Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[bayo]

When you will push linux build???

[toptek]

my problem is not your a thief and steal someone's code , i hope your not my problem is the FEE I wish you would  give us a some way to pay to unlock it instead you say if i don't like it don't use it ,my repose back is  I have to if I  want to mine and use windows sense i don't write code and not to good at it. or I would write my own and wouldn't use your miner and as it stands once there is a working version of silent army for windows, i won't use it , right now i have to . I don't hate you, we all have to make a living some way or another . i hope you understand why i feel like i do and why . I'm sure you will ignore this because you don't care .


thanks top .


 

[Trimegistus]

Claymore is MEGA-monster!  
RX480 4G with mod. mem timings = 70-72 sol\sec

Really? Just memory timings? No overclocking? Could you please share those timings? My Sapphire 480 4GB are doing -50...

[Trimegistus]

do the rx 4-- cards work with 15.12?

No

[maxmad_x]

Claymore is MEGA-monster!  
RX480 4G with mod. mem timings = 70-72 sol\sec

Which RX? I have 480s which are running at 62-65 on Boysie 29MH rom

[Trimegistus]

See https://www.youtube.com/watch?v=Mwb67g4skGM
If you have two cards (or built-in video, in case something goes wrong), you can try to take timings from frequency 1500Mhz - will be work even faster.
This may not be on all the cards, my card works with latency rate from 1350 Mhz.

You copied the 1350 timings to the higher frequencies?

[mettalmag]

guys what about this ? is there any chance to modify the miner config which can mine on one pool for two workers ? 90% of hashing power for one and 10% hashing power to another?
or are there any other options ?

anyone ?

[HerrDirektor]

Claymore is MEGA-monster!  
RX480 4G with mod. mem timings = 70-72 sol\sec

Really? Just memory timings? No overclocking? Could you please share those timings? My Sapphire 480 4GB are doing -50...

This is latency change and memory overclock - 1950@1000mV, GPU is stock - 1303Mhz

[xeridea]

my problem is not your a thief and steal someone's code , i hope your not my problem is the FEE I wish you would  give us a some way to pay to unlock it instead you say if i don't like it don't use it ,my repose back is  I have to if I  want to mine and use windows sense i don't write code and not to good at it. or I would write my own and wouldn't use your miner and as it stands once there is a working version of silent army for windows, i won't use it , right now i have to . I don't hate you, we all have to make a living some way or another . i hope you understand why i feel like i do and why . I'm sure you will ignore this because you don't care .


thanks top .


 

So you could get 80H/s on Claymore, or 78H/s after fee.  Or you could get 50H/s on SilentArmy with no fee.  Nothing against SA miner, and I am all for FOSS, just saying speeds aren't as fast.  Claymore is making this super fast miner, use it or don't?  You don't HAVE to use it.  You could just not mine at all.  His many many hours of work enable you to get good returns on mining, quit complaining.  Having a paid miner is dumb, makes it harder for the small miner, and you don't know how good it will be until you buy it.  Plus it adds a lot of useless overhead for Claymore micro managing all the sales.

[igotek]

The version 3.0 gives error:

Code:

VIDEO_TDR_FAILURE

atikmpag.sys

The older versions work without any problem. When I start v3.0, the pc gives error and resart winwods again.


6x R9 390X

Solution:

-Uninstall 16.2 driver
-Install 15.12 driver

It works now. But I see 55 - 60 Mh/s (R9 390X)

[djoctuk]

Version 3 has given more power to gain, thank you.  

[HerrDirektor]

See https://www.youtube.com/watch?v=Mwb67g4skGM
If you have two cards (or built-in video, in case something goes wrong), you can try to take timings from frequency 1500Mhz - will be work even faster.
This may not be on all the cards, my card works with latency rate from 1350 Mhz.

You copied the 1350 timings to the higher frequencies?

Yes. But better try to copy from 1500Mhz to all higher freq. Not all cards can operate with lower latency.
I had about 15 times to flash the BIOS, to find the right latency (until memory is beginning to work perfectly)

[carlo_0000]

V 3.0  i m getting

73 on r9 390
42 r9 380
36 r9 270
49 rx 470 4g

I'm getting 50-55 on r9 390, what drivers and i setting you use?

16.10.3 with 1090 gpu 1525 memory  I2

[CoinPro69]

Anyone has a Sapphire 470 8gb with OC ?
Share speeds pls

[carlo_0000]

Anyone has a Sapphire 470 8gb with OC ?
Share speeds pls

no but sapphire 470 4G i get 49  so i guest you must do better

[disman]

nvidia

[Quietman]

V 3.0  i m getting

73 on r9 390
42 r9 380
36 r9 270
49 rx 470 4g

I'm getting 50-55 on r9 390, what drivers and i setting you use?

16.10.3 with 1090 gpu 1525 memory  I2

If you have the R9 390, the speed is too low. You should get at least 68 Sol/s with factory stock setting.

[Eyedol-X]

3.0 working great on all my rigs here... loving the speed increase -- THANKS!

[vel12]

r9 390x 78-83 Sols

[densets]

Miner never starts with my 390x , with 15.12 drivers