kinsik
Newbie
Offline
Activity: 39
Merit: 0
|
|
February 14, 2017, 08:55:16 AM |
|
ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
|
|
|
|
Demarsac
|
|
February 14, 2017, 09:03:48 AM |
|
ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
For the Fury's i would return to 16.3.2 drivers
|
|
|
|
Hurtman
|
|
February 14, 2017, 09:05:34 AM |
|
Make cryptonote not crash on RX 4x series. God damned crashing non stop on default bios. Zcash 11.1 runs for 500+ hours but i want to mine cryptonote coins. Less than one hour before crash. Pile of shit!
Same problem here. That's why I can't mine XMR so I need to stay on ZEC. It's rock-stable sgminer-gm v5.5.5 and wolf 0.4 is better and stable for XMR mining - until Claymore updates the XMR miner for RX cards.... not a better and not a stable
|
|
|
|
Pennywis3
|
|
February 14, 2017, 09:09:52 AM |
|
Pleas up speed r9 380 r9 380 4gb memory have 190 h/s, in game testing is 10 to 15 percent less R9 280, 280 but we 295 h/s R9 380 has a 256 bit memory bus, while the R9 280 has a 384 bit bus. Thats why is hashing faster, not much you can do about it.
|
|
|
|
kinsik
Newbie
Offline
Activity: 39
Merit: 0
|
|
February 14, 2017, 09:13:10 AM |
|
ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
For the Fury's i would return to 16.3.2 drivers This is not possible as it does not support RX series and i have a mixed rig. Still is there anyone that uses different drivers or have mixed rig either?
|
|
|
|
ffthomas
|
|
February 14, 2017, 09:20:27 AM |
|
ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
For the Fury's i would return to 16.3.2 drivers This is not possible as it does not support RX series and i have a mixed rig. Still is there anyone that uses different drivers or have mixed rig either? 16.3.2 supports Polaris (RX) cards. 15.12 is the older one that doesn't support RX series.
|
|
|
|
KrokoTill
Newbie
Offline
Activity: 51
Merit: 0
|
|
February 14, 2017, 09:21:58 AM |
|
Yeah I did not concentrate on tonga cards. I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select.
+1 for XMR. And please make -li mode smoother for win desktop. Zec is fine to use in background even with high intensities, but no way with XMR even with -li 1.
|
|
|
|
Hurtman
|
|
February 14, 2017, 09:23:59 AM |
|
ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
For the Fury's i would return to 16.3.2 drivers This is not possible as it does not support RX series and i have a mixed rig. Still is there anyone that uses different drivers or have mixed rig either? 16.3.2 supports Polaris (RX) cards. 15.12 is the older one that doesn't support RX series. For 4xx cards (Polaris) Crimson 16.12.2 is recommended.
|
|
|
|
Demarsac
|
|
February 14, 2017, 09:29:08 AM |
|
ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
For the Fury's i would return to 16.3.2 drivers This is not possible as it does not support RX series and i have a mixed rig. Still is there anyone that uses different drivers or have mixed rig either? 16.3.2 supports Polaris (RX) cards. 15.12 is the older one that doesn't support RX series. Thanks ffthomas, you beat me to the reply
|
|
|
|
kinsik
Newbie
Offline
Activity: 39
Merit: 0
|
|
February 14, 2017, 09:43:10 AM |
|
ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
For the Fury's i would return to 16.3.2 drivers This is not possible as it does not support RX series and i have a mixed rig. Still is there anyone that uses different drivers or have mixed rig either? 16.3.2 supports Polaris (RX) cards. 15.12 is the older one that doesn't support RX series. 16.3.2 does not support Polaris. See http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-Software-Crimson-Edition-16-3-2.aspx16.6.2 is the first driver to support Polaris.
|
|
|
|
issie81
|
|
February 14, 2017, 09:54:27 AM |
|
to be honest i am disappointed the given specs 450sol for Nanos are no way near (between 395-410) i think voor Nano the speed is about the same as 11.1, Optiminer is quicker (atleast for Nanos)
|
|
|
|
ffthomas
|
|
February 14, 2017, 10:04:17 AM |
|
ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
For the Fury's i would return to 16.3.2 drivers This is not possible as it does not support RX series and i have a mixed rig. Still is there anyone that uses different drivers or have mixed rig either? 16.3.2 supports Polaris (RX) cards. 15.12 is the older one that doesn't support RX series. 16.3.2 does not support Polaris. See http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-Software-Crimson-Edition-16-3-2.aspx16.6.2 is the first driver to support Polaris. I can't make a test right now but.. anyway.. I use Crimson 16.7.3 for both RX and R9 series too. So there is no problem if you have a mixed (R9 Fury / RX 4xx) rig. Update: Claymore recommends 16.12.2 for RX cards.
|
|
|
|
|
ffthomas
|
|
February 14, 2017, 10:06:42 AM |
|
msi rx 470 - 250h/s / card on win 10, i used the recommended drivers. 290 only linux ?
Do you use -asm 1 and -i 6 parameters? (these are the defaults if you didn't set them)
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
February 14, 2017, 10:08:43 AM |
|
to be honest i am disappointed the given specs 450sol for Nanos are no way near (between 395-410) i think voor Nano the speed is about the same as 11.1, Optiminer is quicker (atleast for Nanos)
"-powlim 50" option + drivers 15.12 or 16.3.2 is the solution. ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
For the Fury's i would return to 16.3.2 drivers This is not possible as it does not support RX series and i have a mixed rig. Still is there anyone that uses different drivers or have mixed rig either? 16.3.2 supports Polaris (RX) cards. 15.12 is the older one that doesn't support RX series. 16.3.2 does not support Polaris. See http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-Software-Crimson-Edition-16-3-2.aspx16.6.2 is the first driver to support Polaris. I can't make a test right now but maybe there is a mistake on AMD's site. Anyway.. Claymore use 16.3.2 for testing his miner on RX series. And also he recommends 16.3.2 for RX series (Polaris cards). I use Crimson 16.7.3 for both RX and R9 series too. So there is no problem if you have a mixed (R9 Fury / RX 4xx) rig. For mixed rigs Fury + RX4xx you won't be able to get full speed from Fury because latest good drivers for Fury is 16.3.2 and they don't support Polaris. 16.6.2 and higher support Polaris but they cannot provide full speed for Fury.
|
|
|
|
Demarsac
|
|
February 14, 2017, 10:09:29 AM |
|
ASM does not work for R9 Fury with any intensity on 17.1.1 driver. Is this expected?
For the Fury's i would return to 16.3.2 drivers This is not possible as it does not support RX series and i have a mixed rig. Still is there anyone that uses different drivers or have mixed rig either? 16.3.2 supports Polaris (RX) cards. 15.12 is the older one that doesn't support RX series. 16.3.2 does not support Polaris. See http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-Software-Crimson-Edition-16-3-2.aspx16.6.2 is the first driver to support Polaris. Try 16.10.1 I can vouch they work for me Use DDU and safe mode to change drivers Also don't forget to disallow Windows 10 from updating your drivers
|
|
|
|
coinscrow
|
|
February 14, 2017, 10:12:03 AM Last edit: February 14, 2017, 10:24:58 AM by coinscrow |
|
msi rx 470 - 250h/s / card on win 10, i used the recommended drivers. 290 only linux ?
Do you use -asm 1 and -i 6 parameters? (these are the defaults if you didn't set them) I set -asm 1 and -i6 now 266H/s. Can i take it higher? with setx GPU_MAX_ALLOC_PERCENT=100 about 270h/s https://minerstat.xyz/public/coinscrow.html
|
|
|
|
Mr047
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 14, 2017, 10:26:10 AM |
|
msi rx 470 - 250h/s / card on win 10, i used the recommended drivers. 290 only linux ?
Do you use -asm 1 and -i 6 parameters? (these are the defaults if you didn't set them) I set -asm 1 and -i6 now 266H/s. Can i take it higher? with setx GPU_MAX_ALLOC_PERCENT=100 about 270h/s https://minerstat.xyz/public/coinscrow.htmlWin7 + 16.10.1 drivers + Rx470 4Gb (Elpida and Hynix) ~ 295 h/s (no miner options)
|
|
|
|
coinscrow
|
|
February 14, 2017, 10:27:35 AM |
|
msi rx 470 - 250h/s / card on win 10, i used the recommended drivers. 290 only linux ?
Do you use -asm 1 and -i 6 parameters? (these are the defaults if you didn't set them) I set -asm 1 and -i6 now 266H/s. Can i take it higher? with setx GPU_MAX_ALLOC_PERCENT=100 about 270h/s https://minerstat.xyz/public/coinscrow.htmlWin7 + 16.10.1 drivers + Rx470 4Gb (Elpida and Hyix) ~ 295 h/s (no miner options) 16.12.2 driver what i use.
|
|
|
|
semajjames
|
|
February 14, 2017, 10:41:46 AM |
|
Are you guys finding that different makes/speed of ram make any difference to mining rigs ?
|
|
|
|
|