FP91G
Legendary
Offline
Activity: 1848
Merit: 1136
|
|
December 01, 2022, 08:44:52 AM |
|
What is wrong here?
--algo FLUX --pool solo-flux.2miners.com:9393 --user t1dh5mybNKAZEAz85PBRpHtMmYXfLX7XX86.$rigName -apihost 127.0.0.1 --apiport 4444 --watchdogscript reboot.sh
Miner ended or crashed. Restarting miner in 30 seconds...
Running miner: lolminer-v1.60
Options: --algo FLUX --pool solo-flux.2miners.com:9393 --user t1dh5mybNKAZEAz85PBRpHtMmYXfLX7XX86.OC3001 -apihost 127.0.0.1 --apiport 4444 --watchdogscript reboot.sh
option '--algo' cannot be specified more than once
Miner ended or crashed. Restarting miner in 30 seconds...
I generated this command when using the generator for solo mining on the site https://soloflux.fluxpools.net/extras : lolMiner.exe --user t1dh5mybNKAZEAz85PBRpHtMmYXfLX7XX86.OC3001 --port 7201 --pool us-solo-flux.fluxpools.net --pass x --coin FLUX FLUX is not an algorithm but a coin, its ZelHash algorithm. Every site has generators to run miners, have you used that?
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
December 01, 2022, 09:00:59 PM |
|
What is wrong here?
--algo FLUX --pool solo-flux.2miners.com:9393 --user t1dh5mybNKAZEAz85PBRpHtMmYXfLX7XX86.$rigName -apihost 127.0.0.1 --apiport 4444 --watchdogscript reboot.sh
Miner ended or crashed. Restarting miner in 30 seconds...
Running miner: lolminer-v1.60
Options: --algo FLUX --pool solo-flux.2miners.com:9393 --user t1dh5mybNKAZEAz85PBRpHtMmYXfLX7XX86.OC3001 -apihost 127.0.0.1 --apiport 4444 --watchdogscript reboot.sh
option '--algo' cannot be specified more than once
Miner ended or crashed. Restarting miner in 30 seconds...
It seems you are in HiveOS. Try to update it or select ZEL
|
|
|
|
FP91G
Legendary
Offline
Activity: 1848
Merit: 1136
|
|
December 07, 2022, 11:12:28 AM |
|
lolMiner 1.64
Changes Improved Kaspa only mining performance. Speed increase is about 8-8.5% on Nvidia Pascal GPUs, 4.5-5% on Nvidia Turing and Ampere GPUs and 3-4% on AMD Navi and Big Navi GPUs Beta feature: added options to set core clock offset (--coff), memory clock offset (--moff), power limit (--pl) and a fixed fan speed (--fan) on common Nvidia GPUs. Required are admin privileges and Nvidia drivers 520 or higher! The syntax is the same as with --cclk and --mclk - if a single value is given then it will be applied to all compatible GPUs, else a coma separated list of values can be given using a * character to skip over GPUs. (1) Added a new parameter --no-oc-reset to turn off the reset of overclock settings when ending the miner. Windows: Added a beta gui to generate overclock settings strings / .bat files for the miner. Also the tool can apply the chosen settings directly. https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.64Check all links with this post from the developer. https://bitcointalk.org/index.php?topic=4724735.0
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
romeoxxx
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 10, 2022, 07:32:13 AM |
|
Hi Is there a possibility to dual mine KASPA as a first coin and ZIL as a second coin? I tried to do it but it seems like you can mine ZIL with ETH/ETC like coins only.
|
|
|
|
Xeon_Xeon
|
|
December 11, 2022, 01:13:28 PM |
|
Just installed 1.64 lolminer in Windows 11 with one EVGA RTX 3090Ti Ftw3 last night.
Used the mine_kas_with_oc.bat with the following changes:
set "LOCKCORE=1470" set "LOCKMEM=810" set "COREOFFSET=325"
Result: 887.3 mh/s at 110 watts as per lolminer and temp is 54c per afterburner.
Using lolminer mine_kas.bat with stock settings with zero mods was ~1200 mh/s at 440 watts with a temp of 69c.
Edit to add 100% stable with zero issues.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3234
Merit: 1003
|
|
December 11, 2022, 05:17:31 PM Last edit: December 12, 2022, 07:47:45 PM by tbearhere |
|
Anyone know want to fix in this bat file plz? I need to set clocks for each card differently windows 10. thx set "EXTRAPARAMETERS=--devices 0,1,2,3 --cclk 1600 --mclk 810 --shortstats 30 --log on" This one works ok but I can't set individual clocks. set "EXTRAPARAMETERS=--devices 0,1,2,3 --cclk *,1600,1600,1600,1600 --mclk *,810,810,810,810 --shortstats 30 --log on" This on mines but doesn't work probably. What am I doing wrong in the second bat file plz? EDIT: Got it. I needed this. set "EXTRAPARAMETERS=--devices 0,1,2,3 --cclk 1600,1600,1600,1600 --mclk 810,810,810,810 --shortstats 30 --log on"
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3234
Merit: 1003
|
|
December 13, 2022, 11:18:23 PM |
|
What command can I use to reset the >memory< clocks to normal plz? thx ? I know there is one for core clocks.
|
|
|
|
FP91G
Legendary
Offline
Activity: 1848
Merit: 1136
|
|
December 14, 2022, 10:27:57 AM |
|
What command can I use to reset the >memory< clocks to normal plz? thx ? I know there is one for core clocks. I try not to adjust these values in the miner, because they do not always work correctly. In Windows, you can use third-party programs to fine-tune the memory (AMD-OverdriveNTool), and if you need to set default settings, then MSIAfterburner will do. In Hive OS and analogues, this is configured in the application interface
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
tbearhere
Legendary
Offline
Activity: 3234
Merit: 1003
|
|
December 14, 2022, 02:28:32 PM |
|
What command can I use to reset the >memory< clocks to normal plz? thx ? I know there is one for core clocks. I try not to adjust these values in the miner, because they do not always work correctly. In Windows, you can use third-party programs to fine-tune the memory (AMD-OverdriveNTool), and if you need to set default settings, then MSIAfterburner will do. In Hive OS and analogues, this is configured in the application interface I should have said after I stop the mining app. because the clocks stay as set by the mining app. and afterburner won't charge them ether. But found out I can use the GUI in the unzipped app. to reset the clocks.
|
|
|
|
Dowper_
|
|
December 14, 2022, 04:01:01 PM |
|
What command can I use to reset the >memory< clocks to normal plz? thx ? I know there is one for core clocks. I try not to adjust these values in the miner, because they do not always work correctly. In Windows, you can use third-party programs to fine-tune the memory (AMD-OverdriveNTool), and if you need to set default settings, then MSIAfterburner will do. In Hive OS and analogues, this is configured in the application interface I should have said after I stop the mining app. because the clocks stay as set by the mining app. and afterburner won't charge them ether. But found out I can use the GUI in the unzipped app. to reset the clocks. Which unzipped app?
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
December 14, 2022, 10:43:59 PM |
|
What command can I use to reset the >memory< clocks to normal plz? thx ? I know there is one for core clocks. I try not to adjust these values in the miner, because they do not always work correctly. In Windows, you can use third-party programs to fine-tune the memory (AMD-OverdriveNTool), and if you need to set default settings, then MSIAfterburner will do. In Hive OS and analogues, this is configured in the application interface I should have said after I stop the mining app. because the clocks stay as set by the mining app. and afterburner won't charge them ether. But found out I can use the GUI in the unzipped app. to reset the clocks. Which unzipped app? You can also use the Windows GUI Added and in the Wiki it is a new version 1.0.2a with some improvements too
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3234
Merit: 1003
|
|
December 15, 2022, 03:07:24 PM |
|
What command can I use to reset the >memory< clocks to normal plz? thx ? I know there is one for core clocks. I try not to adjust these values in the miner, because they do not always work correctly. In Windows, you can use third-party programs to fine-tune the memory (AMD-OverdriveNTool), and if you need to set default settings, then MSIAfterburner will do. In Hive OS and analogues, this is configured in the application interface I should have said after I stop the mining app. because the clocks stay as set by the mining app. and afterburner won't charge them ether. But found out I can use the GUI in the unzipped app. to reset the clocks. Which unzipped app? You can also use the Windows GUI Added and in the Wiki it is a new version 1.0.2a with some improvements too Thx yes that's what I was referring to....The Windows GUI.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3234
Merit: 1003
|
|
December 15, 2022, 03:11:26 PM |
|
What command can I use to reset the >memory< clocks to normal plz? thx ? I know there is one for core clocks. I try not to adjust these values in the miner, because they do not always work correctly. In Windows, you can use third-party programs to fine-tune the memory (AMD-OverdriveNTool), and if you need to set default settings, then MSIAfterburner will do. In Hive OS and analogues, this is configured in the application interface I should have said after I stop the mining app. because the clocks stay as set by the mining app. and afterburner won't charge them ether. But found out I can use the GUI in the unzipped app. to reset the clocks. Which unzipped app? lolMiner 1.64 zip file. In it is a Windows GUI file called lolMinerGUI to make it easier to write a batch file with clock settings. https://github.com/Lolliedieb/lolMiner-releases/releases
|
|
|
|
FP91G
Legendary
Offline
Activity: 1848
Merit: 1136
|
|
December 22, 2022, 09:49:15 AM |
|
lolMiner 1.65 Improved Kaspa performance in ETC and ETHW dual mining by about 6-7% on AMD (Big) Navi GPUs and 10-12% on Nvidia Turing and Ampere, measured at the same Ethash speed. The actual improvement depends on the concretely selected dual factor. Re-tuning your setup is highly recommended. Improved Kaspa performance in Kaspa only mining mode by 0.6 to 1.2% on Nvidia GPUs and 0.4-0.5% on AMD (Big) Navi GPUs at approximately same power draw. Beta feature: Added experimental support for AMD RX7900 series. Supported algorithms: Et(c)hash, kHeavyHash and the corresponding dual mining.https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.65Check all links with this post from the developer. https://bitcointalk.org/index.php?topic=4724735.0
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
Metroid
Sr. Member
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
|
December 28, 2022, 01:16:26 AM |
|
It seems beam is not working on lolminer on new nvidia drivers, that must be due to cuda 12 being implemented on newest nvidia drivers? I wonder.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
FP91G
Legendary
Offline
Activity: 1848
Merit: 1136
|
|
January 06, 2023, 12:02:08 PM |
|
From the correspondence of KOLYA MINER ( https://t.me/koliamainer) with the developer of the LOL miner Aleo miner will appear closer to the mainnet https://t.me/koliamainer/8543
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
prostor
Newbie
Offline
Activity: 39
Merit: 0
|
|
January 06, 2023, 07:59:15 PM |
|
from readme: --dualfactor arg (=auto) The ratio in mining speed between the primary and the secondary algorithm in dual mining. Alternative to --maxdualimpact.
which is default argument for "--dualfactor arg (=auto)" ?
|
|
|
|
FP91G
Legendary
Offline
Activity: 1848
Merit: 1136
|
|
January 11, 2023, 09:53:16 AM |
|
lolMiner 1.65aFixed a bug causing sometimes high number of duplicate shares on Kaspa when dual mining with ETC. Changed kaspa stratum behavior: Kaspa mining will now start only after the pool did send an authorization message. This prevents rejected shares at startup. Slightly changed dual mining tuning behavior to a mode a bit slower, but less likely to hang up the GPUs at startup. https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.65aCheck all links with this post from the developer. https://bitcointalk.org/index.php?topic=4724735.0
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
FP91G
Legendary
Offline
Activity: 1848
Merit: 1136
|
|
January 27, 2023, 10:18:17 AM |
|
lolMiner 1.66Added support for mining Nexa on Nvidia Pascal or newer generation GPUs (1). Use --algo NEXA to mine it. Fee is 2%. Note: The pool protocol supported matches the one introduced by rplant pool. That said pools tested by this version are in alphabetical order: acc-pool.pw, rplant.xyz, vipor.net and woolypooly.com. That said this list is not exclusive and every other pool following this protocol should work. Note 2: This code is joint work with Iedoc from BzMiner and it is a refined version with approximately 20% higher speed then the code released in BzMiner v13.0.1. An updated version of BzMiner featuring the improvements of this kernel as well as the same fee level will be released soon. (1) Primary focus in optimization were the low to medium range Nvidia Ampere GPUs. The performance of other generations may vary, but certainly improve the next versions. https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.66Check all links with this post from the developer. https://bitcointalk.org/index.php?topic=4724735.0
|
█████████████████████████ ████████▀▀████▀▀█▀▀██████ █████▀████▄▄▄▄██████▀████ ███▀███▄████████▄████▀███ ██▀███████████████████▀██ █████████████████████████ █████████████████████████ █████████████████████████ ██▄███████████████▀▀▄▄███ ███▄███▀████████▀███▄████ █████▄████▀▀▀▀████▄██████ ████████▄▄████▄▄█████████ █████████████████████████ | BitList | | █▀▀▀▀ █ █ █ █ █ █ █ █ █ █ █ █▄▄▄▄ | ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ . REAL-TIME DATA TRACKING CURATED BY THE COMMUNITY . ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ | ▀▀▀▀█ █ █ █ █ █ █ █ █ █ █ █ ▄▄▄▄█ | | List #kycfree Websites |
|
|
|
Dowper_
|
|
January 27, 2023, 04:28:37 PM Last edit: January 28, 2023, 04:04:41 PM by Dowper_ |
|
RTX 4090 - Nexa Hashrate & Profit - https://www.youtube.com/watch?v=913ycvlPFw4My test on RTX 4090 with lolMiner, a lot better than other miners. When testing with RX 5700 XT it says: Setup Miner... OpenCL driver detected. Number of OpenCL supported GPUs: 1 Cuda driver detected. Number of Cuda supported GPUs: 0 Device 0: Name: AMD Radeon RX 5700 XT Address: 40:0 Vendor: Advanced Micro Devices (AMD) Drivers: OpenCL Memory: 8176 MByte (8173 MByte free) Active: false (Unsupported device or driver version.) All devices deselected or failed compatiblity check. Closing lolMinerPress any key to continue . . . I tried with 22.10.1 and now with 22.12.2 and still not starting...
|
|
|
|
|