak from 28-30 mh/s with under 100 watt...

Regards
Willi

[liomojo1]

You have to install msi afterburner and manipulate clocks and voltage there , not in the Polaris editor!

[liomojo1]

I have 6x Asus 470 8gb micron , moded the bios and put 1625 strap and then clocked ddr to 1950 and gpu to 1140 , up the TDP 25% and they make 27mgh. The problem is that if i put a monitor to any card wich is 1950 and hashing for hours with no problem and no errors in Hwinfo and stop the miner the pc crashes! I thought that one card is poor , but changing others and put the monitor to them they start to do the same, is there a way to fix this!
And don't believe that they burn 100watt, 6 cards burn 1200watt dualmining and 1000w only eth! It is very disappointing !

You can get a bit under 1000w dualmining 6gpu if you undervolt enough

I don`t know how much to undervolt , i undervolted it to 940mv and still the system burned 1150 watt, this -40mv in msu afterburner! Using btc pro and celeron and 2 psu corsair cx750 !
Anyone can help with the problem after stoping the miner?

[w0lf0.]

I have 6x Asus 470 8gb micron , moded the bios and put 1625 strap and then clocked ddr to 1950 and gpu to 1140 , up the TDP 25% and they make 27mgh. The problem is that if i put a monitor to any card wich is 1950 and hashing for hours with no problem and no errors in Hwinfo and stop the miner the pc crashes! I thought that one card is poor , but changing others and put the monitor to them they start to do the same, is there a way to fix this!
And don't believe that they burn 100watt, 6 cards burn 1200watt dualmining and 1000w only eth! It is very disappointing !

You can get a bit under 1000w dualmining 6gpu if you undervolt enough

I don`t know how much to undervolt , i undervolted it to 940mv and still the system burned 1150 watt, this -40mv in msu afterburner! Using btc pro and celeron and 2 psu corsair cx750 !
Anyone can help with the problem after stoping the miner?

i'am noob with mining but usually undervolt guides say to do -100mv

[willi9974]

You have to install msi afterburner and manipulate clocks and voltage there , not in the Polaris editor!

Perfect! Did i need a special version of MSI Afterburner or onle the newest one from the MSI page?
https://de.msi.com/page/afterburner

[w0lf0.]

You have to install msi afterburner and manipulate clocks and voltage there , not in the Polaris editor!

Perfect! Did i need a special version of MSI Afterburner or onle the newest one from the MSI page?
https://de.msi.com/page/afterburner

it's ok

[willi9974]

ok now, after a lot of work, her are my stats

166 mh/s
940 Watt at the wall
-100 mv core voltage
+25% PowerLimit
1120 mhz CoreClock
1910 mhz Mem Clock

any feedback it is ok or have anybody a other better way to make the stats better?

Willi

[liomojo1]

It is perfect! You are lucky with your micron cards! Mine don`t want to undervolt that much!
Is this dual mining or only eth?

[willi9974]

only eth at the moment
witch coin are the best for dualmining at the moment?

[liomojo1]

Decred i think.

[leole]

Hello To all,

I have a question regarding the hashrate of the card Asus Radeon STRIX-RX470-O4G-GAMING 4Gb mining monero .

I use Claymore and my max H/s is 540 actually but when I look at Benchmarks on http://monerobechmarks.byethost5.com/  I see that most of the people are getting up to 740H/s on monero with similar card.

I did make a lot of research on google and several sites but no way to get more details about how to get this H/s .

In the past I did mine dogecoin with radeon card and I remember that it was possible to use different settings in the bat file that could serioulsy raise the H/s .

But I have no idea how to do that with Claymore and I did not find any example settings to try.


Could any one help me out ?

Thank you
leole

[Swiped]

When the AMD 500 series came out, I bought up a number of 470 8g cards in desperation.  Most of my experience has been with Sapphire nitro+ rx 470 8g cards, and in my haste I bought a number of Sapphire nitro rx 470 8g {not the + version} and so far I have come to the conclusion that they suck ass.  I can't seem to mod the bios without them not responding, and almost any moves I make with voltages makes them unstable.  I have read this whole forum and saw that others have had these same issues, but I didn't find any clear success stories either.  There was a lot of talk mid to late last year about these cards, so I am hoping someone has figured out a way to get these cards up to 27-28 MH/s with a wattage lower than what I am getting at 24 MH/s.  Any real life solutions are appreciated.  I simply want them stable and using less power at an average hash rate.  I am not looking for miracles, but perhaps a bit of hope would be nice.  I have spent hours and hours trying to get these cards to a better level of performance to no avail.  I appreciate any consideration.

[leole]

I did follow the instruction on this site http://cryptoyeti.com/rx470-bios-mod/ .

Very easy but the problem is that when done the original drivers do no longer detect the card So I can not use it anymore and need to load back original drivers.

[Swiped]

When the AMD 500 series came out, I bought up a number of 470 8g cards in desperation.  Most of my experience has been with Sapphire nitro+ rx 470 8g cards, and in my haste I bought a number of Sapphire nitro rx 470 8g {not the + version} and so far I have come to the conclusion that they suck ass.  I can't seem to mod the bios without them not responding, and almost any moves I make with voltages makes them unstable.  I have read this whole forum and saw that others have had these same issues, but I didn't find any clear success stories either.  There was a lot of talk mid to late last year about these cards, so I am hoping someone has figured out a way to get these cards up to 27-28 MH/s with a wattage lower than what I am getting at 24 MH/s.  Any real life solutions are appreciated.  I simply want them stable and using less power at an average hash rate.  I am not looking for miracles, but perhaps a bit of hope would be nice.  I have spent hours and hours trying to get these cards to a better level of performance to no avail.  I appreciate any consideration.

How many do you have?

18, and I still can't seem to get a good set up for them.  The most I can get is 24 mh/s per card with 6 cards pulling 1000W, but I really want 27-28 mh/s like the nitro+ cards if possible.  Any thoughts?

[Swiped]

When the AMD 500 series came out, I bought up a number of 470 8g cards in desperation.  Most of my experience has been with Sapphire nitro+ rx 470 8g cards, and in my haste I bought a number of Sapphire nitro rx 470 8g {not the + version} and so far I have come to the conclusion that they suck ass.  I can't seem to mod the bios without them not responding, and almost any moves I make with voltages makes them unstable.  I have read this whole forum and saw that others have had these same issues, but I didn't find any clear success stories either.  There was a lot of talk mid to late last year about these cards, so I am hoping someone has figured out a way to get these cards up to 27-28 MH/s with a wattage lower than what I am getting at 24 MH/s.  Any real life solutions are appreciated.  I simply want them stable and using less power at an average hash rate.  I am not looking for miracles, but perhaps a bit of hope would be nice.  I have spent hours and hours trying to get these cards to a better level of performance to no avail.  I appreciate any consideration.

How many do you have?

18, and I still can't seem to get a good set up for them.  The most I can get is 24 mh/s per card with 6 cards pulling 1000W, but I really want 27-28 mh/s like the nitro+ cards if possible.  Any thoughts?

What memory type?

Here is what the cards are:
Card name: Radeon (TM) RX 470 Graphics
GPU: Ellesmere
Device Id: 1002-67DF : 174B-E353
Die Size: 232 mm²
Bus Interface: PCI-Express x16 3.0 @ x1 1.1
Memory Size: 8192 MB
Memory Type: GDDR5
Memory Bus Width: 256 bit
ROPs: 32
Shaders: 2048 Unified / DirectX 12 (12_0)
Driver Version: 21.19.164.257 Crimson 16.11.5
BIOS Version: 015.050.000.000.000000
BIOS Part Number: 113-2E353BU.O4I
UEFI Support: Yes