Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 17, 2017, 08:26:04 PM |
|
I have 5 cards on my system. R9 270, rx 570, (2) rx 470, rx 480. No matter what I do, one card will always fail except the r9 270. It starts every single time. I get Gpu X failed, disabled. Any tips? The only time I don't get a failure is if I have just the r9 270 and one other card connected. I'm running windows 10. I have used drivers 16.9.2, the block chain drivers, and the latest amd drivers.
Thanks,
hmmm... are you sure you are pushing correct configurations to the right cards? this is how I configure my single 370 among the 470s : "rawintensity": "512,512,512,512,384", "worksize": "4,4,4,4,10"
|
|
|
|
galaxy5user
Newbie
Offline
Activity: 55
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 19, 2017, 07:48:34 AM |
|
This miner ignores '--name' parameter. It unconditionally uses the first pool from a config file, regardless of having other elements of 'pools' array.
|
|
|
|
Ursul0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 25, 2017, 04:59:18 AM |
|
What's up with the crazy high rejects rates? Hashing Cryptonight I'm getting 5+% of rejected shares on various pools/coins on this miner, while the GG pre6 rarely goes above 3% rejects.
|
|
|
|
Zeta0S
Legendary
Offline
Activity: 1890
Merit: 1031
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 02, 2017, 12:02:32 AM |
|
What's up with the crazy high rejects rates? Hashing Cryptonight I'm getting 5+% of rejected shares on various pools/coins on this miner, while the GG pre6 rarely goes above 3% rejects.
No problems here.
|
|
|
|
nowaltcoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 11, 2017, 08:37:34 PM Last edit: October 12, 2017, 07:18:39 PM by nowaltcoin |
|
Hi,
due to the tipps and hints i found here i'd like to share my results and settings:
Mining XMR at Nanopool
Rig one:
Windows 7 Home Premium 64 bit AMD-Driver 15.300.1025.1001 SGMiner-GM 5.5.5-8
2 * R9 270 2G (sapphire) ri:340 ws:4 gt:2 345 H/s each 1 * HD 7850 2G (XFX) ri:256 ws:4 gt:2 320 H/s ----------------------------------------------------------------------------------------- Rig total 1010 H/s ---- with Claymore's CryptoNote AMD GPU Miner v10.2 ------------------------- Rig total 1230 H/s
Rig two:
Windows 7 Home Ultimate 64 bit AMD-Driver 15.300.1025.0 SGMiner-GM 5.5.5-8
4 * HD 7850 2G ( HIS ICEQ X) ri:256 ws:4 gt:2 330 H/s each ------------------------------------------------------------------------------------------ Rig total 1320 H/s ---- with Claymore's CryptoNote AMD GPU Miner v10.2 -------------------------- Rig total 1625 H/s
Rig three:
Windows 8.1 Pro 64 bit AMD-Driver 21.19.155.257 (6 GPU-Patch) SGMiner-GM 5.5.5-8
6 * HD 7790 1G (HIS/ASUS/XFX) ri:192 ws:4 gt:2 204 H/s each ------------------------------------------------------------------------------------------- Rig total 1230 H/s ---- with Claymore's CryptoNote AMD GPU Miner v9.7 ------------------------- Rig total 1200 H/s
---------------------> All rigs : 3560 H/s ---------------------> Power at the wall: 1240 watt ---------with-------> All rigs : 4050 H/s ----- claymore-----> Power at the wall: 1215 watt
Have a nice day
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
galaxy5user
Newbie
Offline
Activity: 55
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 12, 2017, 07:16:09 AM |
|
Is this miner works OK with nanopool? I've tried one, but the accepted shares log updates surprisingly slowly - about 1 share per minute.
|
|
|
|
Call_Me_Bambi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 13, 2017, 09:02:10 PM |
|
Is this miner works OK with nanopool? I've tried one, but the accepted shares log updates surprisingly slowly - about 1 share per minute.
It may help if you are more specific about which coin it is you are mining on Nanopool. I use sgminer on Mining Pool Hub, to mine Monero, and it runs smoothly without any problems. Maybe try a different pool and see if there is an improvement.
|
|
|
|
Murfy76
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 18, 2017, 12:36:58 PM |
|
Stay away from nanopool and monero mining, there is high difficulty. You can mine more XMR with other pools. Second reason, nanopool became more like megapool - it's too big for network.
@Wolf: Best miner I've used, thank you! Btw: Is there any chance that you will release new version of sgminer-gm?
|
|
|
|
nowaltcoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 18, 2017, 01:07:54 PM |
|
Stay away from nanopool and monero mining, there is high difficulty. You can mine more XMR with other pools. Second reason, nanopool became more like megapool - it's too big for network.
This is not correct for the size of nanopool ....see here: http://minexmr.com/pools.htmlBut right: Here are some pools with their difficulty........ and nanopool has the highest and static difficulty Nanopool: Share difficulty is static and equal to 120000 dwarfpool: 100000 for high-end CPU and GPU-Rigs minexmr: Difficulty: 35000 Description: SSL port for Claymore monero-crypto-pool.fr: Difficulty: 50000 Customs Difficulty Accepted: Append +DIFF Mining Address Description: SSL Port Stratum
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
gugs
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 18, 2017, 01:18:19 PM |
|
Awesome miner, works perfect! I have a question: what is the difference between ethash.cl, ethash-new.cl and ethash-genoil.cl? I've tried all of them but only ethash.cl works under Win10. Cheers!
|
|
|
|
gugs
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 19, 2017, 08:49:42 AM |
|
Awesome miner, works perfect! I have a question: what is the difference between ethash.cl, ethash-new.cl and ethash-genoil.cl? I've tried all of them but only ethash.cl works under Win10. Cheers!
Please, anyone got some info?
|
|
|
|
Call_Me_Bambi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 23, 2017, 03:10:48 PM |
|
I think I have a bit of a problem with SGminer fan/hashrate reporting, can anyone help ?
I have a 6 card setup and I use Afterburner to set the votlage & OC settings. The problem, if it is one, is trying to identify which card is which in SGminer.
I tried by increasing the fan speed in AB and seeing which GPU fan in SGminer increased thus identifying the GPU associated with AB, but I don't think this worked as when I increased the memory clock (of the GPU I just increased the fan speed of) a different GPU hashrate increased ! Am I just imagining it or is the reported fan speeds and hashrates of the GUPs sort of mixed up ?
|
|
|
|
pehoko
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 10, 2017, 02:46:44 PM |
|
Card identities are not equal in windows, sgminer and AB. Why not to try overclock cards with sgminer config file?
|
|
|
|
eatkrispykreme
Newbie
Offline
Activity: 1
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2017, 05:32:18 AM |
|
Hey guys, I have been trying to decipher this thread to get some cards running without much luck.
I am trying to get some old cards running with sgminer. The standard ubuntu 16.04 sgminer 5.5.5 tutorial works for my 7790s but nothing else (I believe opencl 2.0 is to blame since all other cards are opencl 1.2). I am looking for a way to get the rest running. I am trying xubuntu 14.04.4 (found out 14.04.5 does not work with old drivers) right now. I also am trying windows 7 with 15.12 drivers. I get a strange error about not setting the GPU_USE_SYNC_OBJECTS is not specified. Also error -11.
I am just trying to get the radeon hd 7000 cards running now...then I will work on the 6000 and 5000.
If anyone knows of any tutorials for correct installation of sgminer on windows 7 (or if you know if the win build document is still relevant after two years) I would appreciate the information.
Also drivers that work on ubuntu with sgminer and support 7000 series cards would also help as well. I appears 14.6 and 14.9 given in a few guides are no longer accessible.
Thanks in advance to anyone that can help me out. I really appreciate it.
|
|
|
|
nowaltcoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2017, 04:01:55 PM |
|
Hi,
i get my 7790 (six cards) running with windows 7 without no problems. At the moment i'am using claymores miner, but i remember sg.5.5.5 was running on my rig too !
but you have to set or set_x
GPU_FORCE_64BIT_PTR 1 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
before in the bat or cmd file !
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
Call_Me_Bambi
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2017, 05:45:55 PM |
|
Hi,
i get my 7790 (six cards) running with windows 7 without no problems. At the moment i'am using claymores miner, but i remember sg.5.5.5 was running on my rig too !
but you have to set or set_x
GPU_FORCE_64BIT_PTR 1 GPU_MAX_HEAP_SIZE 100 GPU_USE_SYNC_OBJECTS 1 GPU_MAX_ALLOC_PERCENT 100 GPU_SINGLE_ALLOC_PERCENT 100
before in the bat or cmd file !
I've not used "set_x" so don't know what that will do. This is how I have it setup and it works just fine mining the likes of Sumokoin, SmartCash, ZCash, Monero and Digibyte..to name but a phew ! setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_MAX_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
EDIT: This is for SGminer, put it in the .bat file.
|
|
|
|
nowaltcoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2017, 08:48:21 PM |
|
Sorry,
its correct setx not set_x as i stated !
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
noobminer001
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2017, 08:50:12 PM |
|
I've been having stability issues using Claymore CryptoNote so I wanted to try out SGMiner.
I'm trying to config sgminer 5.5.5 in Simplemining OS for my rigs. It looks like it is using the commandline to pass in arguments. In SMOS the default is:
--no-submit-stale --kernel cryptonight -o stratum+tcp://cryptonight.usa.nicehash.com:3355 -u [yourwallet].$rigName -p x --rawintensity 1000 -w 8 --text-only
I would like to change the rawintensity, worksize etc to be optimized for my miners. I have two different setups, either RX 570 4G or RX580 8G.
For the RX570 4G I'm trying to pass a --rawintensity 512 --worksize 4. For the RX580 8G, I'm trying to pass --rawintensity 1152 --worksize 8.
However, when I do this, I see no chanage in performance. Also, when it initializes, I don't see any values changing, just shows: Initialising kernel cryptonight.cl with nfactor 10, n 1024
Right now I'm only hashing at 480H/s on the 570 and 677H/s on the RX580. With Claymore I was getting 630H/s and 740H/s respectively.
I've also seen people change the gpu-threads to 2. Does this matter on the RX570 or RX580 cards? Should I be changing these values too?
Thanks.
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 17, 2017, 01:44:23 AM |
|
I've been having stability issues using Claymore CryptoNote so I wanted to try out SGMiner.
I'm trying to config sgminer 5.5.5 in Simplemining OS for my rigs. It looks like it is using the commandline to pass in arguments. In SMOS the default is:
--no-submit-stale --kernel cryptonight -o stratum+tcp://cryptonight.usa.nicehash.com:3355 -u [yourwallet].$rigName -p x --rawintensity 1000 -w 8 --text-only
I would like to change the rawintensity, worksize etc to be optimized for my miners. I have two different setups, either RX 570 4G or RX580 8G.
For the RX570 4G I'm trying to pass a --rawintensity 512 --worksize 4. For the RX580 8G, I'm trying to pass --rawintensity 1152 --worksize 8.
However, when I do this, I see no chanage in performance. Also, when it initializes, I don't see any values changing, just shows: Initialising kernel cryptonight.cl with nfactor 10, n 1024
Right now I'm only hashing at 480H/s on the 570 and 677H/s on the RX580. With Claymore I was getting 630H/s and 740H/s respectively.
I've also seen people change the gpu-threads to 2. Does this matter on the RX570 or RX580 cards? Should I be changing these values too?
Thanks.
USE A CONFIGURATION FILE-- A good configuration file is described a page or so back. Your RawIntensity values are too high, and 4 is too many threads. There are examples posted by the code authors earlier in this thread. Stick with 1 or 2 threads, 504 or 508 RI, or 1012 or 1016 RI with 1 thread. --scryptr
|
|
|
|
Pennywis3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2017, 11:29:30 PM |
|
Any Plans for this to get updated?
I really has remarkable speeds, it would be nice if GPU overclocking functions would work and the right data for each gpu would be displayed.
|
|
|
|
|