[GUIDE][AMD][NVIDIA][CPU][ETN]How to Mine ⚡️Electroneum + Miners Downloads 💲⛏

[wacko]

Rx480 has samsung chips and rx580 have Hynix , but I doubt this is the issue

That's the issue right there. Samsung chips are faster, or rather people figured out the timings for those chips that result in higher hashrate than with Hynix and Elpida. This is what matters the most for Cryptonight.

I've gone to the high difficulty Port: 7777
Is this a good option?

I have the same question.  Electroneum.space offers an even higher difficulty. starting at 100,000 difficulty.  With 6x vegas I am not sure if I should be on the 7777 port or the higher one. 

This is just the starting difficulty, it doesn't matter all that much cause it'll auto-adjust to your hashing power pretty soon after the start. 7777 is the port to use for multi-gpu rigs. And 100k difficulty is for nicehash and similar services, you don't want to use that: it'll adjust automatically as well after a while, but you'll just lose some time not finding many shares (if any).

[Tao1123]

Rx480 has samsung chips and rx580 have Hynix , but I doubt this is the issue

That's the issue right there. Samsung chips are faster, or rather people figured out the timings for those chips that result in higher hashrate than with Hynix and Elpida. This is what matters the most for Cryptonight.

I've gone to the high difficulty Port: 7777
Is this a good option?

I have the same question.  Electroneum.space offers an even higher difficulty. starting at 100,000 difficulty.  With 6x vegas I am not sure if I should be on the 7777 port or the higher one. 

This is just the starting difficulty, it doesn't matter all that much cause it'll auto-adjust to your hashing power pretty soon after the start. 7777 is the port to use for multi-gpu rigs. And 100k difficulty is for nicehash and similar services, you don't want to use that: it'll adjust automatically as well after a while, but you'll just lose some time not finding many shares (if any).

I have noticed that while I am mining at the same hashrate for ETN VS XMR I seem to find fewer shares of ETN.  Is that normal?  I was under the assumption that since ETN was newer I should be finding more shares than I do in XMR.

[RealSwissMiner]

Shares have not much to do with the coins but rather the initial difficulty you are setting up. If you chose a low difficulty for your hardware you will find many shares but with less "value". Difficulty will adjust automatically to your hardware/hashrate and you will find fewer shares but with higher value.

Same you can observe on Equihash coins where you find a ton of shares at the beginning until the difficulty is adjusted.

[Brondo76]

Launch new mining pool .......the best cryptonight coin..........Electroneum  

10 Kh/s for 24 hours to give Bitcoin:

Bytecoin          0,0009
Monero           0,0019
Electroneum    0,0052

www.klondikepool.com

mine.klondikepool.com:3333

[vx0713]

hey guys, I moved one of my miners to ETN today, wanted to give it a try.

I'm getting 3200Mh with 4 RX580 which is OKayish, using Claymore miner, however after running the miner for more than an hour, nanopool shows me a really low balance, like 1.3 ETN. That's waaaay lower than whattomine's numbers.
So what's the deal? I never mined anything but ETH before. Is there a different reward system here that I should know about?

[millsys]

hey guys, I moved one of my miners to ETN today, wanted to give it a try.

I'm getting 3200Mh with 4 RX580 which is OKayish, using Claymore miner, however after running the miner for more than an hour, nanopool shows me a really low balance, like 1.3 ETN. That's waaaay lower than whattomine's numbers.
So what's the deal? I never mined anything but ETH before. Is there a different reward system here that I should know about?

Switch over to pool.electroneum.space, it's processing 20% of all hashes and finds a block every 5-10 minutes.  Getting far better ETN, about $35 USD equiv/day using 4000 H/s

[leftover_potato]

i'm trying out nanopool's etn mining using my gtx 1060 6gb amp. already downloaded and installed latest cuda (9) and followed their instruction.

but the app auto close each time. help!

[RealSwissMiner]

http://www.electroneum.space/ again down for me, classic!
The GPUS were still sending shares but their backend is not responding and I also didn't receive any coins to my wallet for roughly 400 blocks which is way too much.
Switched back to electromine.fr now.
The returns are really nice but the pool issues are a pain in the neck

[Pinusno]

http://www.electroneum.space/ again down for me, classic!
The GPUS were still sending shares but their backend is not responding and I also didn't receive any coins to my wallet for roughly 400 blocks which is way too much.
Switched back to electromine.fr now.
The returns are really nice but the pool issues are a pain in the neck

yes I got for 5 hours only rejected shares without a reason around 12h ago. I also had to switch. But more than 12 hours down is also a no go for me, too unprofessional.

[RealSwissMiner]

http://www.electroneum.space/ again down for me, classic!
The GPUS were still sending shares but their backend is not responding and I also didn't receive any coins to my wallet for roughly 400 blocks which is way too much.
Switched back to electromine.fr now.
The returns are really nice but the pool issues are a pain in the neck

yes I got for 5 hours only rejected shares without a reason around 12h ago. I also had to switch. But more than 12 hours down is also a no go for me, too unprofessional.

I encountered similar problems on all ETN pools so far. This is also why there is no such thing as a "Best Pool". Its worthwhile to setup fallback pools - but in this case the pool wasn't offline so I'm not sure if the miner switches automatically. Oh well just need to keep an eye on your current pool I guess.

[Mattthev]

http://www.electroneum.space/ again down for me, classic!
The GPUS were still sending shares but their backend is not responding and I also didn't receive any coins to my wallet for roughly 400 blocks which is way too much.
Switched back to electromine.fr now.
The returns are really nice but the pool issues are a pain in the neck

yes I got for 5 hours only rejected shares without a reason around 12h ago. I also had to switch. But more than 12 hours down is also a no go for me, too unprofessional.

You should use XMR-STAK 2.0 with multiple pool list...

[Mattthev]

Launch new mining pool .......the best cryptonight coin..........Electroneum  

10 Kh/s for 24 hours to give Bitcoin:

Bytecoin          0,0009
Monero           0,0019
Electroneum    0,0052

klondikepool.com

mine.klondikepool.com:3333

You can spam how many threads you want, but nobody will mine there. I can't even load the pool, last night i saw pool hashrate 20H/s (not kidding only H/s)

[wolverine5pl]

http://www.electroneum.space/ again down for me, classic!
The GPUS were still sending shares but their backend is not responding and I also didn't receive any coins to my wallet for roughly 400 blocks which is way too much.
Switched back to electromine.fr now.
The returns are really nice but the pool issues are a pain in the neck

yes I got for 5 hours only rejected shares without a reason around 12h ago. I also had to switch. But more than 12 hours down is also a no go for me, too unprofessional.

wasted too much time and electricity on it, was using electroneum.uax and easyhash. both great. and found new one etn.luckypool.io looks great. and no its not my. but more ppl there the better i think. starting today to test it will see. hopefully will be nice and steady

[Aldione]

i cant use SGminer, is crash when i try to open :/

Can you tell me why?

Thanks

[Mattthev]

NEW XMR-STAK 2.1!!
Not official released yet.
Some hashrate improvements.

[vectisitch]

was a bit confusing to work all this out at first so tyhis is a great thread for the newbies to get mining etn. thanks for this

[MinerPath]

Does someone here have experience with eupool.electroneum.com?

I'm mining for last ~14 hours or so using Claymore, and when I go to stats I can see:

Last share submitted: less than a minute ago.
Hash Rate: 1.5KH/sec
Total Hashes Submitted: 55 millions

but:

Pending Balance: 0.00 ETN
Total Paid: 0.00 ETN

any ideas?

[RealSwissMiner]

Does someone here have experience with eupool.electroneum.com?

I'm mining for last ~14 hours or so using Claymore, and when I go to stats I can see:

Last share submitted: less than a minute ago.
Hash Rate: 1.5KH/sec
Total Hashes Submitted: 55 millions

but:

Pending Balance: 0.00 ETN
Total Paid: 0.00 ETN

any ideas?

Did the pool find a block during the last 14 hours? Seems to be the only logical explanation if the pool correctly shows your submitted shares.

[millsys]

http://www.electroneum.space/ again down for me, classic!
The GPUS were still sending shares but their backend is not responding and I also didn't receive any coins to my wallet for roughly 400 blocks which is way too much.
Switched back to electromine.fr now.
The returns are really nice but the pool issues are a pain in the neck

This happened to me as well but it sent me a huge 135 payout.  So far 508 ETN in 24 hours!

[MinerPath]

Does someone here have experience with eupool.electroneum.com?

I'm mining for last ~14 hours or so using Claymore, and when I go to stats I can see:

Last share submitted: less than a minute ago.
Hash Rate: 1.5KH/sec
Total Hashes Submitted: 55 millions

but:

Pending Balance: 0.00 ETN
Total Paid: 0.00 ETN

any ideas?

Did the pool find a block during the last 14 hours? Seems to be the only logical explanation if the pool correctly shows your submitted shares.

Hmm, you could be right. When I go to pool page it says "Block found every 3 hours(estimate)", but it didn't found a new block for 12 hours or so. Still, I was mining two hours before finding the previous block, and my balance is 0.00, so I'm not sure what to do.

I guess I'll switch to another pool and wait for new block on eupool to see if my balance will get updated.