Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[Stealth8368]

Can anyone tell me what this error is?

ZEC: Received error: {"id":4,"error":{"code":-32700,"message":"Cannotfindjob"}}

looks like there was an error receiving work from pool

[ayiphelmy]

rx 480 8 gb powercolor red devil

on stock setting nope?
must be modded yeah?

look at rejects veersus up time and total shares

Yeah now i see 19 Rejects in 16sec
Thanks

This is stock bios.... reject show up when dev fee

wtf... I'm only getting 140h/s on those GPUs...

This is claymore V10.0

[Stealth8368]

Anyone exp this.  Miner will show tons of shares being submitted but nothing accepted.  This happen to me on flypool so I switch to coinmine. But now I'm thinking maybe is glitch. If I teamview in and press s for statistics after showing the stats it will only show a few shares being accepted but many being submitted.  I've only seen this on my msi gaming 5 'mobo with 6x480 with powered USB risers.

BR
d57heinz

yes and I posted few pages ago: Provider/Network quality(upload) made that to half my rigs ( same rigs at two places, one working like that, other perfect ). And I did other test: turn of half rigs and other half now has accepted shares

Interesting.  That would make sense as I'm on sat net at home. And that is the rig effected.  Hmmm. Never has been an issue for me in the past. Got some troubleshooting to do I guess

Thanks
BR

Test 2: switch to eth and everything is fine. Like less traffic.

i responded to a post further back about a fault using v7 that caused internet to crash,strange as miner keeps working after reporting error but I can not reach outside websites after it happens I rebooted rigs to solve problem but I get the warning still regularly in v7 software,as I am not alone with this issue Claymore will be looking into it as he reads the thread so watch out for a fix soon,I should add I have 80 Mb fiber connection

[bardacuda]

ps 1350w means nothing... you need tell brand  of psu ...

pls look this link.its my PSU
http://www.green-case.com/products/power/power.php?model=GP1350B-OC_Plus

Seems the platform for that unit is CWT-PUO1350V. jonnyguru did a review for that unit here. There were a few questionable things...mainly the power cord it came with (which is only an issue in a 115V system)...but overall nothing too bad. I think your main problem was having unpowered risers. A good rule of thumb is to run PCI-E power through the motherboard for no more than two cards...but the fewer the better. This includes cards plugged directly into the board and any on unpowered risers, but it's a good idea to only use powered risers. Anything more than 2 cards should definitely be on powered risers only. Use Molex rather than SATA for your powered risers, and don't power more than 2 risers on one Molex chain. Good luck with your RMAs.

[bitromn]

why getting so many rejected shares 

+1

[udaredme]

I'm getting 168 - 175 on each of my rx480 8 gig.
I had to revert back to stock bios on my hd7950 due to incorrect data errors, smooth as butter with a 160-165 average. I havent noticed rejected shares being higher than before.

[manoe]

Anyone exp this.  Miner will show tons of shares being submitted but nothing accepted.  This happen to me on flypool so I switch to coinmine. But now I'm thinking maybe is glitch. If I teamview in and press s for statistics after showing the stats it will only show a few shares being accepted but many being submitted.  I've only seen this on my msi gaming 5 'mobo with 6x480 with powered USB risers.

BR
d57heinz

yes and I posted few pages ago: Provider/Network quality(upload) made that to half my rigs ( same rigs at two places, one working like that, other perfect ). And I did other test: turn of half rigs and other half now has accepted shares

Interesting.  That would make sense as I'm on sat net at home. And that is the rig effected.  Hmmm. Never has been an issue for me in the past. Got some troubleshooting to do I guess

Thanks
BR

Test 2: switch to eth and everything is fine. Like less traffic.

i responded to a post further back about a fault using v7 that caused internet to crash,strange as miner keeps working after reporting error but I can not reach outside websites after it happens I rebooted rigs to solve problem but I get the warning still regularly in v7 software,as I am not alone with this issue Claymore will be looking into it as he reads the thread so watch out for a fix soon.

I had the same probs the evening after i just upgraded to v.7.0 the internet was falling out after 10 min., then also the gpu was doing strange after a while getting 0 h/s. After a while looking to fixt this i came out with one bad riser, a bad stock internet cable ( after i had a new cable the internet issue was gone), and my virtual memory that was back on stock setting after my new windows so i fixed all these things and now v7.0 is running with 50 watts less and 5% more hash speeds than v6.0 for the rx 480 4gbs. Running for 30 hours stable with each 2 houres payout on flypool 0.01zec so this all worked for me maybe it helps to somebody else to.

[Trimegistus]

ZEC profitability again below ETH

[ilia_vs]

perhaps ZEC is dead ?

[HardwarePal]

For those looking for solid pools the only ones I like are

Flypool flypool.org - Big pool with nice stats from the Etherminer guys
Zogpool zogpool.org  - Small pool from one of the Zogminer open source miner developers (add -allpools 1 to config to get this one working with Claymore)

[Maskedman]

Nice to see that improvement in hashrate, but I think it won't change that ZCash is doomed compared to Ethereum.

[TheChief5055]

i would love to see some developing towards vulcan api instead of only openGL . it would be very interesting . maybe it has some potential .
i am just starting to learn code writing so i have next to 0 skills .

It's not OpenGL, it's OpenCL. Nothin' to do with Vulkan here, it's not a 3D shooter.

[HellSong]

i would love to see some developing towards vulcan api instead of only openGL . it would be very interesting . maybe it has some potential .
i am just starting to learn code writing so i have next to 0 skills .

It's not OpenGL, it's OpenCL. Nothin' to do with Vulkan here, it's not a 3D shooter.

im just asking stupid things because im new to all of this . as i said i have next to 0 skills .
anyways thx for clearing it .

[Amph]

Nice to see that improvement in hashrate, but I think it won't change that ZCash is doomed compared to Ethereum.

actually increasing the hash will not give you anything, because everyone will have his hash increased, only nvidia is screwed on zcash at the moment because of no optimization

[vectisitch]

back to mining eth i think

[SparkIt]

How can mining Eth be good if this isn't?

I get 15MH/s Eth mining, 170H/s ZEC.
With ETH my GPU load is 99%, with ZEC it's 50-60%. So let's say 300w ETH, 200-250W ZEC. I get $0.8-0.9 mining ZEC, $0.2 mining ETH.

Sure, I'm not mining either atm, I'm mining a coin with low market cap but low diff (I earn about $2 á day)

EDIT: And sure, the price is dropping. But if you sell ZEC and then buy ETH with the profits, you'll get more by mining ZEC right now.

[Hotmetal]

Nice to see that improvement in hashrate, but I think it won't change that ZCash is doomed compared to Ethereum.

actually increasing the hash will not give you anything, because everyone will have his hash increased, only nvidia is screwed on zcash at the moment because of no optimization

Just wait until Nvidia optimizations happen (in the pipeline for Optiminer shortly), ZEC will get pummeled.

[oslak]

Had trouble with V7 crashing on start, fresh windows install fixed it (10)
Results
280x       169
280x       180
280x       182
290        192
fury (no x) 239

All stock bios no OC

Whats the power consumption of 280x on stock using v7?

[fmz89]

http://wccftech.com/amd-vega-10-4096-gcn/  FPGA feature on GPU, nice movement
hope this gpu will kill all those old gpu, make zec mining profitable again

[snakey]

http://wccftech.com/amd-vega-10-4096-gcn/  FPGA feature on GPU, nice movement
hope this gpu will kill all those old gpu, make zec mining profitable again

How? everyone will just start buying these new cards...