Genesis Mining Presents: SGMiner-GM - now with Zawawa's GG! [Updated 17/01/2017]

[antantti]

How do you mine xmr?
Here only I get W / H error

Something wrong with your hardware/ launch configuration.

I do not know, maybe it could be
Can you tell me how you wrote the commands in the miner?

Read that first post in this thread, set everything to default. If you still get only h/w errors there must be something wrong with your h/w.

All other programs normally run only the one that fails
I'm using this line

sgminer  -k ethash -o eth.pool.minergate.com:45791 -u you_email -p x

You need xmr.conf file, copy/paste below (from op), edit to your needs.

Then launch with command sgminer -c xmr.conf

Code:

{
    "pools":
    [
        {
            "name": "MoneroPool",
            "url": "stratum+tcp://mine.moneropool.com:3333",
            "user": "x",
            "pass": "x",
            "priority": "0",
            "profile": "xmr"
        }
    ],
    "profiles":
    [
        {
            "name": "xmr",
            "algorithm": "cryptonight",
            "rawintensity": "1024",
            "worksize": "8",
            "gpu-engine": "1000,1050,1050,1000",
            "gpu-memclock": "1500,500,1500,1500",
            "gpu-powertune": "20,50,50,50",
            "gpu-threads": "1",
            "gpu-fan": "100"
        }
    ],
    "default-profile": "xmr",
    "no-submit-stale": true,
    "no-extranonce": true
}

[yurasic park]

How do you mine xmr?
Here only I get W / H error

Something wrong with your hardware/ launch configuration.

I do not know, maybe it could be
Can you tell me how you wrote the commands in the miner?

Read that first post in this thread, set everything to default. If you still get only h/w errors there must be something wrong with your h/w.

All other programs normally run only the one that fails
I'm using this line

sgminer  -k ethash -o eth.pool.minergate.com:45791 -u you_email -p x

You need xmr.conf file, copy/paste below (from op), edit to your needs.

Then launch with command sgminer -c xmr.conf

Code:

{
    "pools":
    [
        {
            "name": "MoneroPool",
            "url": "stratum+tcp://mine.moneropool.com:3333",
            "user": "x",
            "pass": "x",
            "priority": "0",
            "profile": "xmr"
        }
    ],
    "profiles":
    [
        {
            "name": "xmr",
            "algorithm": "cryptonight",
            "rawintensity": "1024",
            "worksize": "8",
            "gpu-engine": "1000,1050,1050,1000",
            "gpu-memclock": "1500,500,1500,1500",
            "gpu-powertune": "20,50,50,50",
            "gpu-threads": "1",
            "gpu-fan": "100"
        }
    ],
    "default-profile": "xmr",
    "no-submit-stale": true,
    "no-extranonce": true
}

You can particularly see your file. Do not send the first page only.

[antantti]

You can particularly see your file. Do not send the first page only.

Who? Me? What do you want to see?

edit:

1100/1500 -100mV (~1.07V).

gpu0 elpida 1250 strap
gpu1 hynix 1125 strap
gpu2 elpida 1250 strap

[sminside]

what the best raw intensity for rx 480 and 470 on mining eth guys ?

[yurasic park]

You can particularly see your file. Do not send the first page only.

Who? Me? What do you want to see?

edit:

1100/1500 -100mV (~1.07V).

gpu0 elpida 1250 strap
gpu1 hynix 1125 strap
gpu2 elpida 1250 strap

http://i67.tinypic.com/b4jot4.jpg

I would like to see himself config.conf file

[OhGodAGirl]

Hey guys!

SGMiner-GM 5.5.5 is out. Check the main post, otherwise, here is the release page.

Let me know if there are any bugs. We know XMR algorithm switching is a bit funky, we're working with a driver limitation and all we can do is patch it until AMD gets their act together and fixes some things.

Enjoy!

[yoyo1]

Congratulations!
Thank you for all your work mates.
It's really cool.

[yurasic park]

Hey guys!

SGMiner-GM 5.5.5 is out. Check the main post, otherwise, here is the release page.

Let me know if there are any bugs. We know XMR algorithm switching is a bit funky, we're working with a driver limitation and all we can do is patch it until AMD gets their act together and fixes some things.

Enjoy!

A version for Windows will be?

[yoyo1]

Well, I was able to make zcash mining work at 210 h/s for RX 480 8Gb at stock.
Eth makes cry me hardware errors still.
There were a lot of warnings during compiling mostly about version 5.5.4 -> 5.5.5 change
But it looks like I have to dive into the details.

[Brewins]

Genesis Mining wasn't going to upgrade this shit, glad Zawawa is actually doing some good stuff.  Zawawa please stay away from allowing GM to ride your coattail and Advertise your work to promote their cloud mining

[xneoenx]

Genesis Mining wasn't going to upgrade this shit, glad Zawawa is actually doing some good stuff.  Zawawa please stay away from allowing GM to ride your coattail and Advertise your work to promote their cloud mining

Beauty of open source, fortunately or unfortunately.

[OhGodAGirl]

Genesis Mining wasn't going to upgrade this shit, glad Zawawa is actually doing some good stuff.  Zawawa please stay away from allowing GM to ride your coattail and Advertise your work to promote their cloud mining

Beauty of open source, fortunately or unfortunately.

Not true, actually. Plenty of people know that Wolf0 and I have been working on it in our spare time, but we're not going to release a buggy piece of software. Then Zawawa came along and did it far better than we could.

If you have an issue, please, do tell me. But don't blame Genesis Mining for this. And by all means, bring it up with Wolf0 - I'm sure he'll put you in your place.

[xneoenx]

Genesis Mining wasn't going to upgrade this shit, glad Zawawa is actually doing some good stuff.  Zawawa please stay away from allowing GM to ride your coattail and Advertise your work to promote their cloud mining

Beauty of open source, fortunately or unfortunately.

Not true, actually. Plenty of people know that Wolf0 and I have been working on it in our spare time, but we're not going to release a buggy piece of software. Then Zawawa came along and did it far better than we could.

If you have an issue, please, do tell me. But don't blame Genesis Mining for this. And by all means, bring it up with Wolf0 - I'm sure he'll put you in your place.

Meh...

[yurasic park]

Well, I was able to make zcash mining work at 210 h/s for RX 480 8Gb at stock.
Eth makes cry me hardware errors still.
There were a lot of warnings during compiling mostly about version 5.5.4 -> 5.5.5 change
But it looks like I have to dive into the details.

There's supposed to be a few HW errors, maybe one or two per minute on Eth.

Tell me please! Will there be a version for Windows? Thank you very much in advance.

[OhGodAGirl]

Well, I was able to make zcash mining work at 210 h/s for RX 480 8Gb at stock.
Eth makes cry me hardware errors still.
There were a lot of warnings during compiling mostly about version 5.5.4 -> 5.5.5 change
But it looks like I have to dive into the details.

There's supposed to be a few HW errors, maybe one or two per minute on Eth.

Tell me please! Will there be a version for Windows? Thank you very much in advance.

It's already posted, hon. Here!

I'll update the main post soon.

I'm working on adding NiceHash support right now, though, fair warning: I cannot test it until I get back from travels.

[JuanHungLo]

I would really appreciate a config file or command line batch file for anyone using this with windows, 280x or 7970, for XMR.
Thanks.

[manotroll]

How do you mine xmr?
Here only I get W / H error

Something wrong with your hardware/ launch configuration.

I do not know, maybe it could be
Can you tell me how you wrote the commands in the miner?

Read that first post in this thread, set everything to default. If you still get only h/w errors there must be something wrong with your h/w.

All other programs normally run only the one that fails
I'm using this line

sgminer  -k ethash -o eth.pool.minergate.com:45791 -u you_email -p x

You need xmr.conf file, copy/paste below (from op), edit to your needs.

Then launch with command sgminer -c xmr.conf

Code:

{
    "pools":
    [
        {
            "name": "MoneroPool",
            "url": "stratum+tcp://mine.moneropool.com:3333",
            "user": "x",
            "pass": "x",
            "priority": "0",
            "profile": "xmr"
        }
    ],
    "profiles":
    [
        {
            "name": "xmr",
            "algorithm": "cryptonight",
            "rawintensity": "1024",
            "worksize": "8",
            "gpu-engine": "1000,1050,1050,1000",
            "gpu-memclock": "1500,500,1500,1500",
            "gpu-powertune": "20,50,50,50",
            "gpu-threads": "1",
            "gpu-fan": "100"
        }
    ],
    "default-profile": "xmr",
    "no-submit-stale": true,
    "no-extranonce": true
}

You can particularly see your file. Do not send the first page only.

Would like setup for etc / eth

[cryptomanman]

After moving from 5.5.4 to 5.5.5, it no longer shows gpu temp or fan speed. This is on lubuntu 16.04, amdgpu-pro 16.40, AMDSDK 3.0. And yes, I did move the required files to ADL_SDK. Any thoughts?

[Brewins]

Genesis Mining wasn't going to upgrade this shit, glad Zawawa is actually doing some good stuff.  Zawawa please stay away from allowing GM to ride your coattail and Advertise your work to promote their cloud mining

Oh no! GM put Zawawa's work together with a miner with monitoring and an API! So horrid, I can see why you think they're bad.

Maybe I am wrong but I was thinking that Zawawa put his code into SGminer and was not aware that you put it into SGminer.  If that is correct I apologize.

[john1010]

I am using now sgminer-gm 5.5.5 and here's the result..

3 RX 480 8gb Stock with Crimson Relive 17.1.1.. Im now mining zcash/zcl

My bat:

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100

sgminer.exe -k equihash -o zcl-apac.suprnova.cc:4042 -u john1010.MyPC -p x -I 24 -g 2 -w 256 --thread-concurrency 8192 --lookup-gap 2 --vectors 1 --gpu-platform 0 --gpu-threads 2 --gpu-fan 74

I don't know if I done this right, if you guys a good bat config/sgminer confg kindly share your idea.. Thanks