puwaha
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 17, 2017, 10:13:05 PM |
|
I have a question about the 2400 watt server PSUs with dual breakout boards. Is that PSU built as 2 separate PSUs in one housing, with 1200 watts allocated to each breakout board? Or is it 2400 watts that can be broken up in different amounts, ie. 800 watts on one breakout board and 1600 watts on the other breakout board? *I know you shouldn't run 2400 watts through it, I'm just keeping the math simple. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) **I am referring to this exact PSU --- http://www.parallelminer.com/product/delta-2400watt-power-supply-platinum-94-200-240v-dps-2400ab/ Thanks! It's jut one PSU, but it has two connectors, so the load is spread out between those two connectors and breakout boards. That's what I thought from looking at it, but short of tearing it apart I wasn't sure. Being able to have more then 1200 watts through one breakout board is the main issue, but it sounds like that shouldn't be an issue in this case. I wouldn't put more than 1200 watts through one of the breakout boards. Spread out the PCIe connectors across both when you set it up.
|
|
|
|
Marvell2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 17, 2017, 10:34:41 PM |
|
A big mean looking dog would keep away casual snoopers and petty burglars. Actually anything much bigger then a healthy cat will keep most sane people away. I'm not sure if that's an option for you, but a good dog is a wonderful crime deterrent.
Lol my negbors dogs are right next to my garage hard enough to sleep right now with thier barking
|
|
|
|
Elder III
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 17, 2017, 10:36:45 PM |
|
Well we have 3 GTX 1080s, 2x GTX 1080 Ti, and 1x GTX 1070 sitting on a shelf here waiting for enough time to assemble the rig. My main concern was if they draw full power at startup it would be around 1190 watts for the 6 GPUs. We may just slap the 1070 on the ATX PSU that powers the mobo... or put a GPU over on the other breakout board if need be as you said. (The other side will have a 6 x Rx 570 rig on it so there's some power to spare on that side).
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4228
Merit: 8386
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 12:48:40 AM |
|
I have a question about the 2400 watt server PSUs with dual breakout boards. Is that PSU built as 2 separate PSUs in one housing, with 1200 watts allocated to each breakout board? Or is it 2400 watts that can be broken up in different amounts, ie. 800 watts on one breakout board and 1600 watts on the other breakout board? *I know you shouldn't run 2400 watts through it, I'm just keeping the math simple. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) **I am referring to this exact PSU --- http://www.parallelminer.com/product/delta-2400watt-power-supply-platinum-94-200-240v-dps-2400ab/ Thanks! Each board can do 1900watts But the total of the two boards is 2400 or lower. So 1600 - 800 is a yes If you take a meter and use a negative from 1 side and a positive from other side You get 12 volts means the boards share the same rail. Btw there are at least two versions of the boards. I have five of these psus . They are solid
|
|
|
|
|
lanciaominer
Newbie
Offline
Activity: 46
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 03:27:30 PM |
|
A big mean looking dog would keep away casual snoopers and petty burglars. Actually anything much bigger then a healthy cat will keep most sane people away. I'm not sure if that's an option for you, but a good dog is a wonderful crime deterrent.
Lol my negbors dogs are right next to my garage hard enough to sleep right now with thier barking redirect some of your miners exhaust to them then. lol hope i won't be flamed for animal cruelty. but i feel you man if the dog barks middle of the night it really get on your nerves.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4228
Merit: 8386
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 03:53:20 PM Last edit: September 18, 2017, 04:13:29 PM by philipma1957 |
|
is your roof pitched like this? ^![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fhowtospecialist.com%2Fwp-content%2Fuploads%2F2013%2F01%2FHow-to-build-a-gazebo-roof1.jpg&t=665&c=x5WiHZbOmX5SPw) see mods below. this is 3000 cfm with the cheaper vents . you can add 2 more if needed ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FFitCUSm.png&t=665&c=pSTNhdQBNFou2Q)
|
|
|
|
Marvell2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 05:24:05 PM Last edit: September 18, 2017, 05:43:10 PM by Marvell2 |
|
@philipma1957 thats an excellent picture and yes its pitched like that but less of a slant around 50% less slant I cant risk any gap under the garage door because of the sound of the miners fans and all, Its alreay loud as hell outside with only 10 or so rigs and my goal is for a bunch of Asics and some more rigs so the less sound the better since this area is residential and metal thieves everywhere here acording to your picture I can go with six of those fans three on each side at the angles you propose for a total of 9000CFM and maybe skip the space under the door ? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimgur.com%2FDqLsgmr%3F1&t=665&c=rMzW8n8nHlK9Cw) you can see that ugly ass mast in the back here are some more pics of the build 600 amp service ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimgur.com%2F3qmGYP7%3F1&t=665&c=mqSAsPjSXj7viQ) 3 200amp panels (partially filled with 30amp 240V ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimgur.com%2FyR73rYa%3F1&t=665&c=Ai-oUjW5urODAw) 12 30 amp power receptacles (lp-30) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FAgoleNi.jpg%3F1&t=665&c=0jq_zWD9TH1aLA) thanks
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4228
Merit: 8386
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 06:52:49 PM |
|
@philipma1957 thats an excellent picture and yes its pitched like that but less of a slant around 50% less slant I cant risk any gap under the garage door because of the sound of the miners fans and all, Its alreay loud as hell outside with only 10 or so rigs and my goal is for a bunch of Asics and some more rigs so the less sound the better since this area is residential and metal thieves everywhere here acording to your picture I can go with six of those fans three on each side at the angles you propose for a total of 9000CFM and maybe skip the space under the door ? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimgur.com%2FDqLsgmr%3F1&t=665&c=rMzW8n8nHlK9Cw) you can see that ugly ass mast in the back here are some more pics of the build 600 amp service ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimgur.com%2F3qmGYP7%3F1&t=665&c=mqSAsPjSXj7viQ) 3 200amp panels (partially filled with 30amp 240V ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimgur.com%2FyR73rYa%3F1&t=665&c=Ai-oUjW5urODAw) 12 30 amp power receptacles (lp-30) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FAgoleNi.jpg%3F1&t=665&c=0jq_zWD9TH1aLA) thanks okay you can have passive vents for intake on the roof top view of roof ______________________________________ fan fan intake fan ______________________________________ fan fan intake fan ____________________________________ SO with the amount of power you want you may need 9000 cfm I use 3200 cfm for 10-13kwatts in the summer it is barely enough
|
|
|
|
Marvell2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 07:16:16 PM Last edit: September 18, 2017, 07:46:15 PM by Marvell2 |
|
@philipma1957 thats an excellent picture and yes its pitched like that but less of a slant around 50% less slant I cant risk any gap under the garage door because of the sound of the miners fans and all, Its alreay loud as hell outside with only 10 or so rigs and my goal is for a bunch of Asics and some more rigs so the less sound the better since this area is residential and metal thieves everywhere here acording to your picture I can go with six of those fans three on each side at the angles you propose for a total of 9000CFM and maybe skip the space under the door ? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FBWZy99c.jpg%3F1&t=665&c=Gk3BiOVvEJ_nwg) you can see that ugly ass mast in the back here are some more pics of the build 600 amp service ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2F3qmGYP7.jpg%3F1&t=665&c=GRUmZUWXSvUXEw) 3 200amp panels (partially filled with 30amp 240V ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FyR73rYa.jpg%3F1&t=665&c=MGqFrvDmJbPk-Q) 12 30 amp power receptacles (lp-30) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FAgoleNi.jpg%3F1&t=665&c=0jq_zWD9TH1aLA) thanks okay you can have passive vents for intake on the roof top view of roof ** fixed images ______________________________________ fan fan intake fan ______________________________________ fan fan intake fan ____________________________________ SO with the amount of power you want you may need 9000 cfm I use 3200 cfm for 10-13kwatts in the summer it is barely enough Ahh very smart man Genius, I could even use low cost supply vents right instead of passvive for intake maybe ? to help move the air along better ? here are some supply vents that are gravity based https://www.zoro.com/dayton-gravity-roof-vent-26-in-sq-base-2rb71/i/G3096956/maybe one or two of those and as a backup if we are not gettiing enough SP or air flow two of these ** edit removing this one its at 27 sones !! , two of the 14 inch ones are 7.5 sones each sound wise and add up to the same CFM so much better ** these are also downblast supply so I think these are filtered air , most downblast exhaust fans like the ones used on restarurnts filter outgoing air so I sounds to reason these should too *** removed this one too loud https://www.zoro.com/dayton-supply-vent-18-in-4yc58/i/G1196781/ those suppluy fans seem quite powerful 3600 or so CFM they might be to loaud for my build maybe a 14 inch unit or two but the CFM dropps a ton down to 1600 https://www.zoro.com/dayton-exhaust-vent-14-in-4yc89/i/G1750926/Removed as well too loud 19 sonnes heres a better one
https://www.zoro.com/dayton-supply-vent-16-in-4yc56/i/G0789792/ 16 inch $200 cheaper 2300 cfm
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 07:48:32 PM |
|
A big mean looking dog would keep away casual snoopers and petty burglars. Actually anything much bigger then a healthy cat will keep most sane people away. I'm not sure if that's an option for you, but a good dog is a wonderful crime deterrent.
Personally I dislike dogs, but a few "territorial except for family" Maine Coons I could deal with. 8-)
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 07:52:13 PM |
|
@philipma1957 thats an excellent picture and yes its pitched like that but less of a slant around 50% less slant
I cant risk any gap under the garage door because of the sound of the miners fans and all, Its alreay loud as hell outside with only 10 or so rigs and my goal is for a bunch of Asics and some more rigs so the less sound the better since this area is residential and metal thieves everywhere here
Standard gable-type fans just under the roof should work - and less worries about leakage.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Marvell2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 08:01:03 PM |
|
@philipma1957 thats an excellent picture and yes its pitched like that but less of a slant around 50% less slant
I cant risk any gap under the garage door because of the sound of the miners fans and all, Its alreay loud as hell outside with only 10 or so rigs and my goal is for a bunch of Asics and some more rigs so the less sound the better since this area is residential and metal thieves everywhere here
Standard gable-type fans just under the roof should work - and less worries about leakage. wont you have to still open holes in the roof? I still need a roofer and an electrician to install the fans , I wonder how much it costs to install 8 fans lol and two with curbs
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 08:12:10 PM |
|
Buy the fans yourself and calculate maybe 35$ an hour, 3 hours maybe + transport ? God. Damn. So much electricity coming in. wow. im pretty jealous. Its a nice project, you can browse grow-op forums too, we have similar....ventilation needs.
edit: check this old house on youtube, you can install those yourself if you are comfortable with that kind of work.
|
|
|
|
philipma1957 (OP)
Legendary
Offline
Activity: 4228
Merit: 8386
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 08:22:31 PM |
|
Buy the fans yourself and calculate maybe 35$ an hour, 3 hours maybe + transport ? God. Damn. So much electricity coming in. wow. im pretty jealous. Its a nice project, you can browse grow-op forums too, we have similar....ventilation needs.
edit: check this old house on youtube, you can install those yourself if you are comfortable with that kind of work.
yeah he has 600 amp service I have 150 the solar array has 400 but if we do the solar array expansion we will add 400+400+400 = 1200 amps. this translates to about 39kwatts in the winer and 52kwatts in the summer We could run about 200x 1080 ti's we are planning a mix 1080 ti's 1070 amd 64 amd 56 bitmain s-9 avalon 721 avalon 741 maybe some ltc or x11 or d3 asics
|
|
|
|
Marvell2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 08:30:32 PM |
|
Buy the fans yourself and calculate maybe 35$ an hour, 3 hours maybe + transport ? God. Damn. So much electricity coming in. wow. im pretty jealous. Its a nice project, you can browse grow-op forums too, we have similar....ventilation needs.
edit: check this old house on youtube, you can install those yourself if you are comfortable with that kind of work.
@fr4nkthetank , thanks for the tip? 3 hours to install six fans though? yes I am ordering the fans from zoro , they have a 20 percent discount on hvac gear. Only reason I have so much power is I got tired of paying residential rates and the heat generated by my 30 gpu rigs, as well as the constant brownouts in the summer. the power company only offered buisness demand service in my residentail zone for 500 or more amp service so I had to go big needed a city permit for a whole new pole and transformer which took three months for approval. total project cost for my electrician was 15k , which i only had. due to the spike in eth prices from feb to march
|
|
|
|
Marvell2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 08:36:18 PM |
|
Buy the fans yourself and calculate maybe 35$ an hour, 3 hours maybe + transport ? God. Damn. So much electricity coming in. wow. im pretty jealous. Its a nice project, you can browse grow-op forums too, we have similar....ventilation needs.
edit: check this old house on youtube, you can install those yourself if you are comfortable with that kind of work.
yeah he has 600 amp service I have 150 the solar array has 400 but if we do the solar array expansion we will add 400+400+400 = 1200 amps. this translates to about 39kwatts in the winer and 52kwatts in the summer We could run about 200x 1080 ti's we are planning a mix 1080 ti's 1070 amd 64 amd 56 bitmain s-9 avalon 721 avalon 741 maybe some ltc or x11 or d3 asics my god 400 amps from a solar array? thats insane how many panels did that take? thats another reason Im heaitant to install roof fans since at some point I want solar on my house roof and the garage I was told i could fit 100 panels between the house and garage , how much power could I generate with 100 solar panels? and can u raise the panels higher on the roof so it covers the vents?
|
|
|
|
Marvell2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 08:38:41 PM |
|
1080 tis would be better than Rx due to lower tdp? I really love Rx cards due to thier dual mining prowess and i dont even dual mine smh
p.s why only 52kw? are you not doing 240 or 208v ? 1200 amps at 240 would be far more power?
|
|
|
|
Elder III
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 10:54:59 PM |
|
I have a question about the 2400 watt server PSUs with dual breakout boards. Is that PSU built as 2 separate PSUs in one housing, with 1200 watts allocated to each breakout board? Or is it 2400 watts that can be broken up in different amounts, ie. 800 watts on one breakout board and 1600 watts on the other breakout board? *I know you shouldn't run 2400 watts through it, I'm just keeping the math simple. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) **I am referring to this exact PSU --- http://www.parallelminer.com/product/delta-2400watt-power-supply-platinum-94-200-240v-dps-2400ab/ Thanks! Each board can do 1900watts But the total of the two boards is 2400 or lower. So 1600 - 800 is a yes If you take a meter and use a negative from 1 side and a positive from other side You get 12 volts means the boards share the same rail. Btw there are at least two versions of the boards. I have five of these psus . They are solid That's good to know that the breakout board can support 1900 watts. I don't anticipate having anywhere near that much on it, but it's good to have an idea of their capacity. We have 3 of those PSUs in use since Spring this year and they have been excellent, we just haven't hooked up any rigs that draw enough power to have to worry about their capacity (yet). This one is in assembly now, so we'll be up to 13 rigs soon.
|
|
|
|
LoneRangir
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
September 18, 2017, 11:30:36 PM |
|
Only reason I have so much power is I got tired of paying residential rates and the heat generated by my 30 gpu rigs, as well as the constant brownouts in the summer.
the power company only offered buisness demand service in my residentail zone for 500 or more amp service so I had to go big needed a city permit for a whole new pole and transformer which took three months for approval.
total project cost for my electrician was 15k , which i only had. due to the spike in eth prices from feb to march
What is the difference between residential and commercial rate in MN?
|
|
|
|
|