lolMiner 1.64: Fastest Kaspa miner in market

[jgonzi]

Son benchmarks on a 580 4G on epoch 500, that is more than 1 is still 7 mh/s ...
That means the Zombie Mode will be for a long while... At the moment is the most profitable solution connected  in MOBO for a 4Gb Cards with 24-25Mhs

[forato]

Son benchmarks on a 580 4G on epoch 500, that is more than 1 is still 7 mh/s ...
That means the Zombie Mode will be for a long while... At the moment is the most profitable solution connected  in MOBO for a 4Gb Cards with 24-25Mhs

the only problem with zombie mode is that you need a gen 3 PCIE and cannot use risers...

It will be nice if it works on gen 2 pci-e

[forato]

please, anyone know what is the best MB to mine on ZOMBIE mode?

Any mobo that have 4 PCIE gen 3 16x?

[Bakhtra]

please, anyone know what is the best MB to mine on ZOMBIE mode?

Any mobo that have 4 PCIE gen 3 16x?

Even if you can get mobo with 4 PCIE gen 3 16x, you still need CPU that have 64 lane for getting 4x16, and that way more expensive vs gain that you can get from mining eth.

[dext-r]

The MB must be some SLI/CrossFire board

one 4gb card make on Pcie 3.0 x16 (works as x16) gen3 slot now ~26Mh/s
Same board 2pc 4gb card on 2x pcie 3.0 x16 (works as 2x x8) gen3 slot makes 20-21Mh/s per card

For me was asus z170/z270 boards the best solutions

[d57heinz]

please, anyone know what is the best MB to mine on ZOMBIE mode?

Any mobo that have 4 PCIE gen 3 16x?

Even if you can get mobo with 4 PCIE gen 3 16x, you still need CPU that have 64 lane for getting 4x16, and that way more expensive vs gain that you can get from mining eth.

youve seen the price of the new cards right?

when one has to mortgage the house to build a gaming rig one could say the market is working as designed.  but what is the true cost.  generations of kids not able to game or have that experience because their parents already have a mortgage on the house and couldnt ever justify that cost.   really is a sad situation.  bitcoin doesnt fix this.  nor any coin.  this is human greed.  which trumps reasonable thought.

Best regards
Doug

[SCF0]

the only problem with zombie mode is that you need a gen 3 PCIE and cannot use risers...

It will be nice if it works on gen 2 pci-e

It does work on PCI-E Gen 2. But you can't rely on risers and low lanes slots, true. A x16 PCI-E Gen 2 slot would perform equally well as a x8 PCI-E Gen 3 slot.

Son benchmarks on a 580 4G on epoch 500, that is more than 1 is still 7 mh/s ...
That means the Zombie Mode will be for a long while... At the moment is the most profitable solution connected  in MOBO for a 4Gb Cards with 24-25Mhs

I wondered about the viability of Zombie mode as well. I ran a few tests on a Radeon 7970 (3GB) at epoch 254 it would do 25mh/s. Unfortunately zombie mode seems not be to implemented for 3GB cards, at least in my case once i raise the epoch further the hashrate would be 0mh/s. I'd reckon by your results it would still offer something in the range of 5-10mh/s. Of course it may be smarter to mine altcoins with a lower epoch.

[jgonzi]

lolMiner
-- Announcement Thread --

Download:

lolMiner 1.25:
[Linux & Windows] Click me (1.25 - April 7th)


Driver Requirement:
Nvidia:
Cuda 8 - 11
AMD:
- Big Navi: amdgpu-pro 20.40 (Linux) / Adrenaline 20.11.2 (Windows) and newer.
- Navi: amdgpu-pro 19.30 (Linux) /  Adrenaline 19.10.02 (Windows) and newer.
- Vega: amdgpu-pro 18.50 (Linux) /  Adrenaline 18.10 (Windows) and newer.
- older cards: Blockchain drivers and newer.


Usage:
There is a new online manual with basic examples hosted here.


Changelog
Version 1.25

lolMiner goes CUDA!
Added a real Cuda back-end for better Nvidia GPU support on Ethash. Features:

• Supports Maxwell to Ampere GPU generations.
• Two different mining kernels. Use --mode a (faster) --mode b (better energy efficiency) to select between the two. The selection can be done per card via a comma separated list. In mixed system select 'a' for skipping over the AMD cards.
• Both kernel modes need less energy and perform better then in 1.24a
• Reduced internal latency for less stale shares
• Reduced CPU load when mining with Nvidia cards
• lolMiner works now without OpenCL driver installed
• In case of mixed rigs AMD GPUs will use OpenCL while Nvidia cards use Cuda
• ZIL cache feature fully supported (and stable)
• Temperature stop & Zombie mode is currently not supported

Further Feature Updates:

• Added Ethash, Beam Hash III, Grin Cuckatoo 32 and Cortex kernels for RX 6700
• The Ethash stratum interface will now try to run up to three attempts of reconnecting before switching the stratum mode

Bug fixes

• Fixed "Warning: index out of bounds" error when switching from ETHPROXY to ETHV1 stratum mode. This might solve problems with some pools on connection loss.

Nice update :-)  

It is really interesting the Fix Clock for Nvidia, for Linux and Windows... the reduction of Watts are impressive.
Here one Nvidia Rig with memories at 1500. Clock Fixed to 750 in 3070 and 1020 in 3080... With higher memories the clock should be pushed a little bit not too much



Here a nice mix Rig, with an incredible performance with the RTX 2070 Super... going under 90W... Really nice

[/list]

[batsonxl]

Thanks for new version, Can you add that future to AMD cards too made a and b. Will be nice to see beam mining improvements too and raven support please.

[chup]

no OpenCL no fun:



EDIT: system with one Nvidia 1080ti

[FP91G]

no OpenCL no fun:

EDIT: system with one Nvidia 1080ti

Check the hash of the downloaded miner to make sure you downloaded a non-viral version.
Remove your drivers using utilities and download new drivers, but without Resizable BAR support. Use versions up to March 2021.
After reinstalling the drivers, the problem usually disappears. What operating system do you have?

[demian198]

So there will be no chance for rx5500xt to mine ae, cortex and grin32 without device crash...  

[jgonzi]

So there will be no chance for rx5500xt to mine ae, cortex and grin32 without device crash...  

if you have a 4Gb you will not be able... if you have a 8Gb you should be able to mine it...

[demian198]

So there will be no chance for rx5500xt to mine ae, cortex and grin32 without device crash...  

if you have a 4Gb you will not be able... if you have a 8Gb you should be able to mine it...

If there is a way please help me ! I have Asrock Rx5500Xt Challenger 8GB OC Edition (not overclocked as it's an already oc edition by manufacturer). I also use Adrenalin 21.3.1

[DragonFlight]

Testing latest lolminer 1.25 on my 3 nvidia rigs. All looking good for now. Simple question. In hashrates info, Shares (A/S/Hw)..... A is for Accepted shares. S is for Stale shares??? What is Hw?

[jgonzi]

Testing latest lolminer 1.25 on my 3 nvidia rigs. All looking good for now. Simple question. In hashrates info, Shares (A/S/Hw)..... A is for Accepted shares. S is for Stale shares??? What is Hw?

Hw is hardware error bad DAG Generated... have you follow the : https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-(English) To fix the clock to reduce the Watts?

[DragonFlight]

Testing latest lolminer 1.25 on my 3 nvidia rigs. All looking good for now. Simple question. In hashrates info, Shares (A/S/Hw)..... A is for Accepted shares. S is for Stale shares??? What is Hw?

Hw is hardware error bad DAG Generated... have you follow the : https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-(English) To fix the clock to reduce the Watts?

Thanks. I have no Hw errors. Just asking what it is. For clock fix that you said, SMOS seems like it is not supported.

[jgonzi]

Testing latest lolminer 1.25 on my 3 nvidia rigs. All looking good for now. Simple question. In hashrates info, Shares (A/S/Hw)..... A is for Accepted shares. S is for Stale shares??? What is Hw?

Hw is hardware error bad DAG Generated... have you follow the : https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-(English) To fix the clock to reduce the Watts?

Thanks. I have no Hw errors. Just asking what it is. For clock fix that you said, SMOS seems like it is not supported.

You can do it manually directly executing in the bash like:

nvidia-smi -i 0 -lgc $VALUE & nvidia-smi -i 1 -lgc $VALUE & nvidia-smi -i 2 -lgc $VALUE & nvidia-smi -i 3 -lgc $VALUE & ... (The last one without &)

[DragonFlight]

Testing latest lolminer 1.25 on my 3 nvidia rigs. All looking good for now. Simple question. In hashrates info, Shares (A/S/Hw)..... A is for Accepted shares. S is for Stale shares??? What is Hw?

Hw is hardware error bad DAG Generated... have you follow the : https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-(English) To fix the clock to reduce the Watts?

Thanks. I have no Hw errors. Just asking what it is. For clock fix that you said, SMOS seems like it is not supported.

You can do it manually directly executing in the bash like:

nvidia-smi -i 0 -lgc $VALUE & nvidia-smi -i 1 -lgc $VALUE & nvidia-smi -i 2 -lgc $VALUE & nvidia-smi -i 3 -lgc $VALUE & ... (The last one without &)

Thanks. Can i pm you?

[DragonFlight]

Testing latest lolminer 1.25 on my 3 nvidia rigs. All looking good for now. Simple question. In hashrates info, Shares (A/S/Hw)..... A is for Accepted shares. S is for Stale shares??? What is Hw?

Hw is hardware error bad DAG Generated... have you follow the : https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-(English) To fix the clock to reduce the Watts?

Thanks. I have no Hw errors. Just asking what it is. For clock fix that you said, SMOS seems like it is not supported.

You can do it manually directly executing in the bash like:

nvidia-smi -i 0 -lgc $VALUE & nvidia-smi -i 1 -lgc $VALUE & nvidia-smi -i 2 -lgc $VALUE & nvidia-smi -i 3 -lgc $VALUE & ... (The last one without &)

I get this error
Running User Bash commands...
The current user does not have permission to change clocks for GPU 00000000:01:00.0.