[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[FoBoT]

So basically 150 days max coin mining?

on gpu, i think yes. then cpu will be better, as i understand it

[1715608425]

1715608425

[1715608425]

1715608425

[dooman13]

You have 20 rigs running? Each with 6 R9 290's? Man am I jealous.

I've got 6 running now with 4 x R9 280x's each. In the process of building 12 more. Have everything but the GPU's at the moment. Its difficult to come by 48 at a reasonable price. The gouging is killing me!

I am not so jealous , the mining rigs I was renting ran 270 / 280's

the 280's were doing numbers pretty close to 290's on SJ and I paid top $ for my R9's due to supply and demand


UTC launch was a disaster . PSU's kept blowing up because my shipment of brand named PSU's was delayed and did not make it for the UTC weekend start I got them following monday so missed a few days of low difficulty but I also had rented around 100 MH/s worth of rigs

ThermalTake 450W Toughpower Power Express
( what I am using for each card atm 2x 30 amp rails 1 rail 6 pin 1 rail 8 pin its interesting watching PSU's as they show what rail is being used power drained from 6 pin first them the extra oomf from 8 pin )
ThermalTake 650W Toughpower Power Express
( what I am using trialing Twin air cooled R9 290's still not game to OC as it might hit its limits if it wasn't so hot I would un cap them from their 900 mhz limit to default speed around 940 but due to temp pointless they sit around 73 deg 700 mhz 280 kh/s 170watts each aircooled  )

those are dedicated 12V GPU PSU's   
 the towns generic 550watt ~ 1100watt literally were blowing up running 1x card  500 watts dieing in seconds the 1000+ watt lasted 1 minute running 2x R9's

the 450's are pretty efficient the 650 is inefficient with 2x cards unsure if they are worth while for 1x card tho :S but only like $15 diff between 450 and 650 versions



also using asrocks BTC mainboard 6x GPU's a breeze with SMOS
( tho working on a netboot cause thumbsticks are dying for some reason )
http://www.asrock.com/mb/intel/h81%20pro%20btc/

thankfully I got mine pre ordered before the price hike seen them going for $300+ mark and I paied under $100 like $60 - $80 range

damn..well im jealous of the both of you.

[wing_hk]

Just find in twitter that now we can buy sex toy with UTC  

http://www.cryptosextoys.com/

Great job by bumface?

[funnyking]

https://www.evernote.com/shard/s277/sh/53a49aaf-b5b4-4635-b806-22f82c5524f5/3acceb1ffcf929fd5c724f7adcc78aa1/res/0c35cdef-2a09-4e8f-9242-710ed0e8430c/skitch.jpg

[dooman13]

https://www.evernote.com/shard/s277/sh/53a49aaf-b5b4-4635-b806-22f82c5524f5/3acceb1ffcf929fd5c724f7adcc78aa1/res/0c35cdef-2a09-4e8f-9242-710ed0e8430c/skitch.jpg

this isnt a crypto-trade site?

[weblog]

Signup to QoinPro : a multi-coin faucet with wallet-like features giving different free coins (Bitcoin, Litecoin, Feathercoin, etc) on a daily basis to all subscribed members.

=> QoinPro

And Ask them to add UTC @QoinPro:

http://team-elur.com/qoinpro.png

[lagur]

Running few 280x and getting a lot of HW errors.

So I need to use -I 12 to HW:0

Now my 280x hash rate is 290 Kh/s

Am I missing something?

[noobyonekenobi]

Running few 280x and getting a lot of HW errors.

So I need to use -I 12 to HW:0

Now my 280x hash rate is 290 Kh/s

Am I missing something?

nope,

[lagur]

Cool thanks!

Do you guys know the UTC/day formula ?

[noobyonekenobi]

Cool thanks!

Do you guys know the UTC/day formula ?

http://www.coinwarz.com/calculators/ultracoin-mining-calculator

[ozkraut]

Running few 280x and getting a lot of HW errors.

So I need to use -I 12 to HW:0

Now my 280x hash rate is 290 Kh/s

Am I missing something?

nope,

well i found I can up the clock to 1100 and get to 304 ish without much extra heat and no drama. Played with Mem / higher but it went down ever so slighlty. YMMV

[MasterCATZ]

Just find in twitter that now we can buy sex toy with UTC 

http://www.cryptosextoys.com/

Great job by bumface?

I bought sexcoin last year  for that place as valentine gift ... then it lost value


wow I must have bought SXC when it was around UTC's current value

5000 gets vibrator 100 UTC gets vibrator , and the 500 SXC I bought last time would have bought 5 Vibrators

Running few 280x and getting a lot of HW errors.

So I need to use -I 12 to HW:0

Now my 280x hash rate is 290 Kh/s

Am I missing something?

the only other thing could be to change your GAP size
tho I  doubt it will do much

you could also try lowering your work size
go back to your normal intensity and drop work size  to 64k and see if it still HW errors and if hash rate improves any

the Nfactor uses more memory so you need to stop things clashing with full memory

I never had HW errors with my R9 290's but they all run low work sizes , I just thought i fried them until I saw nitro's memo about Nfactor kicking in
on bright size a lot of rigs gone offline

[bcpete]

@lagur
so you finally ditched mining on a memecoin.....if you listened to me(destiny123) on TPC you could've mined more.

[Th3Trax]

i need help for a config !

System
Windows 7 32bit
Asrock h81 BTC
intel G3220
4gb ram
With
2 x Sapphire 7950 "11196-19-20G" now one by scrypt-jane  200k
1 x Sapphire 208X "11221-00-20G" Now by scrypt-jane 260 k

I have this config in the moment :

ultracoinminer -o stratum+tcp:// -u x -p x --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -I 13 -g 2 -w 256 --temp-cutoff 83 --temp-overheat 80 --queue 0 --no-submit-stale --scan-time 1 --no-submit-stale

280x  by normal scrypt i have 730
gpu 930
memory 1250
volt 1131

7950 by normal scrypt i have one 550
gpu 975
memory 1300
Volt 1168

[lagur]

Running few 280x and getting a lot of HW errors.

So I need to use -I 12 to HW:0

Now my 280x hash rate is 290 Kh/s

Am I missing something?

the only other thing could be to change your GAP size
tho I  doubt it will do much

you could also try lowering your work size
go back to your normal intensity and drop work size  to 64k and see if it still HW errors and if hash rate improves any

the Nfactor uses more memory so you need to stop things clashing with full memory

I never had HW errors with my R9 290's but they all run low work sizes , I just thought i fried them until I saw nitro's memo about Nfactor kicking in
on bright size a lot of rigs gone offline

Thanks noted, will do that!

@lagur
so you finally ditched mining on a memecoin.....if you listened to me(destiny123) on TPC you could've mined more.

Actually I already ditched that coin for VTC before the incident happened.

[bcpete]

 

[stewart2012]

before some days i mined nearly 100 coin with difficaulty more 20 for 1 days with 4 R290

but now with difficaulty under 10 i mine same amount for 1 days

why ? i expect that mine twice amount in this mood ...

in current time mine for this coin is not profitable ... why my hash rate Halved from yesterday ?

i cant understand ...  

MAX hash rate was 620 yesterday for every R290 card but now its 310 for every card ... whats reason ?

[zoata87]

i have to laugh so hard about the people who cry 24/7...

why is my hashrate so low...
its not profitable anymore...
why has my hashrate halfed...

ARE YOU SEVERELY DISABLED AND NOT ABLE TO INFORM YOURSELF AND READ SIMPLE TXTS AND POSTS HERE?


//e

@stewart2012

a few previous pages is the info that hashrate halfed but SHARERATE IS THE SAME. god jesus is it THAT DIFFICULT to get back a few pages and READ ON YOUR OWN?

[stewart2012]

i have to laugh so hard about the people who cry 24/7...

why is my hashrate so low...
its not profitable anymore...
why has my hashrate halfed...

ARE YOU SEVERELY DISABLED AND NOT ABLE TO INFORM YOURSELF AND READ SIMPLE TXTS AND POSTS HERE?


//e

@stewart2012

a few previous pages is the info that hashrate halfed but SHARERATE IS THE SAME. god jesus is it THAT DIFFICULT to get back a few pages and READ ON YOUR OWN?

i saw it ... i must get same AMOUNT COIN before hash rate halved ... but now diff is gowing down too and expect more coins that mine with same hash rate because i mined 100 coin with diffe more 20 for one day and now again same amount but with diff less 10 ... i hope you understand me

[bumface]

....after all I have still a view normal questions to Bumface.

I am very curious if he delete this post also or that he can give some professional answers ?

==================================================================================

…And last but not least, if possible, could you answer this question many people have questioned before ;

>>> ....about paying to be listed on exchanges ?  <<<

> What is the DEV team opinion about this ?
> Is it possible and would it help to get sooner on the big exchanges ?
> Would the DEV team want to cooperate together with holders and miners who want to help and make it happen ?
> Is it a idea the DEV team opens a wallet in which the DEV team, holders and miners can do a free donation if they want help paying to get listed on exchanges ?

Wish to get any reaction from you Bumface.....

a few pages back i have asked to stop pasting the same crap over and over, and 1 page before your big red comment you could have read that i said, i will concider it

https://bitcointalk.org/index.php?topic=413978.4460

but you dont read, you just go on and on and on like a train. so why do i delete? because your flooding the thread, people start quoting it and before you know it, its on 4 pages......