Antminer D3 Blissz firmware (10/12 v1.12 update)

[blissz]

Hi @blissz... hi folks...

What is maximun Hr/s that i can expect at lowest power consumpion (750/800w) with latest blissz release?

It really depends per unit. I would say it varies between 15 and 17 Gh/s

[zerp86]

hi blissz..
can i know this one still valid?
dont know of this hw error okay or not.
this setting i just want to keep my temp under 80 and get little low voltage than before ..
i got around 900watt for this 17.7k ghz


https://imgur.com/yoGj0Ud

[HavenZone]

Hi @blissz... hi folks...

What is maximun Hr/s that i can expect at lowest power consumpion (750/800w) with latest blissz release?

I'm running 16.6GH at 900W

[clyjr]

Anyone have any idea how to keep Priviliged API access in Awesome miner?  If I reboot the D3 using the web page it comes back with Restricted API access, and then you have to Configure API access in antminer again, which causes another reboot.  Annoying when messing with settings...

[CikoXp]

Hi @blissz... hi folks...

What is maximun Hr/s that i can expect at lowest power consumpion (750/800w) with latest blissz release?

I'm running 16.6GH at 900W

Great! I think it's a good compromise to do some altcoins... i'll try blissz firmware.

Anyone have any idea how to keep Priviliged API access in Awesome miner?  If I reboot the D3 using the web page it comes back with Restricted API access, and then you have to Configure API access in antminer again, which causes another reboot.  Annoying when messing with settings...

Privileged API Access on Antminers it's a built in feature of Awesome Miner. I think u know how to unlock this feature, but remember to reboot miners only via AWMiner... rebooting on browser web page resets the default Restricted API Access. Ther's no way to keep Privileged API Access using both interfaces. Manage your Antminers on web page (with Restricted AWMiner features)... or manage them only via AWMiner keeping Privileged API Access.

[jojo6865]

Does anyone happen to have a copy of the 02/12 firmware i upgraded and my D3's do not seem to like the new version

[lashatatu]

Does anyone happen to have a copy of the 02/12 firmware i upgraded and my D3's do not seem to like the new version

check first post

[jojo6865]

Yeah the only one on the main page is the latest one i am looking for the 02/12 one

[lashatatu]

Yeah the only one on the main page is the latest one i am looking for the 02/12 one

sorry thought u were looking for 10/12

i assumed that u updated for beta test

[remear]

jojo6865 - I put my copy of Antminer-D3-20171202_0-blissz.tar.gz at https://drive.google.com/file/d/1WOMsmBXoJXIFvcHJdiw1WtLYDoSaUEX0/view

Hope that helps.

[clyjr]

Hi @blissz... hi folks...

What is maximun Hr/s that i can expect at lowest power consumpion (750/800w) with latest blissz release?

I'm running 16.6GH at 900W

Great! I think it's a good compromise to do some altcoins... i'll try blissz firmware.

Anyone have any idea how to keep Priviliged API access in Awesome miner?  If I reboot the D3 using the web page it comes back with Restricted API access, and then you have to Configure API access in antminer again, which causes another reboot.  Annoying when messing with settings...

Privileged API Access on Antminers it's a built in feature of Awesome Miner. I think u know how to unlock this feature, but remember to reboot miners only via AWMiner... rebooting on browser web page resets the default Restricted API Access. Ther's no way to keep Privileged API Access using both interfaces. Manage your Antminers on web page (with Restricted AWMiner features)... or manage them only via AWMiner keeping Privileged API Access.

Yeah, I meant to say "you have to Configure API access in Awesome Miner again", not in antminer.   
That sucks that you can't reboot using the web page, if you want to test out new settings I guess just use the web page until it's stable, then configure the access again in Awesome Miner when you are happy with the settings.  Minor annoyance I guess...

[mikespax]

For everyone talking about AwesomeMiner here. I again want to suggest this open source and free alternative:

https://github.com/anselal/antminer-monitor

Killer feature is that you can add in email alerts when a miner is down or too hot, or chips are missing, etc.

I was able to code in the email stuff following this: https://github.com/anselal/antminer-monitor/issues/19

I'd be happy to assist anyone with getting their stuff up to speed on this.

[jojo6865]

jojo6865 - I put my copy of Antminer-D3-20171202_0-blissz.tar.gz at https://drive.google.com/file/d/1WOMsmBXoJXIFvcHJdiw1WtLYDoSaUEX0/view

Hope that helps.

Thanks so much exactly what i needed

[LiteMine]

One of my D3's will only load the main page (with nothing on it) and won't let me go to any other pages to reboot or flash, etc. I tried the reset with a paperclip, but no go. Any ideas? Thank you

[rageprone]

My antminer D3 has no micro SD card slot! is that normal?

[Knightslugger]

My antminer D3 has no micro SD card slot! is that normal?

it's in the back facing the hashing boards on the controller board.

[martyshmoo]

One of my D3's will only load the main page (with nothing on it) and won't let me go to any other pages to reboot or flash, etc. I tried the reset with a paperclip, but no go. Any ideas? Thank you

I think,

That page is probably a cached page.

The real page probably switched ip address.

You will have to find it again.

Important, some routers assign LAN and Wifi separately and it IS POSSIBLE your laptop is on the same ip as the rebooted d3.

I set my router to always assign the Miner to like a higher address so it never gets mixed with them. (DMZ).

M

[drawer]

There is more need option , which shoudl be in firmware - auto reeboot if temp high on chip !
I don't know how, but after reboot sometimes chip temp got already 100 + stp....Need to reboot again, till temp on chip set up stable under 85 stp...

[LiteMine]

One of my D3's will only load the main page (with nothing on it) and won't let me go to any other pages to reboot or flash, etc. I tried the reset with a paperclip, but no go. Any ideas? Thank you

I think,

That page is probably a cached page.

The real page probably switched ip address.

You will have to find it again.

Important, some routers assign LAN and Wifi separately and it IS POSSIBLE your laptop is on the same ip as the rebooted d3.

I set my router to always assign the Miner to like a higher address so it never gets mixed with them. (DMZ).

M

Many thanks, I just had to go find it!

[zerp86]

i already setting using recommend blissz fw and got 950watt with 17.700mhs
my temp also cool down to 78 below.. before my d3 temp around 85-90
will try to setting another 10 d3..