Claymore's ZCash/BTG AMD GPU Miner v12.6 (Windows/Linux)

[Claymore]

@Claymore
Do you think your ZEC or ETH miners will be able to take full advantage of a 2048-bit memory bus or is it too wide?

I cannot predict it, need to have new cards here and test them.

[bardacuda]

Ok thanks for replying!

[mez]

@claymore

Are you planning to release a new/faster version?
Second, are you planning nvidia support? 1080TI performs wonderfull on equihash.

Thanks

[mikkowendell]

does undervolting gpu also reduce the gpu temperature?
and if gpu temperature reduce, does also reduce hashrates?
or what is the purpose of undervolting gpu?

undervolting saves power and heat.

as long as the clocks are the same you will get the same hashrate at lower power and heat.

i run my 470s at -100 and my 390s at -75

Hi there, sorry for these noob questions.

Speaking of undervolting- using watt tool or msi afterburner, it shows there the (GPU MHz and its mV) and (Memory MHz and mV).

Now If i do the undervolting, should I put the same mV for both them? or the mV of the GPU MHz got a different certain mV specific to it and the Memory MHz mV has its own too?

Sorry for these, I really wanna try to do undervolting and I need your help guys because my RX 480 hits at 77-82 C temp.

[madmartyk]

My 480s run at a constant 69 degrees, even the 390 is only running at 70.  No undervolting, standard clocks.  Just open case miner.

Hell I have been running my 280s for 3 years and have not had one fail.  Good air flow!!!

[joe50]

any way to make my shares start from 100 above whenever my system or miner reboot?
i mean total shares always start from lowest to highest when you boot up system or whenever the miner restart. is there a way i can make the total shares start lets say from 100 plus above?

i believe more total shares more money it generate.

Edited:
i noticed that whenever the shares (total shares) gets to 101 i start getting rejected shares from 1 above

i.e.  total shares: 101, rejected: 1

[ITDiver]

@Claymore, do you have in plans new version with 570/580 support?
Faces with problem on my cards, for 570/580 claymore miner works with --fanmin and -tt option very strange.
(fanmin is ignored, with -tt 50 I see 100% fan jumps to 0 in cycle every few seconds)...

[sikkan]

any way to make my shares start from 100 above whenever my system or miner reboot?
i mean total shares always start from lowest to highest when you boot up system or whenever the miner restart. is there a way i can make the total shares start lets say from 100 plus above?

i believe more total shares more money it generate.

Edited:
i noticed that whenever the shares (total shares) gets to 101 i start getting rejected shares from 1 above

i.e.  total shares: 101, rejected: 1

What are you talking about? as soon as you reset the miner the shares start at 0. That doesnt mean that your previous shares doesnt count.. 

[Castreat]

My 480s run at a constant 69 degrees, even the 390 is only running at 70.  No undervolting, standard clocks.  Just open case miner.

Hell I have been running my 280s for 3 years and have not had one fail.  Good air flow!!!

70C is very safe temperature.

[shadabahmed]

anybody mining ZCL?

[suggsy89]

My 480s run at a constant 69 degrees, even the 390 is only running at 70.  No undervolting, standard clocks.  Just open case miner.

Hell I have been running my 280s for 3 years and have not had one fail.  Good air flow!!!

70C is very safe temperature.

Check your VRM temps as well

[joe50]

any way to make my shares start from 100 above whenever my system or miner reboot?
i mean total shares always start from lowest to highest when you boot up system or whenever the miner restart. is there a way i can make the total shares start lets say from 100 plus above?

i believe more total shares more money it generate.

Edited:
i noticed that whenever the shares (total shares) gets to 101 i start getting rejected shares from 1 above

i.e.  total shares: 101, rejected: 1

What are you talking about? as soon as you reset the miner the shares start at 0. That doesnt mean that your previous shares doesnt count.. 

i know that... it seems you do not understand my questions.

[CitricAcid]

Anyone else received the blue screen of failure to executed of none executed memory yet?

[Haidong Liang]

My 480s run at a constant 69 degrees, even the 390 is only running at 70.  No undervolting, standard clocks.  Just open case miner.

Hell I have been running my 280s for 3 years and have not had one fail.  Good air flow!!!

70C is very safe temperature.

Check your VRM temps as well

If the GPU temperature is low, it is a good indication that the VRM temperature is also low.

[wa11mine]

Anyone else received the blue screen of failure to executed of none executed memory yet?

Problem happened to me on Win 10, I reinstalled win 10 and the 16.12 drivers for RX 4xx, 17.5.1 for RX 5xx.

This fixed my problem and was able to get 6 gpus running on H270-Prime PLUS.

[janamana]

@Claymore

There is no option provided to change(or pickups up max available) Computing units as it still configured for 14 CUs, however Rx 480 supports 36 CUs.
Please put some light on how to maximize the usage?

[QuintLeo]

@Claymore

Do you think your ZEC or ETH miners will be able to take full advantage of a 2048-bit memory bus or is it too wide?

#

He does not know the definite answer until the card is out.

 Fury/FuryX/Nano also had a super-wide memory bus - same width I think?

 VEGA is basically the next generation of the FURY line, similar to how the RX 4xx/5xx line are the next generation of the mid-to-upper part of the R9 lines.

 It does appear that AMD intends the VEGA generation to extend somewhat lower in their card range this time around though.

[Jaroslav2007x]

Never, remember never to update the driver and go to sleep! I updated, went to bed, and one video card burned: D

[chup]

Never, remember never to update the driver and go to sleep! I updated, went to bed, and one video card burned: D

Sorry for the loss, but this is better situation than burning in front of Your wide open eyes...

[vapourminer]

My 480s run at a constant 69 degrees, even the 390 is only running at 70.  No undervolting, standard clocks.  Just open case miner.

Hell I have been running my 280s for 3 years and have not had one fail.  Good air flow!!!

70C is very safe temperature.

Check your VRM temps as well

some cards do not display vrm temps. but if the core is cool, chances are the vrms are ok also.

edit: bad advice. see post by @Wolf0 below