lolMiner 1.64: Fastest Kaspa miner in market

[jgonzi]

guys third gpu shows 0, any ideas? thanks

That is GPU 0 that is showing 0.00 hash.
Probably need to watch miner output when it starts to see error message why its not hashing.

Is gpu0 a 4gb rx580?  Also is your driver anywhere near current?

Windows uses some of the memory of the first video card for some reason (linux does not suffer this).

Post up what the miner is showing when spinning up and any error message it is showing about gpu0.
Also your command line.

1) no its 8gb
2) driver is crimson beta old version (but it worked 1 week ago with no problems)
3) miner stil works with no error message
4) command line? can you explain what this means and how to post it

p.s i have updated to new driver but still the same.. and then downgraded again

thanks for your reply

Did you try and Linux OS, like MMPOS or HiveOS?

[1714851922]

1714851922

[1714851922]

1714851922

[1714851922]

1714851922

[1714851922]

1714851922

[jgonzi]

guys third gpu shows 0, any ideas? thanks

Did you get working?.

[Morph42]

guys third gpu shows 0, any ideas? thanks

I have two miners running Win10 as well.  This happens for me when the AMD driver crashes on a particular card.  I will get the error from AMD and when I look it may have 1 or 3 cards that are mining at zero.

When this happens I have to fully shut down the miner, bring it back up and then I can use it again.  A reboot will not work in this case.  (it appears to hold on to the problem - as if it requires the video card to lose/drain all power)

I have a separate box running LinuxMint - trying to see if I can't run it the same, but it doesn't have (or I haven't found yet) the same way to boost the cards as I do in Windows.

[DrX]

It happens on all miners with the 5700 and old HiveOS version...
Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt.
If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-)

It was solved on this realease:

0.6-190linux
2021-01-08
LINUX SYSTEM IMAGE
New Stable branch
Hive Linux client: v0.6-190@201106
Universal boot mode: BIOS | UEFI
Linux kernel: v5.4.80-hiveos
Drivers version: AMD v20.40, Nvidia: v455.45.01
Universal image with "support from the box" AMD Polaris/Vega/Navi and Nvidia 10xx/16xx/20xx/30xx

Its not possible, i was using TRM for at least 3-4 months and after that 1 month PM without any memory problems. It started when i changed to lolMiner.
And if i change back to TRM, there is no problem with memory. It shows 6.6gb free ram all the time. (And if you havent noticed its RAM not VRAM)

(5.8gb now :-) )

But i can try to update that driver when i visit the mining site. Last time i tried 20.4, it didnt work, cant remember which card didn't show up.

and thanks for advice.

Driver 20.20 has a memory leak... is not miner depence.  Just update and you will have all solved... but update your complete image to 5.4.0-hiveos #108 the last avaliable in website. You will continue having all the same copying the rig.conf ☺

Updated driver to 20.40 and it broke everything, no OC or fan control on RX5600 and RX5700 -> Big problems with over heating... Now back at 20.20, everything working again, added auto restart every week for miner so no more problem
With 20.20 also hashrate higher and lower power consumption on RX570 and RX580.

I hope you update the image of HiveOS soon as I said you  then all will go perfectly ... meanwhile you will continue having the autoreboot when free memory ends...

Now i updated to new image and everything is working well, thank you. Also noticed on same visit rx570 fan was failing. Bad quality fan from XFX, only 6 months old and already failing.
I also Tested lolMiner, TRM and PM for hashrates. (2xRX580,RX5700,RX5600,RX570.)
lolMiner gives total 183Mh/s
TRM gives total 186Mh/s thanks to RX5700 which gives 56Mh/s vs lolMiner 53Mh/s.
PM gives total 186Mh/s thanks to better hash on Polaris (RX580/RX570), 31Mh/s vs 30Mh/s. I know that PM is said to cheat on Hashrate and also uses little bit more power.

--> No big difference between miners...

[swogerino]

guys third gpu shows 0, any ideas? thanks

I have two miners running Win10 as well.  This happens for me when the AMD driver crashes on a particular card.  I will get the error from AMD and when I look it may have 1 or 3 cards that are mining at zero.

When this happens I have to fully shut down the miner, bring it back up and then I can use it again.  A reboot will not work in this case.  (it appears to hold on to the problem - as if it requires the video card to lose/drain all power)

I have a separate box running LinuxMint - trying to see if I can't run it the same, but it doesn't have (or I haven't found yet) the same way to boost the cards as I do in Windows.

If you start normally with that card it means it is a driver problem and so far the only miner which restarts after 10 second with the same settings you had mining normally before the crash is NBMiner.I had a lot of problems with Phoenix,lolminer and a few others with the RX 6800 XT-s I have and since I switched to NBMiner,when a driver crash happens from AMD I only lose 10 seconds and I am back again running with the same overclocking settings.I don't know how they do that but I think it is an absolute must nowadays that all the other miners implement this.Both Phoenix and lolminer continue to mine with 0 Mhsh when a driver crash happens until these versions and this is a suggestion I make here for them to fix the issue for the AMD cards.

[jgonzi]

It happens on all miners with the 5700 and old HiveOS version...
Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt.
If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-)

It was solved on this realease:

0.6-190linux
2021-01-08
LINUX SYSTEM IMAGE
New Stable branch
Hive Linux client: v0.6-190@201106
Universal boot mode: BIOS | UEFI
Linux kernel: v5.4.80-hiveos
Drivers version: AMD v20.40, Nvidia: v455.45.01
Universal image with "support from the box" AMD Polaris/Vega/Navi and Nvidia 10xx/16xx/20xx/30xx

Its not possible, i was using TRM for at least 3-4 months and after that 1 month PM without any memory problems. It started when i changed to lolMiner.
And if i change back to TRM, there is no problem with memory. It shows 6.6gb free ram all the time. (And if you havent noticed its RAM not VRAM)

(5.8gb now :-) )

But i can try to update that driver when i visit the mining site. Last time i tried 20.4, it didnt work, cant remember which card didn't show up.

and thanks for advice.

Driver 20.20 has a memory leak... is not miner depence.  Just update and you will have all solved... but update your complete image to 5.4.0-hiveos #108 the last avaliable in website. You will continue having all the same copying the rig.conf ☺

Updated driver to 20.40 and it broke everything, no OC or fan control on RX5600 and RX5700 -> Big problems with over heating... Now back at 20.20, everything working again, added auto restart every week for miner so no more problem
With 20.20 also hashrate higher and lower power consumption on RX570 and RX580.

I hope you update the image of HiveOS soon as I said you  then all will go perfectly ... meanwhile you will continue having the autoreboot when free memory ends...

Now i updated to new image and everything is working well, thank you. Also noticed on same visit rx570 fan was failing. Bad quality fan from XFX, only 6 months old and already failing.
I also Tested lolMiner, TRM and PM for hashrates. (2xRX580,RX5700,RX5600,RX570.)
lolMiner gives total 183Mh/s
TRM gives total 186Mh/s thanks to RX5700 which gives 56Mh/s vs lolMiner 53Mh/s.
PM gives total 186Mh/s thanks to better hash on Polaris (RX580/RX570), 31Mh/s vs 30Mh/s. I know that PM is said to cheat on Hashrate and also uses little bit more power.

--> No big difference between miners...

Great news that the update worked 😀...

You should need a bit more core  on Navi to get more hash... also remember 0.7% Fee in lolMiner vs 1% TRM

[Morph42]

guys third gpu shows 0, any ideas? thanks

I have two miners running Win10 as well.  This happens for me when the AMD driver crashes on a particular card.  I will get the error from AMD and when I look it may have 1 or 3 cards that are mining at zero.

When this happens I have to fully shut down the miner, bring it back up and then I can use it again.  A reboot will not work in this case.  (it appears to hold on to the problem - as if it requires the video card to lose/drain all power)

I have a separate box running LinuxMint - trying to see if I can't run it the same, but it doesn't have (or I haven't found yet) the same way to boost the cards as I do in Windows.

If you start normally with that card it means it is a driver problem and so far the only miner which restarts after 10 second with the same settings you had mining normally before the crash is NBMiner.I had a lot of problems with Phoenix,lolminer and a few others with the RX 6800 XT-s I have and since I switched to NBMiner,when a driver crash happens from AMD I only lose 10 seconds and I am back again running with the same overclocking settings.I don't know how they do that but I think it is an absolute must nowadays that all the other miners implement this.Both Phoenix and lolminer continue to mine with 0 Mhsh when a driver crash happens until these versions and this is a suggestion I make here for them to fix the issue for the AMD cards.

For myself at least, it's very random.  Doesn't happen too often, but when it does it's just (1) random card, or a couple.  Either way, it still requires a full shutdown to cure.
I do like your suggestion though as I was unaware that NBMiner did that. I'm a fan of lolminer, it's not the apps fault, but I do wish that this auto-reset functionality was there.

[sxemini]

It happens on all miners with the 5700 and old HiveOS version...
Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt.
If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-)

It was solved on this realease:

0.6-190linux
2021-01-08
LINUX SYSTEM IMAGE
New Stable branch
Hive Linux client: v0.6-190@201106
Universal boot mode: BIOS | UEFI
Linux kernel: v5.4.80-hiveos
Drivers version: AMD v20.40, Nvidia: v455.45.01
Universal image with "support from the box" AMD Polaris/Vega/Navi and Nvidia 10xx/16xx/20xx/30xx

Its not possible, i was using TRM for at least 3-4 months and after that 1 month PM without any memory problems. It started when i changed to lolMiner.
And if i change back to TRM, there is no problem with memory. It shows 6.6gb free ram all the time. (And if you havent noticed its RAM not VRAM)

(5.8gb now :-) )

But i can try to update that driver when i visit the mining site. Last time i tried 20.4, it didnt work, cant remember which card didn't show up.

and thanks for advice.

Driver 20.20 has a memory leak... is not miner depence.  Just update and you will have all solved... but update your complete image to 5.4.0-hiveos #108 the last avaliable in website. You will continue having all the same copying the rig.conf ☺

Updated driver to 20.40 and it broke everything, no OC or fan control on RX5600 and RX5700 -> Big problems with over heating... Now back at 20.20, everything working again, added auto restart every week for miner so no more problem
With 20.20 also hashrate higher and lower power consumption on RX570 and RX580.

I hope you update the image of HiveOS soon as I said you  then all will go perfectly ... meanwhile you will continue having the autoreboot when free memory ends...

Now i updated to new image and everything is working well, thank you. Also noticed on same visit rx570 fan was failing. Bad quality fan from XFX, only 6 months old and already failing.
I also Tested lolMiner, TRM and PM for hashrates. (2xRX580,RX5700,RX5600,RX570.)
lolMiner gives total 183Mh/s
TRM gives total 186Mh/s thanks to RX5700 which gives 56Mh/s vs lolMiner 53Mh/s.
PM gives total 186Mh/s thanks to better hash on Polaris (RX580/RX570), 31Mh/s vs 30Mh/s. I know that PM is said to cheat on Hashrate and also uses little bit more power.

--> No big difference between miners...

Great news that the update worked 😀...

You should need a bit more core  on Navi to get more hash... also remember 0.7% Fee in lolMiner vs 1% TRM

183 *0,993 = 181,719mh with lolminer
186 *0,99 = 184,14mh with trm

trm wins

[jgonzi]

It happens on all miners with the 5700 and old HiveOS version...
Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt.
If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-)

It was solved on this realease:

0.6-190linux
2021-01-08
LINUX SYSTEM IMAGE
New Stable branch
Hive Linux client: v0.6-190@201106
Universal boot mode: BIOS | UEFI
Linux kernel: v5.4.80-hiveos
Drivers version: AMD v20.40, Nvidia: v455.45.01
Universal image with "support from the box" AMD Polaris/Vega/Navi and Nvidia 10xx/16xx/20xx/30xx

Its not possible, i was using TRM for at least 3-4 months and after that 1 month PM without any memory problems. It started when i changed to lolMiner.
And if i change back to TRM, there is no problem with memory. It shows 6.6gb free ram all the time. (And if you havent noticed its RAM not VRAM)

(5.8gb now :-) )

But i can try to update that driver when i visit the mining site. Last time i tried 20.4, it didnt work, cant remember which card didn't show up.

and thanks for advice.

Driver 20.20 has a memory leak... is not miner depence.  Just update and you will have all solved... but update your complete image to 5.4.0-hiveos #108 the last avaliable in website. You will continue having all the same copying the rig.conf ☺

Updated driver to 20.40 and it broke everything, no OC or fan control on RX5600 and RX5700 -> Big problems with over heating... Now back at 20.20, everything working again, added auto restart every week for miner so no more problem
With 20.20 also hashrate higher and lower power consumption on RX570 and RX580.

I hope you update the image of HiveOS soon as I said you   then all will go perfectly ... meanwhile you will continue having the autoreboot when free memory ends...

Now i updated to new image and everything is working well, thank you. Also noticed on same visit rx570 fan was failing. Bad quality fan from XFX, only 6 months old and already failing.
I also Tested lolMiner, TRM and PM for hashrates. (2xRX580,RX5700,RX5600,RX570.)
lolMiner gives total 183Mh/s
TRM gives total 186Mh/s thanks to RX5700 which gives 56Mh/s vs lolMiner 53Mh/s.
PM gives total 186Mh/s thanks to better hash on Polaris (RX580/RX570), 31Mh/s vs 30Mh/s. I know that PM is said to cheat on Hashrate and also uses little bit more power.

--> No big difference between miners...

Great news that the update worked 😀...

You should need a bit more core  on Navi to get more hash... also remember 0.7% Fee in lolMiner vs 1% TRM

183 *0,993 = 181,719mh with lolminer
186 *0,99 = 184,14mh with trm

trm wins

You should check watts and Average at the pool ;-) ... If we trust only the reported always the winner is another but the reality is another ... but as I said just put more core... and there is no difference then...

[DrX]

Yeah that 3Mh/s is about 0.00007 eth and ~0.2$. in a day.

Stability is the key for me, dont care about cents.   

[jgonzi]

Yeah that 3Mh/s is about 0.00007 eth and ~0.2$. in a day.

Stability is the key for me, dont care about cents.   

That's probably one of the best characteristics of the miner. His stability.

[jgonzi]

guys third gpu shows 0, any ideas? thanks

Have you finally try a Linux Mining OS?. There are several free that will sure work better than W10.

[mrbugera2]

guys third gpu shows 0, any ideas? thanks

Have you finally try a Linux Mining OS?. There are several free that will sure work better than W10.

sorry for beeing late..

changed to hive os and now everything is ok thank you mate

[jgonzi]

guys third gpu shows 0, any ideas? thanks

Have you finally try a Linux Mining OS?. There are several free that will sure work better than W10.

sorry for beeing late..

changed to hive os and now everything is ok thank you mate

That's great... I also recommend you to have a look to mmpOS.eu it is really good OS and IMO, it has always the last realease.

[jgonzi]

An interesting comparative of ERGO Miners:
ERGO Miners Comparative https://medium.com/@jgonzi/ergo-miners-comparative-e9e24acb20dc

[sxemini]

An interesting comparative of ERGO Miners:
ERGO Miners Comparative https://medium.com/@jgonzi/ergo-miners-comparative-e9e24acb20dc

Useless comparative. Compare 1 week and not 1 day do delete the luck factor. But i said this many times 

[jgonzi]

I found an online link interesting for the bat creation, it works pretty well

http://lolminer.byethost16.com/

[jgonzi]

First try of new Hyninx BIOS with lolMiner:



I need to see if I can improve it more ...

The income is quite nice more than 10% 

[jgonzi]

I have been trying a new 6600XT... and the Watts consume is amazing:



32Mhs - 47W.

I have checked at the wall and this value is not like the old Polaris, that values are real.

[fmz89]

Dang ergo taking off to fast, almost 3x times in a month, the difficulty to fast to handle in small network, now the profit is sinking almost par with eth, hope some farm switch to eth, and ergo can breathe again for small miner