blissz (OP)
|
|
December 18, 2017, 07:48:25 PM |
|
Hi @blissz... hi folks...
What is maximun Hr/s that i can expect at lowest power consumpion (750/800w) with latest blissz release?
It really depends per unit. I would say it varies between 15 and 17 Gh/s
|
|
|
|
zerp86
Newbie
Offline
Activity: 50
Merit: 0
|
|
December 18, 2017, 08:13:34 PM |
|
hi blissz.. can i know this one still valid? dont know of this hw error okay or not. this setting i just want to keep my temp under 80 and get little low voltage than before .. i got around 900watt for this 17.7k ghz https://imgur.com/yoGj0Ud
|
|
|
|
HavenZone
Jr. Member
Offline
Activity: 37
Merit: 1
|
|
December 18, 2017, 08:14:38 PM |
|
Hi @blissz... hi folks...
What is maximun Hr/s that i can expect at lowest power consumpion (750/800w) with latest blissz release?
I'm running 16.6GH at 900W
|
|
|
|
clyjr
Newbie
Offline
Activity: 50
Merit: 0
|
|
December 18, 2017, 10:47:57 PM |
|
Anyone have any idea how to keep Priviliged API access in Awesome miner? If I reboot the D3 using the web page it comes back with Restricted API access, and then you have to Configure API access in antminer again, which causes another reboot. Annoying when messing with settings...
|
|
|
|
CikoXp
Newbie
Offline
Activity: 19
Merit: 0
|
|
December 18, 2017, 11:05:00 PM |
|
Hi @blissz... hi folks...
What is maximun Hr/s that i can expect at lowest power consumpion (750/800w) with latest blissz release?
I'm running 16.6GH at 900W Great! I think it's a good compromise to do some altcoins... i'll try blissz firmware. Anyone have any idea how to keep Priviliged API access in Awesome miner? If I reboot the D3 using the web page it comes back with Restricted API access, and then you have to Configure API access in antminer again, which causes another reboot. Annoying when messing with settings...
Privileged API Access on Antminers it's a built in feature of Awesome Miner. I think u know how to unlock this feature, but remember to reboot miners only via AWMiner... rebooting on browser web page resets the default Restricted API Access. Ther's no way to keep Privileged API Access using both interfaces. Manage your Antminers on web page (with Restricted AWMiner features)... or manage them only via AWMiner keeping Privileged API Access.
|
|
|
|
jojo6865
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 18, 2017, 11:09:13 PM |
|
Does anyone happen to have a copy of the 02/12 firmware i upgraded and my D3's do not seem to like the new version
|
|
|
|
lashatatu
|
|
December 18, 2017, 11:23:26 PM |
|
Does anyone happen to have a copy of the 02/12 firmware i upgraded and my D3's do not seem to like the new version
check first post
|
|
|
|
jojo6865
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 18, 2017, 11:34:45 PM |
|
Yeah the only one on the main page is the latest one i am looking for the 02/12 one
|
|
|
|
lashatatu
|
|
December 18, 2017, 11:37:25 PM |
|
Yeah the only one on the main page is the latest one i am looking for the 02/12 one sorry thought u were looking for 10/12 i assumed that u updated for beta test
|
|
|
|
|
clyjr
Newbie
Offline
Activity: 50
Merit: 0
|
|
December 19, 2017, 12:21:13 AM |
|
Hi @blissz... hi folks...
What is maximun Hr/s that i can expect at lowest power consumpion (750/800w) with latest blissz release?
I'm running 16.6GH at 900W Great! I think it's a good compromise to do some altcoins... i'll try blissz firmware. Anyone have any idea how to keep Priviliged API access in Awesome miner? If I reboot the D3 using the web page it comes back with Restricted API access, and then you have to Configure API access in antminer again, which causes another reboot. Annoying when messing with settings...
Privileged API Access on Antminers it's a built in feature of Awesome Miner. I think u know how to unlock this feature, but remember to reboot miners only via AWMiner... rebooting on browser web page resets the default Restricted API Access. Ther's no way to keep Privileged API Access using both interfaces. Manage your Antminers on web page (with Restricted AWMiner features)... or manage them only via AWMiner keeping Privileged API Access. Yeah, I meant to say "you have to Configure API access in Awesome Miner again", not in antminer. That sucks that you can't reboot using the web page, if you want to test out new settings I guess just use the web page until it's stable, then configure the access again in Awesome Miner when you are happy with the settings. Minor annoyance I guess...
|
|
|
|
|
jojo6865
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 19, 2017, 12:46:00 AM |
|
Thanks so much exactly what i needed
|
|
|
|
LiteMine
|
|
December 19, 2017, 01:44:20 AM |
|
One of my D3's will only load the main page (with nothing on it) and won't let me go to any other pages to reboot or flash, etc. I tried the reset with a paperclip, but no go. Any ideas? Thank you
|
|
|
|
rageprone
Newbie
Offline
Activity: 28
Merit: 0
|
|
December 19, 2017, 02:38:43 AM |
|
My antminer D3 has no micro SD card slot! is that normal?
|
|
|
|
Knightslugger
Newbie
Offline
Activity: 19
Merit: 0
|
|
December 19, 2017, 03:14:24 AM |
|
My antminer D3 has no micro SD card slot! is that normal?
it's in the back facing the hashing boards on the controller board.
|
|
|
|
martyshmoo
Newbie
Offline
Activity: 56
Merit: 0
|
|
December 19, 2017, 04:04:24 AM |
|
One of my D3's will only load the main page (with nothing on it) and won't let me go to any other pages to reboot or flash, etc. I tried the reset with a paperclip, but no go. Any ideas? Thank you
I think, That page is probably a cached page. The real page probably switched ip address. You will have to find it again. Important, some routers assign LAN and Wifi separately and it IS POSSIBLE your laptop is on the same ip as the rebooted d3. I set my router to always assign the Miner to like a higher address so it never gets mixed with them. (DMZ). M
|
|
|
|
drawer
Newbie
Offline
Activity: 60
Merit: 0
|
|
December 19, 2017, 04:22:57 AM |
|
There is more need option , which shoudl be in firmware - auto reeboot if temp high on chip ! I don't know how, but after reboot sometimes chip temp got already 100 + stp....Need to reboot again, till temp on chip set up stable under 85 stp...
|
|
|
|
LiteMine
|
|
December 19, 2017, 05:00:58 AM |
|
One of my D3's will only load the main page (with nothing on it) and won't let me go to any other pages to reboot or flash, etc. I tried the reset with a paperclip, but no go. Any ideas? Thank you
I think, That page is probably a cached page. The real page probably switched ip address. You will have to find it again. Important, some routers assign LAN and Wifi separately and it IS POSSIBLE your laptop is on the same ip as the rebooted d3. I set my router to always assign the Miner to like a higher address so it never gets mixed with them. (DMZ). M Many thanks, I just had to go find it!
|
|
|
|
zerp86
Newbie
Offline
Activity: 50
Merit: 0
|
|
December 19, 2017, 05:59:04 AM |
|
i already setting using recommend blissz fw and got 950watt with 17.700mhs my temp also cool down to 78 below.. before my d3 temp around 85-90 will try to setting another 10 d3..
|
|
|
|
|