[NemosMiner] multi algo profit switching NVIDIA/CPU miner

[car1999]

Hello,Coinbase website now requires a captcha to be accessed so the miner can't get the BTC rate so i don't think it can select the best profitable algo to mine if you could please fix that or change the BTC rate source.

Thanks.

same issue, it hangs at calling coinbase api.

[jungleRogi]

Hi All

I got the following problem,what could be the problem?

Status: Failed

    Speed Active                      Launched Command
    ----- ------                      -------- -------
0,00 PH/s 00 Days 00 Hours 00 Minutes Once     Bin\NVIDIA-CcminerKlaust\ccminer.exe -a neoscrypt -o stratum+tcp://neosc
                                               rypt.mine.zpool.ca:4233 -u 16smbET6YpCn4gKoV6oJEtZyezkfiT3Ygo -p ID=GTX1
                                               0602,c=BTC -d 0,1,2,3,4,5
Seems that the following miners won't start:
NVIDIA-Alexis78cuda9
NVIDIA-CcminerKlaust

[ALTCOlNMlNER]

Can anyone of you tell me, why nemosminer shows me much much more BTC/Day then I really get? For example: The miner shows 44,604 USD/Day at moment and in the last 24h it was around 46 USD/Day. But on ahashpool, I have an income of only 32 USD for the last 24h. Is the calculation that worse or is ahashpool a scam-pool or what is going on? Anything that I dont understand?

[Isvagintojas]

Can anyone of you tell me, why nemosminer shows me much much more BTC/Day then I really get? For example: The miner shows 44,604 USD/Day at moment and in the last 24h it was around 46 USD/Day. But on ahashpool, I have an income of only 32 USD for the last 24h. Is the calculation that worse or is ahashpool a scam-pool or what is going on? Anything that I dont understand?

First of all, 24 hours is not enough. Secondly, it will be 20-30% less than calculation(at least it is for me). Think about it, price of some cheap altcoin goes up, you start mining and let's say after one hour you have enough to exchange it, but then price drops, and you get less. Look at charts at exchanges, they move really fast. But still, I can bet that you get more than mining single coin, as most of us do.
I was mining Zec on nanopool, on average getting between 20-25$ a day (6 x 1070ti), now I get close to $40 per day, even though my calculator says 55$-60$. (ahashpool24hr).
Please correct me if I'm wrong

[ALTCOlNMlNER]

Can anyone of you tell me, why nemosminer shows me much much more BTC/Day then I really get? For example: The miner shows 44,604 USD/Day at moment and in the last 24h it was around 46 USD/Day. But on ahashpool, I have an income of only 32 USD for the last 24h. Is the calculation that worse or is ahashpool a scam-pool or what is going on? Anything that I dont understand?

First of all, 24 hours is not enough. Secondly, it will be 20-30% less than calculation(at least it is for me). Think about it, price of some cheap altcoin goes up, you start mining and let's say after one hour you have enough to exchange it, but then price drops, and you get less. Look at charts at exchanges, they move really fast. But still, I can bet that you get more than mining single coin, as most of us do.
I was mining Zec on nanopool, on average getting between 20-25$ a day (6 x 1070ti), now I get close to $40 per day, even though my calculator says 55$-60$. (ahashpool24hr).
Please correct me if I'm wrong

I have to thank you for the explanation! Sounds logic for me now =)

Have a nice day =)

[squashen]

I think Palgin miner report wrong speed back to Nemos:P

I got reported 165Mh/s.
 I think the miner itself showed 1700Kh/s when the benchmark was active.

[Mike011]

Can anyone of you tell me, why nemosminer shows me much much more BTC/Day then I really get? For example: The miner shows 44,604 USD/Day at moment and in the last 24h it was around 46 USD/Day. But on ahashpool, I have an income of only 32 USD for the last 24h. Is the calculation that worse or is ahashpool a scam-pool or what is going on? Anything that I dont understand?

First of all, 24 hours is not enough. Secondly, it will be 20-30% less than calculation(at least it is for me). Think about it, price of some cheap altcoin goes up, you start mining and let's say after one hour you have enough to exchange it, but then price drops, and you get less. Look at charts at exchanges, they move really fast. But still, I can bet that you get more than mining single coin, as most of us do.
I was mining Zec on nanopool, on average getting between 20-25$ a day (6 x 1070ti), now I get close to $40 per day, even though my calculator says 55$-60$. (ahashpool24hr).
Please correct me if I'm wrong

Well, mining btx yields me about 0.00885 btc/day on 12 x 1080ti, while mining on ahash/z should yield about 0.012 btc/day. Started mining again on nemos several hours ago and this approximation is made on average for the last 9 hours times 24, so this could be wrong, but will keep you posted.

[fr4nkthetank]

Maybe you guys are switching too often.  Calculate how long the ccminer is truly off, and calculate that as a % of the time mining in a day.  You could be quite surprised with the result.

[Mike011]

I have set interval to 900. One needs to find good balance between overswitching and quickly changing algos profitability.

[millsys]

I have set interval to 900. One needs to find good balance between overswitching and quickly changing algos profitability.

I've found 900-1800 works best for my farms.  Use 120-180 for initial benchmark then adjust batch file interval setting to 900 or 1800.

[HardBlockMiner]

Here is the update from the current vs 24hr avg....  Last day or two has caused the 'current profit' to swing a little higher on avg between the two rigs at day 12.5.  I use a 900 interval to prevent constant switching.  I still like the 24hr more since it doesn't switch so much.

(8.5 day test) - 6x1070ti
Miner1 = $44.40/day (ahashpool)
Miner2 = $44.65/day (ahashpool24hr)

12.5 day test (btc 14743) - 6x1070ti
Miner1 = $41.94/day (ahashpool)
Miner2 = $40.59/day (ahashpool24hr)

I appreciate you doing this.

Has anyone tested the difference between zpool and ahashpool since the zpool update?
I started yesterday and after about 16 hours here's what I came up with.

Miner 1 - 2x1070 - .00057904 btc - ahashpool
Miner 2 - 2x1070 - .00031789 btc - zpool

These are the total earned figures not the balance which has gone through the exchange.  I was mining zpool after the update for payout in altcoins and I noticed a huge drop in my payments so I decided to set up as two rigs to see what the real difference is.  I'll keep this going until Monday to see what's going on but right now ahashpool is showing 45% higher returns that zpool which is a crazy difference.  

As of 9:00AM here I'm at:

Miner 1 - 2x1070 - 0.00147459 btc - ahashpool
Miner 2 - 2x1070 - 0.00091089 btc - zpool

That's roughly a 40 hour run time on both pools.  Zpool did better than the first 16 hours but it's still 38% less than Ahashpool.

[BitBustah]

Here is the update from the current vs 24hr avg....  Last day or two has caused the 'current profit' to swing a little higher on avg between the two rigs at day 12.5.  I use a 900 interval to prevent constant switching.  I still like the 24hr more since it doesn't switch so much.

(8.5 day test) - 6x1070ti
Miner1 = $44.40/day (ahashpool)
Miner2 = $44.65/day (ahashpool24hr)

12.5 day test (btc 14743) - 6x1070ti
Miner1 = $41.94/day (ahashpool)
Miner2 = $40.59/day (ahashpool24hr)

I appreciate you doing this.

Has anyone tested the difference between zpool and ahashpool since the zpool update?
I started yesterday and after about 16 hours here's what I came up with.

Miner 1 - 2x1070 - .00057904 btc - ahashpool
Miner 2 - 2x1070 - .00031789 btc - zpool

These are the total earned figures not the balance which has gone through the exchange.  I was mining zpool after the update for payout in altcoins and I noticed a huge drop in my payments so I decided to set up as two rigs to see what the real difference is.  I'll keep this going until Monday to see what's going on but right now ahashpool is showing 45% higher returns that zpool which is a crazy difference.  

As of 9:00AM here I'm at:

Miner 1 - 2x1070 - 0.00147459 btc - ahashpool
Miner 2 - 2x1070 - 0.00091089 btc - zpool

That's roughly a 40 hour run time on both pools.  Zpool did better than the first 16 hours but it's still 38% less than Ahashpool.

Thanks for keeping us up to date. The results are obvious, Ahash is better. I used to mine at zPool, so I already knew this major difference.
Will you do thesame test with Ahash and HR?
Curious about that outcome.


BTW, maybe this is something for you:
http://you-stupid-woman.com/yiimplogger/

[kalud]

BTW, maybe this is something for you:
http://you-stupid-woman.com/yiimplogger/

Thanks for this!

[HardBlockMiner]

Thanks for keeping us up to date. The results are obvious, Ahash is better. I used to mine at zPool, so I already knew this major difference.
Will you do thesame test with Ahash and HR?
Curious about that outcome.


BTW, maybe this is something for you:
http://you-stupid-woman.com/yiimplogger/

Thanks.  I'll take a look at that.

I'll set it up to give hashrefinery a run after I hit the min payout on zpool, unless for some reason my earnings jump through the roof there and then I'll drop ahash after I hit the min payout.  HR looks cool because of the low payout min, but it is only running about 50% of the people that ahash is so I wonder if it has enough on it to make some good money. 

[BitBustah]

BTW, maybe this is something for you:
http://you-stupid-woman.com/yiimplogger/

Thanks for this!

Yw. Let me know how it works out. Need some testers.

[Pericle13]

Hi Guys,
I get ocasionally this error on a 6xGTX1060 rig

ConvertFrom-Json : Invalid JSON primitive: .
At C:\..................\Include.ps1:32 char:55
+ ...   if (Test-Path $Path) {$Stat = Get-Content $Path | ConvertFrom-Json}
+                                                         ~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [ConvertFrom-Json], ArgumentException
    + FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand

running startahashpool24h.bat.

I have other rigs running ok on nemos miner.

Any idea?
thanks

[minerx117]

I think Palgin miner report wrong speed back to Nemos:P

I got reported 165Mh/s.
 I think the miner itself showed 1700Kh/s when the benchmark was active.

thanks i'll sort that out

[goldren]

Hi Guys,
I get ocasionally this error on a 6xGTX1060 rig

ConvertFrom-Json : Invalid JSON primitive: .
At C:\..................\Include.ps1:32 char:55
+ ...   if (Test-Path $Path) {$Stat = Get-Content $Path | ConvertFrom-Json}
+                                                         ~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [ConvertFrom-Json], ArgumentException
    + FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand

running startahashpool24h.bat.

I have other rigs running ok on nemos miner.

Any idea?
thanks

a lot of ideas on the previous pages.

[millsys]

Hi Guys,
I get ocasionally this error on a 6xGTX1060 rig

ConvertFrom-Json : Invalid JSON primitive: .
At C:\..................\Include.ps1:32 char:55
+ ...   if (Test-Path $Path) {$Stat = Get-Content $Path | ConvertFrom-Json}
+                                                         ~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: ( [ConvertFrom-Json], ArgumentException
    + FullyQualifiedErrorId : System.ArgumentException,Microsoft.PowerShell.Commands.ConvertFromJsonCommand

running startahashpool24h.bat.

I have other rigs running ok on nemos miner.

Any idea?
thanks

Its a bad txt file in the stats folder.  I usually go in there and sort by date and delete recent ones that are not the ccminer hashes, so stats for ahash,zpool,etc.  That fixes it right up.

[kalud]

BTW, maybe this is something for you:
http://you-stupid-woman.com/yiimplogger/

Thanks for this!

Yw. Let me know how it works out. Need some testers.

Working great on my end. Only had to replace a couple "<?" by "<?php" in index.php. Probably a different configuration between my server versus yours. Was showing the php code after those "<?" instead of interpreting it.

I even added a second grabber to monitor another rig. Working perfectly. Thanks for your work!