[ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29z miner for AMD/NVIDIA GPUs 16.4.9

[miner32342]

We’re pleased to release Bminer 8.0.0. The release provides supports for dual mining Ethereum with blake2s(Verge)/blake14r(Decred) algorithm coins.

Please see https://www.bminer.me for more details.

Happy mining!

Failed to retrieve temperature from GPU 0

[karen0929]

We’re pleased to release Bminer 8.0.0. The release provides supports for dual mining Ethereum with blake2s(Verge)/blake14r(Decred) algorithm coins.

Please see https://www.bminer.me for more details.

Happy mining!

Failed to retrieve temperature from GPU 0

what coin are you mining?

[supermoew]

We’re pleased to release Bminer 8.0.0. The release provides supports for dual mining Ethereum with blake2s(Verge)/blake14r(Decred) algorithm coins.

Please see https://www.bminer.me for more details.

Happy mining!

This is cool!

Bminer supports dual mining mode - mining Ethash-based coins (e.g. Ethereum) and Blake14r-based coins (e.g. Decred) / Blake2s-based coins (e.g. Verge) at the same time. Devfee for the dual mining mode is 1.3%, and the second coin (e.g. Decred/Verge) is mined without devfee.

Ethash mining on GTX 1080Ti stock settings (power: 250 W):

With OhGodAnETHlargementPill: 46.7 MH/s
Without OhGodAnETHlargementPill: 32.2 MH/s

Dual mining using automatic tuning (default) on GTX 1080Ti stock settings (power: 250 W):

With OhGodAnETHlargementPill:
ETH 46 MH/s and DCR 1000 MH/s
ETH 46 MH/s and XVG 1770 MH/s

Without OhGodAnETHlargementPill:
ETH 32 MH/s and DCR 2200 MH/s
ETH 32 MH/s and XVG 3750 MH/s

[Vokas123]

We’re pleased to release Bminer 8.0.0. The release provides supports for dual mining Ethereum with blake2s(Verge)/blake14r(Decred) algorithm coins.

Please see https://www.bminer.me for more details.

Happy mining!

With OhGodAnETHlargementPill:
ETH 46 MH/s and DCR 1000 MH/s
ETH 46 MH/s and XVG 1770 MH/s

So, you get more or less good hashrate for Ethash and 1/4th of the hashrate for the other algo (with enlargment pill).
Could be interseting for farms, not sure about small miners.

[snovik]

I am having 53.3 mh/s on 1080ti with power at 180W with the free (!!!) ethminer

what is the point of developing ethash that is far inferior to existing free ones?

[Watjila]

I am having 53.3 mh/s on 1080ti with power at 180W with the free (!!!) ethminer

what is the point of developing ethash that is far inferior to existing free ones?

This one can do dual mining. Is that the reason?

[Jaerun]

I'm seeing bad performance on Equihash for 1080 TIs with the same settings I previously used.  It went from 800-820 (Bminer 6.1 & 7.0) to 790-805 (Bminer 8.0).  Am I missing something?

[realbminer]

I'm seeing bad performance on Equihash for 1080 TIs with the same settings I previously used.  It went from 800-820 (Bminer 6.1 & 7.0) to 790-805 (Bminer 8.0).  Am I missing something?

We didn't change anything for Equihash mining. Can you provide us your current setting so that we can give it a try?

[realbminer]

We’re pleased to release Bminer 8.0.0. The release provides supports for dual mining Ethereum with blake2s(Verge)/blake14r(Decred) algorithm coins.

Please see https://www.bminer.me for more details.

Happy mining!

Failed to retrieve temperature from GPU 0

Hi, thanks for your feedback, Would you please give me more information such as log and command line?
since I can't diagnose until it re-appear to me.
thank you very much!

[Spiffy_1]

I for one, would like to see 13 cards supported with bminer.  I'm currently running the asrock pro h110 btc with a mixture of 1060's and 1070's and it will not run.  Just hard closes immediately upon launching.  This rig runs 13 cards just fine with efbw, dstm, claymore, phoenixminer and a lot of others, so it must just be a simple fix to enable.  My fees await your fix

Thanks for your feedback. Are you running on Windows? If possible, can you provide us more information, e.g. the total memory of your machine and the memory usage of Bminer before the error appears? This will help us further investigate this issue.

I am using windows 10, and have 8 Gb of ram, and 64 gig swapfile (just in case).  Windows is updated as of March 1 2018 and so is the nvidia drivers around the same time.  There is no memory usage.  It launches the miner, and then immediately closes.  I've triple checked the bat file and verified it is the same one that I'm using on 3 other rigs with the exception of the rig name.  Sorry for the late reply, I've been away.

Batch file is as follows:

@echo OFF

REM Change the following address to your Zcash taddr.

SET ADDRESS=t1X8Ho1ZC7y6jxWb46n8ai9HHxfGedMu4fv

SET USERNAME=%ADDRESS%.1060x13



SET POOL=us1-zcash.flypool.org:3333

SET SCHEME=stratum

START "Bminer: When Crypto-mining Made Fast" bminer.exe -uri %SCHEME%://%USERNAME%@%POOL% -api 127.0.0.1:1880

EDIT:  Either version 8 fixes the problem, or I had a space after my zcash address and it was throwing a fit because of that.  I re-entered my address by hand instead of copying and it seems to be running.

[sandinthebones]

I am having 53.3 mh/s on 1080ti with power at 180W with the free (!!!) ethminer

what is the point of developing ethash that is far inferior to existing free ones?

53.3 mh/s on stock or oc?

[digifarm]

We just switched all our mining program to Bminer.

I personally am extremely happy with the switch.

Pool: ViaBtc
OS: Simplemining
Mining: Zcash

Previously we were facing random restarting and SSL error using dstm. After switching to Bminer, almost everything is stable.

Hashrate is def better with no random resetting etc.



Keep up the great work!

[Keko Fdez]

For realbminer

I have downloaded Bminer 8.0 for dual mining ETH and XVG. I have a rig with 6 GTX 1070 Ti and so far running for 20 minutes this are the results using the OhgodanETHLARGEMENTPILL:

177 MH/S mining ETH and 0 MH/S on XVG. That’s an average 29,5 MH/S per card.  It doesn’t seem to be doing anything on XVG and I keep getting a message setting intensity to 0.

Can’t load pics now I’m posting from my phone.

Any idea on why this could be?? Card setting are 70% TDP, +200 clock and +700 memory.

I have used claymore before and mining at 193 MH/s so so far this is slower but haven’t tried without the ohgodanETGlargementPill

Edit: I know the ohgodanETHlargementPill is only for 1080, 1080 Ti and Titan Xp but tried it anyway with GTX 1070 Ti to see if it does something or not

[Keko Fdez]

Also, I do not know if someone notice it or not but 1770 MH/S on XVG or 3750 MH/S without the ohgodanETHlargementPill mining hashrate on blake2s algorithm for XVG is around 7400$ profit per month or 15900$ respectively...

Sounds to much for me. I have checked it using cryptotomine.com so unless the website doesn’t know what they are taking about (which could be) those numbers realbminer posted are missing a dot.

What do you guys think or get using dual mining???

[Keko Fdez]

I for one, would like to see 13 cards supported with bminer.  I'm currently running the asrock pro h110 btc with a mixture of 1060's and 1070's and it will not run.  Just hard closes immediately upon launching.  This rig runs 13 cards just fine with efbw, dstm, claymore, phoenixminer and a lot of others, so it must just be a simple fix to enable.  My fees await your fix

Thanks for your feedback. Are you running on Windows? If possible, can you provide us more information, e.g. the total memory of your machine and the memory usage of Bminer before the error appears? This will help us further investigate this issue.

I am using windows 10, and have 8 Gb of ram, and 64 gig swapfile (just in case).  Windows is updated as of March 1 2018 and so is the nvidia drivers around the same time.  There is no memory usage.  It launches the miner, and then immediately closes.  I've triple checked the bat file and verified it is the same one that I'm using on 3 other rigs with the exception of the rig name.  Sorry for the late reply, I've been away.

Batch file is as follows:

@echo OFF

REM Change the following address to your Zcash taddr.

SET ADDRESS=t1X8Ho1ZC7y6jxWb46n8ai9HHxfGedMu4fv

SET USERNAME=%ADDRESS%.1060x13



SET POOL=us1-zcash.flypool.org:3333

SET SCHEME=stratum

START "Bminer: When Crypto-mining Made Fast" bminer.exe -uri %SCHEME%://%USERNAME%@%POOL% -api 127.0.0.1:1880

EDIT:  Either version 8 fixes the problem, or I had a space after my zcash address and it was throwing a fit because of that.  I re-entered my address by hand instead of copying and it seems to be running.

I had the same problem but with dual ETH and XVG. The way it worked for me was changing the main line below after the Bminer.exe to look like this:

bminer.exe -uri ethash://eth address.worker name@your pool:port -uri 2 blake2s://xvg address.worker name@pool:port

Try it and let us know if it works

[karen0929]

Also, I do not know if someone notice it or not but 1770 MH/S on XVG or 3750 MH/S without the ohgodanETHlargementPill mining hashrate on blake2s algorithm for XVG is around 7400$ profit per month or 15900$ respectively...

Sounds to much for me. I have checked it using cryptotomine.com so unless the website doesn’t know what they are taking about (which could be) those numbers realbminer posted are missing a dot.

What do you guys think or get using dual mining???

Do you use Gh/s or Mh/s? it seems that you may calculated by Gh/s so the profit looks pretty high.

[gettilee]

Also, I do not know if someone notice it or not but 1770 MH/S on XVG or 3750 MH/S without the ohgodanETHlargementPill mining hashrate on blake2s algorithm for XVG is around 7400$ profit per month or 15900$ respectively...

Sounds to much for me. I have checked it using cryptotomine.com so unless the website doesn’t know what they are taking about (which could be) those numbers realbminer posted are missing a dot.

What do you guys think or get using dual mining???

i think bminer is way too late late to dual mining. enlargmentpill makes eth mining worthwhile for 1080x users, but throwing another algo in there is more electricity use for less eth. i woulidn't touch it, especially for the higher dev fee. stick with claymore and a dev fee remover for strictly ethereum mining if thats what you're after.

[Keko Fdez]

Also, I do not know if someone notice it or not but 1770 MH/S on XVG or 3750 MH/S without the ohgodanETHlargementPill mining hashrate on blake2s algorithm for XVG is around 7400$ profit per month or 15900$ respectively...

Sounds to much for me. I have checked it using cryptotomine.com so unless the website doesn’t know what they are taking about (which could be) those numbers realbminer posted are missing a dot.

What do you guys think or get using dual mining???

Do you use Gh/s or Mh/s? it seems that you may calculated by Gh/s so the profit looks pretty high.

I have used MH/S and just did the calculation again before this post and got the same numbers. I just think that web site is not really updated or accurate because same calculation in whattomine with blake2s algo is around -58$

[Keko Fdez]

Also, I do not know if someone notice it or not but 1770 MH/S on XVG or 3750 MH/S without the ohgodanETHlargementPill mining hashrate on blake2s algorithm for XVG is around 7400$ profit per month or 15900$ respectively...

Sounds to much for me. I have checked it using cryptotomine.com so unless the website doesn’t know what they are taking about (which could be) those numbers realbminer posted are missing a dot.

What do you guys think or get using dual mining???

i think bminer is way too late late to dual mining. enlargmentpill makes eth mining worthwhile for 1080x users, but throwing another algo in there is more electricity use for less eth. i woulidn't touch it, especially for the higher dev fee. stick with claymore and a dev fee remover for strictly ethereum mining if thats what you're after.

I agree. I mine ZEC si not bothered about ETH unless someone releases a pill for the 1070 Ti then it might be more profitable than ZEC but right now it is not the case

[karen0929]

We’re pleased to release Bminer 8.0.0. The release provides supports for dual mining Ethereum with blake2s(Verge)/blake14r(Decred) algorithm coins.

Please see https://www.bminer.me for more details.

Happy mining!

We just switched our mining program to Bminer.

I personally am extremely happy with the switch.

Pool: nanopool
OS: win10
Mining: Zec

Keep up the great work!