Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[joe50]

any idea on the best pool to mine zec that is very profitable?

currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.

flypool is good for me

thank you, will try it out



please can you tell me the best server to use on flypool?

           Asia                                   China                            Europe                           US
Server   asia1-zcash.flypool.org   cn1-zcash.flypool.org            eu1-zcash.flypool.org   us1-zcash.flypool.org

[haxiboy]

any idea on the best pool to mine zec that is very profitable?

currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.

flypool is good for me

thank you, will try it out



please can you tell me the best server to use on flypool?

           Asia                                   China                            Europe                           US
Server   asia1-zcash.flypool.org   cn1-zcash.flypool.org            eu1-zcash.flypool.org   us1-zcash.flypool.org

I use the EU one because it is my region, but it does not matter. Select the one closest to your region.

[ayiphelmy]

any idea on the best pool to mine zec that is very profitable?

currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.

flypool is good for me

thank you, will try it out



please can you tell me the best server to use on flypool?

           Asia                                   China                            Europe                           US
Server   asia1-zcash.flypool.org   cn1-zcash.flypool.org            eu1-zcash.flypool.org   us1-zcash.flypool.org

I use the EU one because it is my region, but it does not matter. Select the one closest to your region.

i use usa server and eu for failover... asia server have some issue couple times

[asidamani]

any idea on the best pool to mine zec that is very profitable?

currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.

flypool is good for me

thank you, will try it out



please can you tell me the best server to use on flypool?

           Asia                                   China                            Europe                           US
Server   asia1-zcash.flypool.org   cn1-zcash.flypool.org            eu1-zcash.flypool.org   us1-zcash.flypool.org

It dependes on the latency of the connection to the pool. You can try with the "ping" command.

[bbulles]

Hi folks,

I searched and found nothing here, any luck with claymore and slushpool?

Thanks
Marc

[usefree]

07:33:06:808   b78   Got incorrect temperature 511, ignore
07:33:06:808   b78   GPU0 t=53C fan=82%, GPU1 t=0C fan=0%
07:33:06:824   b78   em hbt: 0, fm hbt: 0,
07:33:06:824   b78   watchdog - thread 0, hb time 87921
07:33:06:824   b78   WATCHDOG: GPU 0 hangs in OpenCL call, exit
07:33:06:839   b78   watchdog - thread 1, hb time 87468
07:33:06:839   b78   WATCHDOG: GPU 0 hangs in OpenCL call, exit
07:33:06:839   b78   watchdog - thread 2, hb time 88125
07:33:06:855   b78   WATCHDOG: GPU 0 hangs in OpenCL call, exit
07:33:06:855   b78   watchdog - thread 3, hb time 87703
07:33:06:855   b78   WATCHDOG: GPU 0 hangs in OpenCL call, exit
07:33:06:855   b78   watchdog - thread 4, hb time 218
07:33:06:871   b78   watchdog - thread 5, hb time 656
07:33:06:871   b78   watchdog - thread 6, hb time 875
07:33:06:871   b78   watchdog - thread 7, hb time 437
07:33:06:886   b78   Got incorrect temperature 511, ignore
07:33:08:449   b78   Restarting OK, exit...

i Have the same problem

Video cards
SAPPHIRE Radeon™ rx480 8gb
SAPPHIRE Radeon™r9 290x
SAPPHIRE Tri-X Radeon™ R9 FURY 4G
ubuntu 16.04  64-bit
amd-gpu-pro driver

Problem exactly with Fury card. Miner stopped. Or OS freeze.
Any help? Advices?

[BeyondDeception]

I hope Claymore does a dual mining for Zcash I can't believe the recent boost in Zcash and Eth, and bitcoin for that matter.

[cracker666]

what speeds are people geting with rx 580 8gb stock pls and what is the power draw compared to r9 380

[KOVIC]

Flypool error right now, conecting US server, and payout to poloniex 0 confirmations so far, (30 mnts ago)
so......

[Socket54]

Claymores miner is reading my RX 580 as a RX 480. I have 2 RX 480's as well.  Is this normal?

[Claymore]

Claymores miner is reading my RX 580 as a RX 480. I have 2 RX 480's as well.  Is this normal?

It is normal.

[Socket54]

Claymores miner is reading my RX 580 as a RX 480. I have 2 RX 480's as well.  Is this normal?

It is normal.

Ok thank you. I just got this RX 580 in today, the XFX 580 GTR black edition.

This is on driver version: 17.4.4

After a few minutes i get the error "GPU 0 hangs in OpenCL call, exit"
In which miner then attempts to restart but doesnt.

I think, ok maybe i need to bump up the virtual memory size from 16,000 to 32,000.
Still doesn't work. Same "GPU 0 hangs in OpenCL call, exit" repeats.

So what i did then was take out the 2 RX 480's to see if it will mine on just the RX 580 which it ran fine.

What do you suppose the issue could be?

EDIT 1:Also noticed this in red on the miner just now: GPU #0 returned incorrect data! 208533

EDIT2: downclocked GPU0(RX 580 btw) to 1385, ran for longer. Then GPU1 hung up and  "GPU 1 hangs in OpenCL call, exit" occurs.
Several code colored error's occurred as well before GPU1 hung up.

EDIT 3: Seems to be a driver issue is my guess. New driver just got released folks, will download and try this 17.5.1 driver.  

[suggsy89]

Claymores miner is reading my RX 580 as a RX 480. I have 2 RX 480's as well.  Is this normal?

It is normal.

Ok thank you. I just got this RX 580 in today, the XFX 580 GTR black edition.

After a few minutes i get the error "GPU 0 hangs in OpenCL call, exit"
In which miner then attempts to restart but doesnt.

I think, ok maybe i need to bump up the virtual memory size from 16,000 to 32,000.
Still doesn't work. Same "GPU 0 hangs in OpenCL call, exit" repeats.

So what i did then was take out the 2 RX 480's to see if it will mine on just the RX 580 which it ran fine.

What do you suppose the issue could be?

EDIT 1:Also noticed this in red on the miner just now: GPU #0 returned incorrect data! 208533

EDIT2: downclocked GPU0(RX 580 btw) to 1385, ran for longer. Then GPU1 hung up and  "GPU 1 hangs in OpenCL call, exit" occurs.

Re-Install drivers

[Socket54]

Claymores miner is reading my RX 580 as a RX 480. I have 2 RX 480's as well.  Is this normal?

It is normal.

Ok thank you. I just got this RX 580 in today, the XFX 580 GTR black edition.

After a few minutes i get the error "GPU 0 hangs in OpenCL call, exit"
In which miner then attempts to restart but doesnt.

I think, ok maybe i need to bump up the virtual memory size from 16,000 to 32,000.
Still doesn't work. Same "GPU 0 hangs in OpenCL call, exit" repeats.

So what i did then was take out the 2 RX 480's to see if it will mine on just the RX 580 which it ran fine.

What do you suppose the issue could be?

EDIT 1:Also noticed this in red on the miner just now: GPU #0 returned incorrect data! 208533

EDIT2: downclocked GPU0(RX 580 btw) to 1385, ran for longer. Then GPU1 hung up and  "GPU 1 hangs in OpenCL call, exit" occurs.

Re-Install drivers

Update: I installed the new drivers(17.5.1), the errors and "hangs in OpenCL call" replicated itself in GPU 1 again.
So i decided to rework my setup, putting one RX 480 riser USB attachment in the pci-e slot 2, the RX 580 is installed in the pci-e slot without a riser 1 and the other RX 480 riser attachment in the smaller x2 slot i think its called. Now up and running smoothly for the past 30 minutes so far without any errors reported.

[BeyondDeception]

Claymores miner is reading my RX 580 as a RX 480. I have 2 RX 480's as well.  Is this normal?

It is normal.

Ok thank you. I just got this RX 580 in today, the XFX 580 GTR black edition.

After a few minutes i get the error "GPU 0 hangs in OpenCL call, exit"
In which miner then attempts to restart but doesnt.

I think, ok maybe i need to bump up the virtual memory size from 16,000 to 32,000.
Still doesn't work. Same "GPU 0 hangs in OpenCL call, exit" repeats.

So what i did then was take out the 2 RX 480's to see if it will mine on just the RX 580 which it ran fine.

What do you suppose the issue could be?

EDIT 1:Also noticed this in red on the miner just now: GPU #0 returned incorrect data! 208533

EDIT2: downclocked GPU0(RX 580 btw) to 1385, ran for longer. Then GPU1 hung up and  "GPU 1 hangs in OpenCL call, exit" occurs.

Re-Install drivers

Update: I installed the new drivers(17.5.1), the errors and "hangs in OpenCL call" replicated itself in GPU 1 again.
So i decided to rework my setup, putting one RX 480 riser USB attachment in the pci-e slot 2, the RX 580 is installed in the pci-e slot without a riser 1 and the other RX 480 riser attachment in the smaller x2 slot i think its called. Now up and running smoothly for the past 30 minutes so far without any errors reported.

I haven't tried the new 17.5.1 driver - but I was having a similar issue. Always GPU 1 - in all 4 machines that I had. It was weird. They were all RX580's and until I did this - https://bitcointalk.org/index.php?topic=1900035.0 - Once I did this driver trick using an older driver, it stopped.

[Socket54]

I will bookmark that for future reference if i end up needing it, thanks a ton.

[thew3apon]

the current version is running at the highest speed ? Most efficient or fastest, and temperature ?

[Vann]

the current version is running at the highest speed ? Most efficient or fastest, and temperature ?

Yes, this is the best Zcash miner for AMD. Nothing else even comes close.

[sikkan]

the current version is running at the highest speed ? Most efficient or fastest, and temperature ?

Yes, this is the best Zcash miner for AMD. Nothing else even comes close.

Agreed! Only time my miner stops it's because of me. The miner has never failed yet after running for weeks.

[CharNoir]

Just wonder, are there anyways to fix the opencl error or not? Ive tried to reinstall amd driver and windows, but came in nothing
This error only happen on windows or linux too?