[OS] nvOC easy-to-use Linux Nvidia Mining

[papampi]

I think an 80 plus platinum PSU efficiency is around 92%
6x120 watt is on verge of your PSU limit and it's natural to give up and lose GPU.
Either lower your power limit or use higher PSU

[Muhammadaffandi10]

Wih good job to information tenk you

[urnzwy]

I think an 80 plus platinum PSU efficiency is around 92%
6x120 watt is on verge of your PSU limit and it's natural to give up and lose GPU.
Either lower your power limit or use higher PSU

I think there is some confusion here. Only 6 risers are powered by the EVGA. ALL cards (6+2) are powered by the 1400W PSU’s. 7 (6+2) on one 1400W, 6 (6+2) powered by the other 1400W. The X-11 breakout boards are connected via a Molex to the mobo so all PSU’s power on/off at the same time.

[papampi]

I think an 80 plus platinum PSU efficiency is around 92%
6x120 watt is on verge of your PSU limit and it's natural to give up and lose GPU.
Either lower your power limit or use higher PSU

I think there is some confusion here. Only 6 risers are powered by the EVGA. ALL cards (6+2) are powered by the 1400W PSU’s. 7 (6+2) on one 1400W, 6 (6+2) powered by the other 1400W. The X-11 breakout boards are connected via a Molex to the mobo so all PSU’s power on/off at the same time.

Usually lost GPU cause by high power or over clock, try to lower and find the spot with no errors, then raise slowly.

[urnzwy]

I think an 80 plus platinum PSU efficiency is around 92%
6x120 watt is on verge of your PSU limit and it's natural to give up and lose GPU.
Either lower your power limit or use higher PSU

I think there is some confusion here. Only 6 risers are powered by the EVGA. ALL cards (6+2) are powered by the 1400W PSU’s. 7 (6+2) on one 1400W, 6 (6+2) powered by the other 1400W. The X-11 breakout boards are connected via a Molex to the mobo so all PSU’s power on/off at the same time.


http://i87.photobucket.com/albums/k143/theeng72/7546E174-5033-4041-81D1-A93C7A1FC2C2_zpsfxgq9ruz.jpeg

Usually lost GPU cause by high power or over clock, try to lower and find the spot with no errors, then raise slowly.

But should't watchdog be restarting the rig on any error? It's seems the GPU crashes and it freeze's / crashes the OS as well.

Power limit is set to 125W, so essentially 85%. Core 100, Memory 475.

Rebooted the rig due to this error at 10PM, it's now 11AM and all is fine with no settings changed. The only difference is that Quake isn't opened (when the rig boot's only terminal opens and start's mining) but I usually open it to view what's going on. Obviously it is running in the background, but this is just not consistent at all so it's difficult to pinpoint.

[tomlev5]

I think an 80 plus platinum PSU efficiency is around 92%
6x120 watt is on verge of your PSU limit and it's natural to give up and lose GPU.
Either lower your power limit or use higher PSU

I think there is some confusion here. Only 6 risers are powered by the EVGA. ALL cards (6+2) are powered by the 1400W PSU’s. 7 (6+2) on one 1400W, 6 (6+2) powered by the other 1400W. The X-11 breakout boards are connected via a Molex to the mobo so all PSU’s power on/off at the same time.

I think it is best to power a GPU and its riser from the same PSU.

[bytiges]

In an attempt to maximize hashing returns, I'm trying to use SALFTER_MPH autoswitching instead of the WTM one

The issue I have with it is that it jumps too much between similar coins. This results in pool hopping and difficulty readjustment on each hop. To counter the problem, I have set a long delay between checks.

Is there a better way to set it up, and to maximize the profit ? I'm using 1070s here.

[zjloh08]

Hi,

Is changing the password for M1 allowed?

I tried changing the password and the miner will not autostart.

Thanks

[cryptotime101]

Hi All,

I am trying to use zpool's multialgo switch with nvOC but don't seem to get my head around the configuration. Do I need to type "Zpool" in Coin portion of configuration and where can I mention multi algo for zpool switching? I would appreciate if someone share the configuration file or exmaple.

Thanks,

[leenoox]

Hi,

Is changing the password for M1 allowed?

I tried changing the password and the miner will not autostart.

Thanks

Yes it is allowed and will not affect autostart. Use the command:

Code:

passwd

to change it. Reboot to confirm that miner will autostart

[cc4l]

Hi everyone, quick question

What would one use to monitor his rigs? Like let's say a rig crashes, how would you receive a notification?

Or is it just to set it to auto-reboot with something like watchdog and watch weekly logs to see if a rig crashed too often?

Thanks for the help

[tomlev5]

Hi!

I am waiting on the next stable release with v0019. v0019-1.4 was BETA and I don't know about v0019-2.0, is v0019-2.0 a stable release?

Does v0019-2.0 have all auto-updates disabled? (I would prefer to have automatic driver updates and automatic system updates disabled, I am afraid they will bring instability)

[damNmad]

Hi!

I am waiting on the next stable release with v0019. v0019-1.4 was BETA and I don't know about v0019-2.0, is v0019-2.0 a stable release?

Does v0019-2.0 have all auto-updates disabled? (I would prefer to have automatic driver updates and automatic system updates disabled, I am afraid they will bring instability)

Yes, 2.0 is the stable update.

You can download it from here

https://nvoc-mining-os.com/downloads/download-page-nvidea/

and make sure you update the miners using the script the below instructions :

(for existing users please backup your 1bash just in case)

Go to Guake :

Navigate to Downloads

cd /home/m1/Downloads

Below command downloads the update script

wget https://www.dropbox.com/s/cyo86xoqotplges/nvOC-19-2-update

Then run the update script

bash /home/m1/Downloads/nvOC-19-2-update

Credits to @papampi

[tomlev5]

I am downloading v0019-2.0.
Thank you guys (The whole team)

[gs777]

Week ago I've switched all my rigs to v0019-2.0.
It works fine nothing to complain
just a question is it possible to mine ZCL with Miningspeed pool?

[papampi]

Week ago I've switched all my rigs to v0019-2.0.
It works fine nothing to complain
just a question is it possible to mine ZCL with Miningspeed pool?

It should work fine,
Have you tested and you got into any problems?

[papampi]

Hi!

I am waiting on the next stable release with v0019. v0019-1.4 was BETA and I don't know about v0019-2.0, is v0019-2.0 a stable release?

Does v0019-2.0 have all auto-updates disabled? (I would prefer to have automatic driver updates and automatic system updates disabled, I am afraid they will bring instability)

Yes, 2.0 is the stable update.

You can download it from here

https://nvoc-mining-os.com/downloads/download-page-nvidea/

and make sure you update the miners using the script the below instructions :

(for existing users please backup your 1bash just in case)

Go to Guake :

Navigate to Downloads

cd /home/m1/Downloads

Below command downloads the update script

wget https://www.dropbox.com/s/cyo86xoqotplges/nvOC-19-2-update

Then run the update script

bash /home/m1/Downloads/nvOC-19-2-update

Credits to @papampi

Just a note.

Its better to use :

Code:

wget -N https://www.dropbox.com/s/cyo86xoqotplges/nvOC-19-2-update

In case there was an existing old update file in downloads folder, wget replace it with new one.

Keep calm and carry on mining...

[papampi]

Hi everyone, quick question

What would one use to monitor his rigs? Like let's say a rig crashes, how would you receive a notification?

Or is it just to set it to auto-reboot with something like watchdog and watch weekly logs to see if a rig crashed too often?

Thanks for the help

You can use Telegram alerts and webinfo to check your rigs.

[chem1990]

Hello, just made again an update dowloading the script and everything went fine.

Im just supreised that claymore is still 10.2 or am i missing something?

just for info.
i have another rig with nvidia cards running on another mining distro and claymore was updated to 10.4 i had no problem since then from random reboots... stable as a rock...
dont know if that is the reason but it is the only thing changed..

[papampi]

nvOC v0019-2.0 Community Release - Miner Update Script

Miners Update Script:

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/nvOC_miner_update.sh
bash /home/m1/Downloads/nvOC_miner_update.sh

Miner Versions:

Code:

Claymore                      10.6
ccminer Tpruvot               2.2.4
Bminer                        5.3.0
DSTM                          0.5.8
KlausT ccminer                8.20
KlaustT ccminer-cryptonight   2.06
Ethminer                      0.13.0
nanashi-ccminer               2.2-mod-r2	
vertminer	              1.0.2 Stable
ANXccminer 	

If you get any errors with compiled miners re-compile it on your rig with:

KlausT ccminer:

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/compile-KTccminer.sh
bash /home/m1/Downloads/compile-KTccminer.sh

KlausT ccminer cryptonight:

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/compile-KTccminer-cryptonight.sh
bash /home/m1/Downloads/compile-KTccminer-cryptonight.sh

Nanashi ccminer:

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/compile-NAccminer.sh
bash /home/m1/Downloads/compile-NAccminer.sh

Tpruvot ccminer:

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/compile-TPccminer.sh
bash /home/m1/Downloads/compile-TPccminer.sh

Vertminer:

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/compile-vertminer.sh
bash /home/m1/Downloads/compile-vertminer.sh

ASccminer:

Code:

cd /home/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_miners/master/compile-ASccminer.sh
bash /home/m1/Downloads/compile-ASccminer.sh