wa11mine
Newbie
Offline
Activity: 10
Merit: 0
|
|
May 19, 2017, 10:18:42 PM |
|
Anyone else received the blue screen of failure to executed of none executed memory yet?
Problem happened to me on Win 10, I reinstalled win 10 and the 16.12 drivers for RX 4xx, 17.5.1 for RX 5xx. This fixed my problem and was able to get 6 gpus running on H270-Prime PLUS.
|
|
|
|
|
|
In order to achieve higher forum ranks, you need both activity points and merit points.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
janamana
Newbie
Offline
Activity: 50
Merit: 0
|
|
May 20, 2017, 01:07:03 AM |
|
@Claymore
There is no option provided to change(or pickups up max available) Computing units as it still configured for 14 CUs, however Rx 480 supports 36 CUs. Please put some light on how to maximize the usage?
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
May 20, 2017, 06:30:23 AM |
|
@Claymore
Do you think your ZEC or ETH miners will be able to take full advantage of a 2048-bit memory bus or is it too wide?
# He does not know the definite answer until the card is out. Fury/FuryX/Nano also had a super-wide memory bus - same width I think? VEGA is basically the next generation of the FURY line, similar to how the RX 4xx/5xx line are the next generation of the mid-to-upper part of the R9 lines. It does appear that AMD intends the VEGA generation to extend somewhat lower in their card range this time around though.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Jaroslav2007x
Sr. Member
Offline
Activity: 778
Merit: 291
40% is 40%
|
|
May 20, 2017, 07:03:55 AM |
|
Never, remember never to update the driver and go to sleep! I updated, went to bed, and one video card burned: D
|
|
|
|
chup
Sr. Member
Offline
Activity: 736
Merit: 262
Me, Myself & I
|
|
May 20, 2017, 07:10:50 AM |
|
Never, remember never to update the driver and go to sleep! I updated, went to bed, and one video card burned: D
Sorry for the loss, but this is better situation than burning in front of Your wide open eyes...
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4326
Merit: 3519
what is this "brake pedal" you speak of?
|
|
May 20, 2017, 12:33:27 PM Last edit: May 20, 2017, 01:57:38 PM by vapourminer |
|
My 480s run at a constant 69 degrees, even the 390 is only running at 70. No undervolting, standard clocks. Just open case miner.
Hell I have been running my 280s for 3 years and have not had one fail. Good air flow!!!
70C is very safe temperature. Check your VRM temps as well some cards do not display vrm temps. but if the core is cool, chances are the vrms are ok also.edit: bad advice. see post by @Wolf0 below
|
|
|
|
frowsiter
|
|
May 20, 2017, 12:42:42 PM |
|
Though I'm not in mining I liked your post. I did not go through all the parts however but seems to be heavenly information for miners. I'm no expert but for fury as you said updating won't work then not implement a extra ram to boost its memory consumption so that it may get faster. I'm not sure if it is really true but I read somewhere about the ram thing. It would be grateful if you correct me on my point. I will do mining someday but I'm very afraid that I will loose money on it as it is hard these days to mine coins. With your post a complete set up can be made for Claymore's ZCash AMD GPU Miner. That's a fruitful info and thanks for sharing.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4326
Merit: 3519
what is this "brake pedal" you speak of?
|
|
May 20, 2017, 01:55:52 PM |
|
some cards do not display vrm temps. but if the core is cool, chances are the vrms are ok also.
Please don't give people who don't know any better terrible advice like that - I was mining on my linux dev/test rig, Naomi, just a day ago, and had strange crashes when core was under 70C. I used one of my tools to check the temps on the VRM controller feeding the core - it was over 106C. Also, I assume that under Windows, the tools you guys have should show VRM temps on all cards except those with an NCP81022 feeding the core - because I can't get temps off it either; cheap piece of shit has no sensor. ok, i will take your word for it. edited my post above to strike out that line. guess ive been lucky. what tools do you use?
|
|
|
|
fmz89
Legendary
Offline
Activity: 1766
Merit: 1002
|
|
May 20, 2017, 04:11:01 PM |
|
how do you lower the overall temperature of the work?
For instance open the window.
Yes you can do that, and also some big fans. The best is air conditioning does undervolting gpu also reduce the gpu temperature? and if gpu temperature reduce, does also reduce hashrates? or what is the purpose of undervolting gpu? the purpose is reducing power consumption around -40% , hashrate -15%, temp -15% hope you understand what ppl mean
|
|
|
|
jeremyf327
Member
Offline
Activity: 79
Merit: 10
|
|
May 20, 2017, 08:21:10 PM |
|
any idea on the best pool to mine zec that is very profitable?
currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.
I use suprnova. zec.suprnova.cc
|
|
|
|
homi4
|
|
May 21, 2017, 01:56:34 AM |
|
Hello @Claymore,
I have problem with rx 480 and r9 nano running together. I tried driver from 16.9.2 to 17.5.2 without success. R9 nano is not wotking with default settings, but it give 340 H/s with -asm 0 -a 2. When I use 15.12 driver without rx 480, it give 430 H/s.
Can you please advice in this case? log:
07:19:38:306 cb4 args: -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3 -di 0 -ttli 71 -mport 0 07:19:38:322 cb4 07:19:38:322 cb4 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH» 07:19:38:322 cb4 є Claymore's ZCash AMD GPU Miner v12.4 є 07:19:38:322 cb4 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj 07:19:38:322 cb4 07:19:38:541 cb4 ZEC: 1 pool is specified 07:19:38:541 cb4 Main ZCash pool is eu1-zcash.flypool.org:3443 07:19:39:010 cb4 OpenCL platform: AMD Accelerated Parallel Processing 07:19:39:025 cb4 OpenCL initializing... 07:19:39:041 cb4 driver 10.0.2348.3 07:19:39:041 cb4 AMD Cards available: 1 07:19:39:041 cb4 GPU #0: Fiji, 4096 MB available, 64 compute units 07:19:39:041 cb4 GPU #0 recognized as Fury X/Nano 07:19:39:041 cb4 POOL version 07:19:39:041 cb4 b555 07:19:39:041 cb4 Platform: Windows 07:19:39:291 cb4 start building OpenCL program for GPU 0... 07:19:39:291 cb4 done 07:19:40:072 cb4 GPU #0 algorithm ASM, intensity 6 07:19:40:072 cb4 Total cards: 1 07:19:53:728 cb4 Watchdog enabled 07:19:53:728 cb4
07:19:53:744 b38 ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.12.63> port 3443 (SSL/TLS) 07:19:54:010 b38 cert subject: /OU=Domain Control Validated/OU=PositiveSSL Wildcard/CN=*.flypool.org 07:19:54:010 b38 cert issuer: /C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO RSA Domain Validation Secure Server CA 07:19:54:010 b38 SSL/TLS encryption is enabled 07:19:54:025 b38 send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "eu1-zcash.flypool.org", "3443"]}
07:19:54:025 b38 send: {"id": 2, "method": "mining.authorize", "params": ["t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3",""]}
07:19:54:025 b38 send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
07:19:54:025 b38 ZEC: Stratum - Connected (eu1-zcash.flypool.org:3443) (SSL/TLS) 07:19:54:119 b38 got 62 bytes 07:19:54:119 b38 buf: {"id":1,"result":["01a897f7c8", "01a897f7c8"], "error": null}
07:19:54:119 b38 parse packet: 58 07:19:54:119 b38 new buf size: 0 07:19:54:197 b38 got 38 bytes 07:19:54:197 b38 buf: {"id":2,"result":true, "error": null}
07:19:54:197 b38 parse packet: 35 07:19:54:197 b38 ZEC: Authorized 07:19:54:197 b38 new buf size: 0 07:19:54:197 b38 got 119 bytes 07:19:54:197 b38 buf: {"id":null,"method":"mining.set_target","params":["00083126e978d4fdf3b645a1cac083126e978d4fdf3b645a1cac083126e978d4"]}
07:19:54:213 b38 parse packet: 118 07:19:54:213 b38 Pool sets new share target: 0x00083126 (diff: 8000H) 07:19:54:213 b38 new buf size: 0 07:19:55:197 b38 got 310 bytes 07:19:55:197 b38 buf: {"id":null,"method":"mining.notify","params":["95c778c1224b3450cc69","04000000","dad1db62573444c6f48a7dc40b65b5c1b5664ca19a1f981fec5cba5300000000","90e86915accf9daf92abe61fabf7a57982e872cf2debf4d3a046b047f38e6915","0000000000000000000000000000000000000000000000000000000000000000","65502059","e096531c",true]}
07:19:55:197 b38 parse packet: 309 07:19:55:197 b38 new buf size: 0 07:20:23:885 cb4 GPU0 t=57C fan=37% 07:20:23:900 cb4 em hbt: 0, fm hbt: 94, 07:20:23:900 cb4 watchdog - thread 0, hb time 172 07:20:23:900 cb4 watchdog - thread 1, hb time 94 07:20:23:900 cb4 watchdog - thread 2, hb time 0 07:20:23:900 cb4 watchdog - thread 3, hb time 266 07:20:54:056 cb4 GPU0 t=57C fan=38% 07:20:54:072 cb4 em hbt: 0, fm hbt: 78, 07:20:54:072 cb4 watchdog - thread 0, hb time 23797 07:20:54:072 cb4 watchdog - thread 1, hb time 23703 07:20:54:072 cb4 watchdog - thread 2, hb time 23609 07:20:54:072 cb4 watchdog - thread 3, hb time 23516 07:21:24:235 cb4 GPU0 t=57C fan=37% 07:21:24:235 cb4 em hbt: 0, fm hbt: 78, 07:21:24:251 cb4 watchdog - thread 0, hb time 53984 07:21:24:251 cb4 watchdog - thread 1, hb time 53890 07:21:24:251 cb4 watchdog - thread 2, hb time 53796 07:21:24:251 cb4 watchdog - thread 3, hb time 53703 07:21:54:407 cb4 GPU0 t=57C fan=37% 07:21:54:407 cb4 em hbt: 0, fm hbt: 63, 07:21:54:422 cb4 watchdog - thread 0, hb time 84156 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 1, hb time 84062 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 2, hb time 83968 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:438 cb4 watchdog - thread 3, hb time 83875 07:21:54:438 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:55:985 cb4 Restarting OK, exit...
|
|
|
|
ayiphelmy
Copper Member
Full Member
Offline
Activity: 416
Merit: 105
|
|
May 21, 2017, 02:58:03 AM |
|
Hello @Claymore,
I have problem with rx 480 and r9 nano running together. I tried driver from 16.9.2 to 17.5.2 without success. R9 nano is not wotking with default settings, but it give 340 H/s with -asm 0 -a 2. When I use 15.12 driver without rx 480, it give 430 H/s.
Can you please advice in this case? log:
07:19:38:306 cb4 args: -zpool ssl://eu1-zcash.flypool.org:3443 -zwal t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3 -di 0 -ttli 71 -mport 0 07:19:38:322 cb4 07:19:38:322 cb4 ЙHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH» 07:19:38:322 cb4 є Claymore's ZCash AMD GPU Miner v12.4 є 07:19:38:322 cb4 ИHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHj 07:19:38:322 cb4 07:19:38:541 cb4 ZEC: 1 pool is specified 07:19:38:541 cb4 Main ZCash pool is eu1-zcash.flypool.org:3443 07:19:39:010 cb4 OpenCL platform: AMD Accelerated Parallel Processing 07:19:39:025 cb4 OpenCL initializing... 07:19:39:041 cb4 driver 10.0.2348.3 07:19:39:041 cb4 AMD Cards available: 1 07:19:39:041 cb4 GPU #0: Fiji, 4096 MB available, 64 compute units 07:19:39:041 cb4 GPU #0 recognized as Fury X/Nano 07:19:39:041 cb4 POOL version 07:19:39:041 cb4 b555 07:19:39:041 cb4 Platform: Windows 07:19:39:291 cb4 start building OpenCL program for GPU 0... 07:19:39:291 cb4 done 07:19:40:072 cb4 GPU #0 algorithm ASM, intensity 6 07:19:40:072 cb4 Total cards: 1 07:19:53:728 cb4 Watchdog enabled 07:19:53:728 cb4
07:19:53:744 b38 ZEC: Stratum - connecting to 'eu1-zcash.flypool.org' <94.23.12.63> port 3443 (SSL/TLS) 07:19:54:010 b38 cert subject: /OU=Domain Control Validated/OU=PositiveSSL Wildcard/CN=*.flypool.org 07:19:54:010 b38 cert issuer: /C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO RSA Domain Validation Secure Server CA 07:19:54:010 b38 SSL/TLS encryption is enabled 07:19:54:025 b38 send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "eu1-zcash.flypool.org", "3443"]}
07:19:54:025 b38 send: {"id": 2, "method": "mining.authorize", "params": ["t2L234JALtS81EsogZ2AYcTyK5biiPJjFDo.trg3",""]}
07:19:54:025 b38 send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
07:19:54:025 b38 ZEC: Stratum - Connected (eu1-zcash.flypool.org:3443) (SSL/TLS) 07:19:54:119 b38 got 62 bytes 07:19:54:119 b38 buf: {"id":1,"result":["01a897f7c8", "01a897f7c8"], "error": null}
07:19:54:119 b38 parse packet: 58 07:19:54:119 b38 new buf size: 0 07:19:54:197 b38 got 38 bytes 07:19:54:197 b38 buf: {"id":2,"result":true, "error": null}
07:19:54:197 b38 parse packet: 35 07:19:54:197 b38 ZEC: Authorized 07:19:54:197 b38 new buf size: 0 07:19:54:197 b38 got 119 bytes 07:19:54:197 b38 buf: {"id":null,"method":"mining.set_target","params":["00083126e978d4fdf3b645a1cac083126e978d4fdf3b645a1cac083126e978d4"]}
07:19:54:213 b38 parse packet: 118 07:19:54:213 b38 Pool sets new share target: 0x00083126 (diff: 8000H) 07:19:54:213 b38 new buf size: 0 07:19:55:197 b38 got 310 bytes 07:19:55:197 b38 buf: {"id":null,"method":"mining.notify","params":["95c778c1224b3450cc69","04000000","dad1db62573444c6f48a7dc40b65b5c1b5664ca19a1f981fec5cba5300000000","90e86915accf9daf92abe61fabf7a57982e872cf2debf4d3a046b047f38e6915","0000000000000000000000000000000000000000000000000000000000000000","65502059","e096531c",true]}
07:19:55:197 b38 parse packet: 309 07:19:55:197 b38 new buf size: 0 07:20:23:885 cb4 GPU0 t=57C fan=37% 07:20:23:900 cb4 em hbt: 0, fm hbt: 94, 07:20:23:900 cb4 watchdog - thread 0, hb time 172 07:20:23:900 cb4 watchdog - thread 1, hb time 94 07:20:23:900 cb4 watchdog - thread 2, hb time 0 07:20:23:900 cb4 watchdog - thread 3, hb time 266 07:20:54:056 cb4 GPU0 t=57C fan=38% 07:20:54:072 cb4 em hbt: 0, fm hbt: 78, 07:20:54:072 cb4 watchdog - thread 0, hb time 23797 07:20:54:072 cb4 watchdog - thread 1, hb time 23703 07:20:54:072 cb4 watchdog - thread 2, hb time 23609 07:20:54:072 cb4 watchdog - thread 3, hb time 23516 07:21:24:235 cb4 GPU0 t=57C fan=37% 07:21:24:235 cb4 em hbt: 0, fm hbt: 78, 07:21:24:251 cb4 watchdog - thread 0, hb time 53984 07:21:24:251 cb4 watchdog - thread 1, hb time 53890 07:21:24:251 cb4 watchdog - thread 2, hb time 53796 07:21:24:251 cb4 watchdog - thread 3, hb time 53703 07:21:54:407 cb4 GPU0 t=57C fan=37% 07:21:54:407 cb4 em hbt: 0, fm hbt: 63, 07:21:54:422 cb4 watchdog - thread 0, hb time 84156 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 1, hb time 84062 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:422 cb4 watchdog - thread 2, hb time 83968 07:21:54:422 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:54:438 cb4 watchdog - thread 3, hb time 83875 07:21:54:438 cb4 WATCHDOG: GPU 0 hangs in OpenCL call, exit 07:21:55:985 cb4 Restarting OK, exit...
u can't mix r9 nano with rx480 in 1 rig... that's because driver not compatible in claymore software.... u can mix r9 nano only with 390 or 390x.
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
May 21, 2017, 05:53:17 AM |
|
any idea on the best pool to mine zec that is very profitable?
currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.
I've had good luck with flypool (zcash.flypool.org).
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Estimated
Newbie
Offline
Activity: 44
Merit: 0
|
|
May 21, 2017, 08:15:13 AM |
|
any idea on the best pool to mine zec that is very profitable?
currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.
I've had good luck with flypool (zcash.flypool.org). I tried several pools. flypool is the best.
|
|
|
|
joe50
Member
Offline
Activity: 117
Merit: 63
|
|
May 21, 2017, 09:01:17 AM |
|
any idea on the best pool to mine zec that is very profitable?
currently i use minergate pool, but it seems i only get penny after a block is found within 3-4 days of mining despite zec calculator says my little hashrate of 165h/s give $1 a day but on minergate i get only penny in 3-4 days.
I've had good luck with flypool (zcash.flypool.org). thanks, already switched to flypool.
|
|
|
|
|
fredeq
Legendary
Offline
Activity: 1537
Merit: 1005
|
|
May 21, 2017, 10:53:48 AM |
|
I have a 3 slot model, but checked that it works. Just remember this is for AMD cards Only.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4326
Merit: 3519
what is this "brake pedal" you speak of?
|
|
May 21, 2017, 11:07:49 AM |
|
0k, i will take your word for it. edited my post above to strike out that line. guess ive been lucky. what tools do you use?
As I said, I wrote them myself - the closest analog to what I'm working on and polishing is WattTool for Windows, I think. Allows you to see VRM temps, set/get voltages, set/get offsets, change VRM switching frequency, and more - but WattTool can only give you this control over IR3567B and compatible VRM controllers. Mine supports four controllers that are used in AMD cards as main controllers (and sometimes this main controller is used for other purposes in the card besides core volts - for example, XFX RS 470/480 cards use the NCP81022's main output (VDD) for core (duh) but use the other one (VDDNB) for the IMC voltage (VDDCI.)) I've also added basic support for one controller that's more of a secondary one, which I found on my DirectCU II 290X. It controls MVDDC. sounds like a dangerous tool in the hands of a noob. those are the best kinds of tools IMO any chance of your releasing it at some point?
|
|
|
|
thew3apon
|
|
May 21, 2017, 03:14:58 PM |
|
I ethereu thanks to the rise of flour, provided it does not increase the difficulty is good. What is the reason for the lack of a new version in a long time ? I reached the border .
|
|
|
|
rpg
|
|
May 21, 2017, 03:53:23 PM |
|
i by mistake cross the PSU wires and fed a Fury X with power from 2 different PSUs. Now it is total dead as a brick, no fans nothing. I bought it on the net second hand and have no RMA for it. I know the Fury has a fuse on each 8 pin connector. Would the different phases cause the fuses to blow?
|
|
|
|
|