lolMiner 1.64: Fastest Kaspa miner in market

[jgonzi]

Hello, i just try the new lolminer 1.32.

I use a 3070ti MSI Gaming X with HiveOS

Algo : AUTOLYKOS2

core clock fix to 1545 (i try with 1500 and same problem) and memory oc at 2700

My driver is up to date : 470.63.01

i try the parameter : --mode LHR2 but there is no difference in hashrate than 1.31
i also try with --lhrtune parameter with -20 the -15 ... no difference too

semi unlock only work on ethash ? or should it work with Autolykos2 too ?

Thanks a lot

EDIT : exactly the same issue with other RIG with 3060ti lhr v2

For 3060ti

Core 750
Memory 1750
PL 130

Will give you stable 113Mhs without problem
3070ti is more complicated:
I have seen:
Core 1590
Memory 350
PL 230

Try
Core -600
Memory 1900
PL 200

[singlass]

please someone help me out a whole gigabyte of vram is missing on ubuntu




command : dmesg | grep VRAM (shows nothing unusual)

[dedizonesv2]

please someone help me out a whole gigabyte of vram is missing on ubuntu




command : dmesg | grep VRAM (shows nothing unusual)

use VGA integred on motherboard don't use card !

[ekiller]

System: Amd rx 470-480 8GB  GPU's
Algo : Ethash - ETH
Tested drivers : AMd  18.20  -  20.30  - 20.40
Operation system : Linux (Simplemining)


Q:
Why Lolminer no tolerance about OC ?
All my GPU's mine with same OC value with other miners (no stale - no reject or reboot ) but when i use Lolminer too many GPU's start error and reboot.

Because of this  i need to lower my OC settings drastically with Lolminer

Is anyone else experiencing this?

[jgonzi]

System: Amd rx 470-480 8GB  GPU's
Algo : Ethash - ETH
Tested drivers : AMd  18.20  -  20.30  - 20.40
Operation system : Linux (Simplemining)


Q:
Why Lolminer no tolerance about OC ?
All my GPU's mine with same OC value with other miners (no stale - no reject or reboot ) but when i use Lolminer too many GPU's start error and reboot.

Because of this  i need to lower my OC settings drastically with Lolminer

Is anyone else experiencing this?

Could you share your OC to have an idea? that will help. About stale or reject, other miners don't check it you have them at the pool not in the rig.

[nevermind41]

System: Amd rx 470-480 8GB  GPU's
Algo : Ethash - ETH
Tested drivers : AMd  18.20  -  20.30  - 20.40
Operation system : Linux (Simplemining)


Q:
Why Lolminer no tolerance about OC ?
All my GPU's mine with same OC value with other miners (no stale - no reject or reboot ) but when i use Lolminer too many GPU's start error and reboot.

Because of this  i need to lower my OC settings drastically with Lolminer

Is anyone else experiencing this?

phoenix miner is the best so far for rx series. it has a lot parameter to tweak

[jgonzi]

System: Amd rx 470-480 8GB  GPU's
Algo : Ethash - ETH
Tested drivers : AMd  18.20  -  20.30  - 20.40
Operation system : Linux (Simplemining)


Q:
Why Lolminer no tolerance about OC ?
All my GPU's mine with same OC value with other miners (no stale - no reject or reboot ) but when i use Lolminer too many GPU's start error and reboot.

Because of this  i need to lower my OC settings drastically with Lolminer

Is anyone else experiencing this?

Have you been able to share your OC to try to help?

[jgonzi]

Trying different option for a 3060 RIG v2.

100Mhs at 80W
110Mhs at 100W




The efficiency in the 100Mhs is really good...

[jgonzi]

Trying different option for a 3060 RIG v2.

100Mhs at 80W
110Mhs at 100W




The efficiency in the 100Mhs is really good...

Core 1185
Memory 1750
PL 110

It is really a nice sweetpost

[Mashy81]

Now getting 55.3mhs and 53mhs from my 2 rtx 3070ti's.
Small improement with latest update.
Thanks for the hard work

[jgonzi]

Now getting 55.3mhs and 53mhs from my 2 rtx 3070ti's.
Small improement with latest update.
Thanks for the hard work

Really good values, what OC are you having?.

For me the easy now is the same flighsheet for all rigs with the new 1.33, that's perfect for modifications and changes. I don't need to change flightsheet if I take a GPU or add a new one.

[Mashy81]

Now getting 55.3mhs and 53mhs from my 2 rtx 3070ti's.
Small improement with latest update.
Thanks for the hard work

Really good values, what OC are you having?.

For me the easy now is the same flighsheet for all rigs with the new 1.33, that's perfect for modifications and changes. I don't need to change flightsheet if I take a GPU or add a new one.

+2000 memory
1200 locked core
170w power limit

[jgonzi]

Nice... I have updated to HiveOS today and RaveOS. So ready to use it

[jgonzi]

BEST LHR Miner :

https://www.youtube.com/watch?v=mVRvR8nDRiw

[batsonxl]

Hi guys. What do you recommend for rtx3060 LHR2 windows 10 x64bit. Which driver? Thanks

[RAKOT]

Hello!

So what shell we do with RX 4xx-5xx 4 Gbs ? 12-14 Mhs on ETH with Zombie mode. Prof. less then mining RVN or even ETC.

Can we squizz a little more from zombie mode, or its over ?

[DrX]

I hope we get nice numbers on new 6600, anyone tested  already?

[deedeeranged]

I hope we get nice numbers on new 6600, anyone tested  already?

Have a look at youtube dizzy mining https://www.youtube.com/watch?v=KOk2QHhgXe4

[deedeeranged]

How to use the --apiport for arguments?

I have enabled it with --apiport 10050 but than I only some json stuff when I use http://localhost:10050 so I am definetily missing something.

[jgonzi]

How to use the --apiport for arguments?

I have enabled it with --apiport 10050 but than I only some json stuff when I use http://localhost:10050 so I am definetily missing something.

That is used normally to communicate stats between OS and Miner.