lolMiner 1.64: Fastest Kaspa miner in market

[FP91G]

"lolMiner has only 0.7% fee on Ethash, 1.5% on Autolykos V2 and only 1%+0% fee on dual mining. You will find no lower ones in the market with this feature set.

Changes
100% LHR unlock on LHR V1 and V2 GPUs. Unlock working on all supported algorithms including Ethash and dual Mining. Requires Nvidia driver versions 510.x (Linux) or 512.x (Windows) and sudo / administrator privileges!
Added experimental LHR v3 unlock to ~90% (3050) and ~92% (3080 12G) (default enables) Use --lhrv3boost 0 to disable the mode and fall back to ~65% unlock (see notes below).
If the pool connection gets lost on the dual mining algorithm, the miner will now stop the dual mining to save the energy and continues in Ethash only mode until the connection is re-established.
Updated web gui"
https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.50

[jgonzi]

Important update for ETH+TON in Windows for 6Gb GPUs with 1.51a

Is mandatory update to been able to run the dual

[jgonzi]

Watchdog bat file for Windows:

https://github.com/Lolliedieb/lolMiner-releases/wiki/Guide-Windows-(LHR,Watchdog,WebServer,OC)

[FP91G]

Always check links in 1 post
lolMiner 1.51a
Changes & Fixes
Improved / Fixed Nvidia memory management (allowing dual mining in Windows to run for more epochs on 6G cards)
Updated Web Gui - showing LHR unlock percentage and dual factor
"LHR_Unlock_Pct" and "Dual_Factor" now provided per GPU in the API

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.51a

[Gpumanijak]

Why 1060 3gb dont work with lol miner in hiveos, mining ergo? Ergo dag is below 3gb and it says memory error??

[sxemini]

Why 1060 3gb dont work with lol miner in hiveos, mining ergo? Ergo dag is below 3gb and it says memory error??

the miner has a problem after the new epoch. lollidieb is working on it.

[deedeeranged]

Why 1060 3gb dont work with lol miner in hiveos, mining ergo? Ergo dag is below 3gb and it says memory error??

Actually it will be more than 3GB after 18th june 2022

https://minerstat.com/dag-size-calculator

So that is probably why your 3GB card is getting problematic. Ppl always think they have the full 3GB available but forget the card itself/drivers also take some of it.

[FloppyPurpleGherkin]

Why 1060 3gb dont work with lol miner in hiveos, mining ergo? Ergo dag is below 3gb and it says memory error??

Actually it will be more than 3GB after 18th june 2022

https://minerstat.com/dag-size-calculator

So that is probably why your 3GB card is getting problematic. Ppl always think they have the full 3GB available but forget the card itself/drivers also take some of it.

You're referring to ETC, which dag size exceeds 3GB very soon, Ergo won't exceed 3GB dag until May '23 so should work fine on a 3gb card right now.

[FP91G]

Why 1060 3gb dont work with lol miner in hiveos, mining ergo? Ergo dag is below 3gb and it says memory error??

Read about zombie mode. It may be possible to extend mining on 3 GB video cards for several months, but with each new era, the hashrate will decrease, as it was with Ethereum mining. But I also mined ethereum on 4 GB video cards for several months.

[Gpumanijak]

Why 1060 3gb dont work with lol miner in hiveos, mining ergo? Ergo dag is below 3gb and it says memory error??

Read about zombie mode. It may be possible to extend mining on 3 GB video cards for several months, but with each new era, the hashrate will decrease, as it was with Ethereum mining. But I also mined ethereum on 4 GB video cards for several months.

I asked about ergo, not ethereum classic...

[safar1980]

new version lolMiner 1.52

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.52
Changes

Edit: Re-Upload with a small fix regarding TLS. The original version tried to connect with 1.3 and SNI off, the default is now 1.2 with SNI off as in previous versions.

    New memory management for Ergo on Nvidia GPUs. Fixes the miner not working on current epoch on latest release and fixes the requirement to restart the miner on Ergo epoch change
    Added 2 more epochs on Ergo for 3G AMD GPUs. Note that a better management with automatic switch to zombie mode is planned in next version.
    Updated WebUI with a lot of fancy redesign
    Slight changes to LHR unlocker to improve the unlocker stability.
    Removed: 2G zombie modes for Ergo on AMD cards
    Removed: Support for mining Ton in single and dual mining modes. Note that existing dual mining configurations will automatically launch Eth / Etc / Ubiq only mode, so existing configurations will not be broken.

[pit63]

I want to exclude one card on Hiveos, latest Lolminer: GPU 1 / 02:00.0

How can i do it?

[safar1980]

I want to exclude one card on Hiveos, latest Lolminer: GPU 1 / 02:00.0

How can i do it?

Find your flight sheet
Use Lol miner configuration
click  "i"
and follow the prompts to set up the miner. You do not need to read the instructions for the miner.
Save the flight sheet and start mining again.

[jgonzi]

new version lolMiner 1.52

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.52
Changes

Edit: Re-Upload with a small fix regarding TLS. The original version tried to connect with 1.3 and SNI off, the default is now 1.2 with SNI off as in previous versions.

    New memory management for Ergo on Nvidia GPUs. Fixes the miner not working on current epoch on latest release and fixes the requirement to restart the miner on Ergo epoch change
    Added 2 more epochs on Ergo for 3G AMD GPUs. Note that a better management with automatic switch to zombie mode is planned in next version.
    Updated WebUI with a lot of fancy redesign
    Slight changes to LHR unlocker to improve the unlocker stability.
    Removed: 2G zombie modes for Ergo on AMD cards
    Removed: Support for mining Ton in single and dual mining modes. Note that existing dual mining configurations will automatically launch Eth / Etc / Ubiq only mode, so existing configurations will not be broken.

Seems 1.52a is mandatory update to solve a problem on some reconnections

[safar1980]

new version lolMiner 1.52a

Fixes
Fixed a bug that can sometimes cause the pool hash-rate to half after multiple reconnect attempts in a row.
Adjusted behavior of LHR unlock function so solve issues with some configurations occurred in 1.52.

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.52a

[jgonzi]

New 1.53_beta with Dual ETH/ETC + Kaspa

[Morph42]

Been mining a while.  Took a look at my miners and found one had a few cards that "died".  Typically a shutdown and restart fixes that.

After rebooting I found that I can't mine.  I keep getting a "DNS Resolve Error - retrying in 5 seconds".  This happened with another miner.  And the ones that are still going, I'm afraid to touch them now.  I can't figure out why it can't resolve the DNS.

Anyone else see this before?
(using ethermine)

[safar1980]

lolMiner 1.53 beta

Changes

Added Eth/Etc/Ubiq + Kaspa dual mining for AMD RX400, RX500, RX5000 and RX 6000 series. Use --dualmode KASPADUAL to request this algorithm. Requires --dualpool to be set to a Kaspa stratum pool. GPUs that do not support this dual mode will automatically mine Eth/Etc/Ubiq only. This algorithms prefers the newer architectures. Fee is 1%+0% as for all dual mining modes.


https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.53_beta

[jgonzi]

Been mining a while.  Took a look at my miners and found one had a few cards that "died".  Typically a shutdown and restart fixes that.

After rebooting I found that I can't mine.  I keep getting a "DNS Resolve Error - retrying in 5 seconds".  This happened with another miner.  And the ones that are still going, I'm afraid to touch them now.  I can't figure out why it can't resolve the DNS.

Anyone else see this before?
(using ethermine)

That seems to be a ISP fail... try using the ethermine ssl port. To see if helps

[FP91G]

Update beta 2 to beta 3
https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.53_beta_3

Changes (beta 2 to beta 3)
Added Eth/Etc/Ubiq + Kaspa solver for Nvidia Turing (RTX 2000, CMH) and Nvidia Ampere (RTX 3000, RTX Ax000) based GPUs.
Note: on Turing the optimization curve for automatic tuning is very flat - therefore on same cards quite different --dualfactor values can be selected. We recommend to run it once and then select your preferred value manually.
Changes (beta 1 to beta 2)
Significantly improved Kaspa performance in the Eth+Kas solver on RX 400/500. Also improved the possible Eth / Kas ratio on RX 5000 and RX 6000 GPUs or - when running at same ratios - reduced the power consumption.
Improved Alephium performance in the Eth + Aleph solver on RX 5000 and RX 6000 GPUs
Slightly reduced clock demand on Ethash only for RX 5000 GPUs
Added experimental ETC+Kaspa solver for R9 285 / R9 380 (Tonga), RX Fury (Fiji) and RX 460 / 550 (Baffin) GPUs
Fixes