lolMiner 1.64: Fastest Kaspa miner in market

[jgonzi]

Testing version 1.20 with DUAL Mining EZIL... Using in my case a 2Miners pool ETH + EZIL for ZIL...  
It is important to have a stable rig, because if you have problems of cards going down on new DAG or too much undervolt, it can make stop working some card in the ZIL switch... If that happens look which card goes to 0 to increase the voltage for that card:

Statistics (00:22:18); Mining: Ethash
Connected to: eth.2miners.com:2020
Uptime: 1h 26m 3s
                        GPU 0    GPU 1    GPU 2    GPU 3    GPU 4    GPU 5    GPU 6     Total
Speed (mh/s):           93.74    49.71    49.77    52.99    53.02    49.77    49.83    398.83
Pool (mh/s):           103.10    38.87    57.47    43.94    60.85    32.11    60.85    397.19
Best Share:            496.8G   140.0G    88.5G   556.3G   436.8G   474.3G   353.5G    556.3G
Shares (A/S/Hw):       61/0/0   23/0/0   34/0/0   26/0/0   36/0/0   19/0/0   36/0/0   235/0/0
Power (W):              212.4     89.2     89.0     97.5     78.4     88.5     84.0     739.0
Efficiency (mh/s/W):    0.440    0.554    0.556    0.541    0.672    0.559    0.590     0.540
Temp (deg C):              63       60       60       62       61       64       52          
Junction (deg C):        n.a.       73       66       75       67       68       61          
Memory (deg C):          n.a.       76       80       80       80       82       80          
Fan Speed (%):             72       54       53       60       36       40       60          
---------------------------------------------
Average speed (10s): 93.79mh/s | 49.67mh/s | 49.68mh/s | 53.05mh/s | 52.96mh/s | 49.74mh/s | 49.82mh/s Total: 398.70 mh/s
GPU 5: Found a share of difficulty 16.44G
GPU 5: Share accepted (37 ms)
Eth: New job received: 0xcae4bb Epoch: 390 Target: 000000007e000000
Eth: New job received: 0xc37df3 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x7e74ac Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.82mh/s | 49.69mh/s | 49.66mh/s | 53.06mh/s | 52.93mh/s | 49.74mh/s | 49.81mh/s Total: 398.70 mh/s
Eth: New job received: 0xfe50f6 Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.72mh/s | 49.69mh/s | 49.66mh/s | 53.06mh/s | 52.90mh/s | 49.76mh/s | 49.86mh/s Total: 398.64 mh/s
Eth: New job received: 0x20bd98 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x59b662 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x570e43 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0xf6360f Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.80mh/s | 49.65mh/s | 49.65mh/s | 53.05mh/s | 52.93mh/s | 49.73mh/s | 49.85mh/s Total: 398.65 mh/s
Eth: New job received: 0x7d9c64 Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.78mh/s | 49.66mh/s | 49.65mh/s | 53.05mh/s | 52.96mh/s | 49.76mh/s | 49.70mh/s Total: 398.56 mh/s
Eth: New job received: 0xe62556 Epoch: 390 Target: 000000007e000000
Activating ZIL connection: ZIL shard epoch active.
Zil: New job received: 0xb7a494 Epoch: 0 Target: 000000007fd9e5ba
-------------------------------------------------------
         Generating light cache for epoch 0
-------------------------------------------------------
-------------------------------------------------------
     Done (525 ms), size of new DAG: 1024 MByte
-------------------------------------------------------
Start DAG gen on GPU 0 (normal mode)
Start DAG gen on GPU 1 (normal mode)
Start DAG gen on GPU 2 (normal mode)
Start DAG gen on GPU 5 (normal mode)
Start DAG gen on GPU 3 (normal mode)
Start DAG gen on GPU 6 (normal mode)
Start DAG gen on GPU 4 (normal mode)
Finished DAG gen on GPU 0 (457 ms)
Finished DAG gen on GPU 3 (1281 ms)
Finished DAG gen on GPU 1 (1333 ms)
Finished DAG gen on GPU 2 (1333 ms)
Finished DAG gen on GPU 4 (1343 ms)
Finished DAG gen on GPU 5 (1375 ms)
Finished DAG gen on GPU 6 (1434 ms)
Average speed (10s): 84.60mh/s | 40.48mh/s | 40.48mh/s | 43.87mh/s | 43.50mh/s | 40.48mh/s | 40.37mh/s Total: 333.77 mh/s
---------------------------------------------
Statistics (00:23:18); Mining: Ethash
Connected to: eu.ezil.me:5555
Uptime: 1h 27m 3s
                        GPU 0    GPU 1    GPU 2    GPU 3    GPU 4    GPU 5    GPU 6     Total
Speed (mh/s):           92.33    48.22    48.16    51.58    51.33    48.19    48.29    388.11
Pool (mh/s):           101.92    38.43    56.81    43.44    60.15    33.41    60.15    394.29
Best Share:            496.8G   140.0G    88.5G   556.3G   436.8G   474.3G   353.5G    556.3G
Shares (A/S/Hw):       61/0/0   23/0/0   34/0/0   26/0/0   36/0/0   20/0/0   36/0/0   236/0/0
Power (W):              212.4     89.5     89.4     97.5     78.3     88.3     84.5     739.9
Efficiency (mh/s/W):    0.434    0.536    0.535    0.526    0.652    0.543    0.568     0.525
Temp (deg C):              63       60       60       62       61       63       52          
Junction (deg C):        n.a.       73       66       75       67       68       61          
Memory (deg C):          n.a.       76       80       78       80       82       80          
Fan Speed (%):             72       55       53       60       36       40       60  

have you tried to mine zill in another pool? and what commant did you write in start.bat? did you use g4? (difficulty = 4)

The developer has leave some configs in the zip or tar files... for the 4 pools. I have do it with EZIL, for the simplicity but you can pick the pool that you want. The only requirement this version is that the ETH Pool has to be ETHPROXY, the ZIL pool can be ETHProxy or ETHV1.

[1715104674]

1715104674

[1715104674]

1715104674

[1715104674]

1715104674

[1715104674]

1715104674

[divan0w]

I have rig with 6x570 and 8x580 in simplemining, unfortunately only with 4gb all.
 Gigabyte RX 570 4GB

1150/2050
900mV   14.32 MH/s
97 W   74°C / 41%


Someone got more than 17mh to a card?

[miner29]

I have rig with 6x570 and 8x580 in simplemining, unfortunately only with 4gb all.
 Gigabyte RX 570 4GB

1150/2050
900mV   14.32 MH/s
97 W   74°C / 41%


Someone got more than 17mh to a card?

Doesnt matter we are within a few weeks of 4gb cards not being able to mine ETH.  It is coming and inevitable.  Ive got a few 4gb rigs still able to mine 17-18.5mhs but in 15.5 hours it will drop again.  And ever 4.5days after that until  


570s
1145/2100/825

[jgonzi]

I have rig with 6x570 and 8x580 in simplemining, unfortunately only with 4gb all.
 Gigabyte RX 570 4GB

1150/2050
900mV   14.32 MH/s
97 W   74°C / 41%


Someone got more than 17mh to a card?

Doesnt matter we are within a few weeks of 4gb cards not being able to mine ETH.  It is coming and inevitable.  Ive got a few 4gb rigs still able to mine 17-18.5mhs but in 15.5 hours it will drop again.  And ever 4.5days after that until  


570s
1145/2100/825

Good config... @divan0W probably can reduce a little bit the Core Voltaje and increase the memory ... if it is stable.

[koppees]

I found out that the faster is your system's RAM speed, the more hashrate you still get from 4GB cards.

Looks like lolminer compensates missing GPU memory with the system RAM.

[Ortadan]

is it possible to mine eth + zil in the ethermine pool using the new lolminer 1.20 function? any example of the bat?

[jgonzi]

is it possible to mine eth + zil in the ethermine pool using the new lolminer 1.20 function? any example of the bat?

Yes of course... there are different examples in in the bat file...


This is only for EZIL.ME for example with ethermine, you should put the Workername and de Ethwallet and Zil Wallet. To enter ein EZIL.ME $ETHWALLET.$ZILWALLET.

Windows or Linux or SMOS:

--algo ETHASH --pool eu.ezil.me:5555 --user $ETHWALLET.$ZILWALLET --worker $WORKER  --enablezilcache --dualmode zil --dualstratum $ETHWALLET.$WORKER@eu1.ethermine.org:4444

HiveOS:


RaveOS


It is important to have a stable rig, a super undervolt Rig that for example crash on Epoch changes or similar it will probably crash. Only try to increase the Core Voltaje or reduce de Core Mhz...  to make it stable... I hat to do it in my rigs to start mining dual

[gathermind]

Hello,

   I always find huge effective fluctration between effectively 70HM/s and 40HM/s seen through the statistic from ethermine.org
Indeed, I am using 2x570 cards.  Is it normal with Lolminer?

   Moreover, there are different sites for me choosing asia1.ethermine.org, us1.ethermine.org, us2.ethermine.org, eu1.ethermine.org.
I discover sometimes when mining us1.ethermine.org with poor HM/s, I swap to eu1.ethermine.org with good HM/s.
Are different area pool sites independent?  Why Pool sites are not linked together to find new block?


Thanks for your helps!

[jgonzi]

Hello,

   I always find huge effective fluctration between effectively 70HM/s and 40HM/s seen through the statistic from ethermine.org
Indeed, I am using 2x570 cards.  Is it normal with Lolminer?

   Moreover, there are different sites for me choosing asia1.ethermine.org, us1.ethermine.org, us2.ethermine.org, eu1.ethermine.org.
I discover sometimes when mining us1.ethermine.org with poor HM/s, I swap to eu1.ethermine.org with good HM/s.
Are different area pool sites independent?  Why Pool sites are not linked together to find new block?


Thanks for your helps!

That's the luck... sometimes is more sometimes less but in long term is the average is correct...

[gathermind]

 I love luck!  So, I choose PPLNS minepool. 

[jgonzi]

I love luck!  So, I choose PPLNS minepool. 

If you are 24hours is better option...

[RAKOT]

Hello everyone!

Ive noticed such thing. If GPU is in main MB slot ( I mean 16x speed ) it hashes at 19-20 Mhs ( 389-390 epoch) , if GPU is on riser in the same main slot ( but of kz its 1x speed)  it hashes 15-16 max.

So PCIex speed is very important IMHO.

BR.

[jgonzi]

Hello everyone!

Ive noticed such thing. If GPU is in main MB slot ( I mean 16x speed ) it hashes at 19-20 Mhs ( 389-390 epoch) , if GPU is on riser in the same main slot ( but of kz its 1x speed)  it hashes 15-16 max.

So PCIex speed is very important IMHO.

BR.

It is they key in Zombie Mode you are right  ...

[koppees]

Hello everyone!

Ive noticed such thing. If GPU is in main MB slot ( I mean 16x speed ) it hashes at 19-20 Mhs ( 389-390 epoch) , if GPU is on riser in the same main slot ( but of kz its 1x speed)  it hashes 15-16 max.

So PCIex speed is very important IMHO.

BR.

It is they key in Zombie Mode you are right   ...

I just wanted post the same thing. Connect all of your 4GB cards directly to the motherboard, if possible of course. Do not use risers. I am still getting about 21.5 MH/S per card that way.

[jgonzi]

Hello everyone!

Ive noticed such thing. If GPU is in main MB slot ( I mean 16x speed ) it hashes at 19-20 Mhs ( 389-390 epoch) , if GPU is on riser in the same main slot ( but of kz its 1x speed)  it hashes 15-16 max.

So PCIex speed is very important IMHO.

BR.

It is they key in Zombie Mode you are right   ...

I just wanted post the same thing. Connect all of your 4GB cards directly to the motherboard, if possible of course. Do not use risers. I am still getting about 21.5 MH/S per card that way.

You will probably continue with nice hashrate 4 more EPOCHs...

[mrbugera2]

Testing version 1.20 with DUAL Mining EZIL... Using in my case a 2Miners pool ETH + EZIL for ZIL...  
It is important to have a stable rig, because if you have problems of cards going down on new DAG or too much undervolt, it can make stop working some card in the ZIL switch... If that happens look which card goes to 0 to increase the voltage for that card:

Statistics (00:22:18); Mining: Ethash
Connected to: eth.2miners.com:2020
Uptime: 1h 26m 3s
                        GPU 0    GPU 1    GPU 2    GPU 3    GPU 4    GPU 5    GPU 6     Total
Speed (mh/s):           93.74    49.71    49.77    52.99    53.02    49.77    49.83    398.83
Pool (mh/s):           103.10    38.87    57.47    43.94    60.85    32.11    60.85    397.19
Best Share:            496.8G   140.0G    88.5G   556.3G   436.8G   474.3G   353.5G    556.3G
Shares (A/S/Hw):       61/0/0   23/0/0   34/0/0   26/0/0   36/0/0   19/0/0   36/0/0   235/0/0
Power (W):              212.4     89.2     89.0     97.5     78.4     88.5     84.0     739.0
Efficiency (mh/s/W):    0.440    0.554    0.556    0.541    0.672    0.559    0.590     0.540
Temp (deg C):              63       60       60       62       61       64       52          
Junction (deg C):        n.a.       73       66       75       67       68       61          
Memory (deg C):          n.a.       76       80       80       80       82       80          
Fan Speed (%):             72       54       53       60       36       40       60          
---------------------------------------------
Average speed (10s): 93.79mh/s | 49.67mh/s | 49.68mh/s | 53.05mh/s | 52.96mh/s | 49.74mh/s | 49.82mh/s Total: 398.70 mh/s
GPU 5: Found a share of difficulty 16.44G
GPU 5: Share accepted (37 ms)
Eth: New job received: 0xcae4bb Epoch: 390 Target: 000000007e000000
Eth: New job received: 0xc37df3 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x7e74ac Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.82mh/s | 49.69mh/s | 49.66mh/s | 53.06mh/s | 52.93mh/s | 49.74mh/s | 49.81mh/s Total: 398.70 mh/s
Eth: New job received: 0xfe50f6 Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.72mh/s | 49.69mh/s | 49.66mh/s | 53.06mh/s | 52.90mh/s | 49.76mh/s | 49.86mh/s Total: 398.64 mh/s
Eth: New job received: 0x20bd98 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x59b662 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x570e43 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0xf6360f Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.80mh/s | 49.65mh/s | 49.65mh/s | 53.05mh/s | 52.93mh/s | 49.73mh/s | 49.85mh/s Total: 398.65 mh/s
Eth: New job received: 0x7d9c64 Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.78mh/s | 49.66mh/s | 49.65mh/s | 53.05mh/s | 52.96mh/s | 49.76mh/s | 49.70mh/s Total: 398.56 mh/s
Eth: New job received: 0xe62556 Epoch: 390 Target: 000000007e000000
Activating ZIL connection: ZIL shard epoch active.
Zil: New job received: 0xb7a494 Epoch: 0 Target: 000000007fd9e5ba
-------------------------------------------------------
         Generating light cache for epoch 0
-------------------------------------------------------
-------------------------------------------------------
     Done (525 ms), size of new DAG: 1024 MByte
-------------------------------------------------------
Start DAG gen on GPU 0 (normal mode)
Start DAG gen on GPU 1 (normal mode)
Start DAG gen on GPU 2 (normal mode)
Start DAG gen on GPU 5 (normal mode)
Start DAG gen on GPU 3 (normal mode)
Start DAG gen on GPU 6 (normal mode)
Start DAG gen on GPU 4 (normal mode)
Finished DAG gen on GPU 0 (457 ms)
Finished DAG gen on GPU 3 (1281 ms)
Finished DAG gen on GPU 1 (1333 ms)
Finished DAG gen on GPU 2 (1333 ms)
Finished DAG gen on GPU 4 (1343 ms)
Finished DAG gen on GPU 5 (1375 ms)
Finished DAG gen on GPU 6 (1434 ms)
Average speed (10s): 84.60mh/s | 40.48mh/s | 40.48mh/s | 43.87mh/s | 43.50mh/s | 40.48mh/s | 40.37mh/s Total: 333.77 mh/s
---------------------------------------------
Statistics (00:23:18); Mining: Ethash
Connected to: eu.ezil.me:5555
Uptime: 1h 27m 3s
                        GPU 0    GPU 1    GPU 2    GPU 3    GPU 4    GPU 5    GPU 6     Total
Speed (mh/s):           92.33    48.22    48.16    51.58    51.33    48.19    48.29    388.11
Pool (mh/s):           101.92    38.43    56.81    43.44    60.15    33.41    60.15    394.29
Best Share:            496.8G   140.0G    88.5G   556.3G   436.8G   474.3G   353.5G    556.3G
Shares (A/S/Hw):       61/0/0   23/0/0   34/0/0   26/0/0   36/0/0   20/0/0   36/0/0   236/0/0
Power (W):              212.4     89.5     89.4     97.5     78.3     88.3     84.5     739.9
Efficiency (mh/s/W):    0.434    0.536    0.535    0.526    0.652    0.543    0.568     0.525
Temp (deg C):              63       60       60       62       61       63       52          
Junction (deg C):        n.a.       73       66       75       67       68       61          
Memory (deg C):          n.a.       76       80       78       80       82       80          
Fan Speed (%):             72       55       53       60       36       40       60  

have you tried to mine zill in another pool? and what commant did you write in start.bat? did you use g4? (difficulty = 4)

The developer has leave some configs in the zip or tar files... for the 4 pools. I have do it with EZIL, for the simplicity but you can pick the pool that you want. The only requirement this version is that the ETH Pool has to be ETHPROXY, the ZIL pool can be ETHProxy or ETHV1.

lolMiner -a ETHASH --pool eth.altpool.pro --port 3840 --user [WALLET].[zil1...WALLET] --enablezilcache --ethstratum ETHPROXY

like this? and ethv1 is needed for nicehash as i know

[jgonzi]

Testing version 1.20 with DUAL Mining EZIL... Using in my case a 2Miners pool ETH + EZIL for ZIL...  
It is important to have a stable rig, because if you have problems of cards going down on new DAG or too much undervolt, it can make stop working some card in the ZIL switch... If that happens look which card goes to 0 to increase the voltage for that card:

Statistics (00:22:18); Mining: Ethash
Connected to: eth.2miners.com:2020
Uptime: 1h 26m 3s
                        GPU 0    GPU 1    GPU 2    GPU 3    GPU 4    GPU 5    GPU 6     Total
Speed (mh/s):           93.74    49.71    49.77    52.99    53.02    49.77    49.83    398.83
Pool (mh/s):           103.10    38.87    57.47    43.94    60.85    32.11    60.85    397.19
Best Share:            496.8G   140.0G    88.5G   556.3G   436.8G   474.3G   353.5G    556.3G
Shares (A/S/Hw):       61/0/0   23/0/0   34/0/0   26/0/0   36/0/0   19/0/0   36/0/0   235/0/0
Power (W):              212.4     89.2     89.0     97.5     78.4     88.5     84.0     739.0
Efficiency (mh/s/W):    0.440    0.554    0.556    0.541    0.672    0.559    0.590     0.540
Temp (deg C):              63       60       60       62       61       64       52          
Junction (deg C):        n.a.       73       66       75       67       68       61          
Memory (deg C):          n.a.       76       80       80       80       82       80          
Fan Speed (%):             72       54       53       60       36       40       60          
---------------------------------------------
Average speed (10s): 93.79mh/s | 49.67mh/s | 49.68mh/s | 53.05mh/s | 52.96mh/s | 49.74mh/s | 49.82mh/s Total: 398.70 mh/s
GPU 5: Found a share of difficulty 16.44G
GPU 5: Share accepted (37 ms)
Eth: New job received: 0xcae4bb Epoch: 390 Target: 000000007e000000
Eth: New job received: 0xc37df3 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x7e74ac Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.82mh/s | 49.69mh/s | 49.66mh/s | 53.06mh/s | 52.93mh/s | 49.74mh/s | 49.81mh/s Total: 398.70 mh/s
Eth: New job received: 0xfe50f6 Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.72mh/s | 49.69mh/s | 49.66mh/s | 53.06mh/s | 52.90mh/s | 49.76mh/s | 49.86mh/s Total: 398.64 mh/s
Eth: New job received: 0x20bd98 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x59b662 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0x570e43 Epoch: 390 Target: 000000007e000000
Eth: New job received: 0xf6360f Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.80mh/s | 49.65mh/s | 49.65mh/s | 53.05mh/s | 52.93mh/s | 49.73mh/s | 49.85mh/s Total: 398.65 mh/s
Eth: New job received: 0x7d9c64 Epoch: 390 Target: 000000007e000000
Average speed (10s): 93.78mh/s | 49.66mh/s | 49.65mh/s | 53.05mh/s | 52.96mh/s | 49.76mh/s | 49.70mh/s Total: 398.56 mh/s
Eth: New job received: 0xe62556 Epoch: 390 Target: 000000007e000000
Activating ZIL connection: ZIL shard epoch active.
Zil: New job received: 0xb7a494 Epoch: 0 Target: 000000007fd9e5ba
-------------------------------------------------------
         Generating light cache for epoch 0
-------------------------------------------------------
-------------------------------------------------------
     Done (525 ms), size of new DAG: 1024 MByte
-------------------------------------------------------
Start DAG gen on GPU 0 (normal mode)
Start DAG gen on GPU 1 (normal mode)
Start DAG gen on GPU 2 (normal mode)
Start DAG gen on GPU 5 (normal mode)
Start DAG gen on GPU 3 (normal mode)
Start DAG gen on GPU 6 (normal mode)
Start DAG gen on GPU 4 (normal mode)
Finished DAG gen on GPU 0 (457 ms)
Finished DAG gen on GPU 3 (1281 ms)
Finished DAG gen on GPU 1 (1333 ms)
Finished DAG gen on GPU 2 (1333 ms)
Finished DAG gen on GPU 4 (1343 ms)
Finished DAG gen on GPU 5 (1375 ms)
Finished DAG gen on GPU 6 (1434 ms)
Average speed (10s): 84.60mh/s | 40.48mh/s | 40.48mh/s | 43.87mh/s | 43.50mh/s | 40.48mh/s | 40.37mh/s Total: 333.77 mh/s
---------------------------------------------
Statistics (00:23:18); Mining: Ethash
Connected to: eu.ezil.me:5555
Uptime: 1h 27m 3s
                        GPU 0    GPU 1    GPU 2    GPU 3    GPU 4    GPU 5    GPU 6     Total
Speed (mh/s):           92.33    48.22    48.16    51.58    51.33    48.19    48.29    388.11
Pool (mh/s):           101.92    38.43    56.81    43.44    60.15    33.41    60.15    394.29
Best Share:            496.8G   140.0G    88.5G   556.3G   436.8G   474.3G   353.5G    556.3G
Shares (A/S/Hw):       61/0/0   23/0/0   34/0/0   26/0/0   36/0/0   20/0/0   36/0/0   236/0/0
Power (W):              212.4     89.5     89.4     97.5     78.3     88.3     84.5     739.9
Efficiency (mh/s/W):    0.434    0.536    0.535    0.526    0.652    0.543    0.568     0.525
Temp (deg C):              63       60       60       62       61       63       52          
Junction (deg C):        n.a.       73       66       75       67       68       61          
Memory (deg C):          n.a.       76       80       78       80       82       80          
Fan Speed (%):             72       55       53       60       36       40       60  

have you tried to mine zill in another pool? and what commant did you write in start.bat? did you use g4? (difficulty = 4)

The developer has leave some configs in the zip or tar files... for the 4 pools. I have do it with EZIL, for the simplicity but you can pick the pool that you want. The only requirement this version is that the ETH Pool has to be ETHPROXY, the ZIL pool can be ETHProxy or ETHV1.

lolMiner -a ETHASH --pool eth.altpool.pro --port 3840 --user [WALLET].[zil1...WALLET] --enablezilcache --ethstratum ETHPROXY

like this? and ethv1 is needed for nicehash as i know

True, but if I want to continue mining eth in 2miners or ethermine, you can use the new utility of dualmining. Also reducing mining time swap... but your option works perfectly too... for altpool

[jgonzi]

 Did you try it the dual Mining ETH+ZIL?

[jgonzi]

Less than 5 hours for the new Epoch ... let's see how are the new values of the Zombie Mode... I think it would be still profitable ETH...

[hogito]

I started using this miner and only first card get zombie tune, the rest cards mine with 15-16Mh. All cards are same, using latest hive os.

Which is your flightsheet config?... the version 1.19 use autotune... and takes 2 min per GPU

only --4g-alloc-size parameter is used

I'm struggling to get my RX570 flight sheet mining in HiveOs.  I am on the latest version of Hive/LOLminer.  I am using --4g-alloc-size 4072 in my tuning params.  Any suggestions?